A determination of the Cabibbo-Kobayashi-Maskawa parameter |V us| using KL decays

We present a determination of the Cabibbo-Kobayashi-Maskawa parameter |V(us)| based on new measurements of the six largest K(L) branching fractions and semileptonic form factors by the KTeV (E832) experiment at Fermilab. We find |V(us)|=0.2252+/-0.0008(KTeV)+/-0.0021(ext), where the errors are from KTeV measurements and from external sources. We also use the measured branching fractions to determine the CP violation parameter |eta(+-)|=(2.228+/-0.005(KTeV)+/-0.009(ext))x10(-3).     

Measurements of the Decay KL-->e+ e- mu+ mu-

The KTeV experiment at Fermilab has isolated a total of 132 events from the rare decay K(L)-->e+ e- mu+ mu-, with an estimated background of 0.8 events. The branching ratio of this mode is determined to be [2.69+/-0.24(stat)+/-0.12(syst)]x10(-9), with a radiative cutoff of M(2)(ee mu mu)/M(2)(K)>0.95. The first measurement using this mode of the parameter alpha from the D'Ambrosio-Isidori-Portolès (DIP) model of the K(L)gamma*gamma* vertex yields a result of -1.59+/-0.37, consistent with values obtained from other decay modes. Because of the limited statistics, no sensitivity is found to the DIP parameter beta. We use this decay mode to set limits on CP and lepton violation.     

Synthesis and applications of cyano‐vinylene‐based polymers containing cyclopentadithiophene and dithienosilole units for photovoltaic cells

Two β‐cyano‐thiophenevinylene‐based polymers containing cyclopentadithiophene ( CPDT‐CN ) and dithienosilole ( DTS‐CN ) units were synthesized via Stille coupling reaction with Pd(PPh₃)₄ as a catalyst. The effects of the bridged atoms (C and Si) and cyano‐vinylene groups on their thermal, optical, electrochemical, charge transporting, and photovoltaic properties were investigated. Both polymers possessed the highest occupied molecular orbital (HOMO) levels of about ?5.30 eV and the lowest unoccupied molecular orbital (LUMO) levels of about ?3.60 eV, and covered broad absorption ranges with narrow optical band gaps (ca. 1.6 eV). The bulk heterojunction polymer solar cell (PSC) devices containing an active layer of electron‐donor polymers ( CPDT‐CN and DTS‐CN ) blended with an electron‐acceptor, that is, [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM), in different weight ratios were explored under 100 mW/cm² of AM 1.5 white‐light illumination. The PSC device based on DTS‐CN: PC₇₁BM (1:2 w/w) exhibited a best power conversion efficiency (PCE) value of 2.25% with V_oc = 0.74 V, J_sc = 8.39 mA/cm², and FF = 0.36. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Self‐assembly of H‐bonded side‐chain and cross‐linking copolymers containing diblock‐copolymeric donors and single/double H‐bonded light‐emitting acceptors

A series of diblock‐copolymers were synthesized through anionic polymerization of styrene and tert‐butyl methacrylate (tBuA) with different monomer ratios, and analogous block‐copolymeric derivatives (PS‐b‐PAA)s with monofunctional carboxylic acid groups were obtained by further hydrolyzation as hydrogen‐bonded (H‐bonded) proton donors. Via H‐bonded interaction, these diblock‐coplymeric donors (PS‐b‐PAA)s were incorporated with luminescent mono‐pyridyl/bis‐pyridyl acceptors to form single/double H‐bonded supramolecules, that is, H‐bonded side‐chain/cross‐linking copolymers, respectively. The supramolecular architectures formed by donor polymers and light‐emitting acceptors were influenced by the ratio of acid blocks in the diblock copolymeric donors and the type of single/double H‐bonded light‐emitting acceptors. Their thermal and luminescent properties can be adjusted by H‐bonds, and more than 100 nm of red‐shifted photoluminescence (PL) emissions were observed, which depend on the degrees of the H‐bonding interactions. Self‐assembled phenomena of amphiphilic dibolck copolymers and their H‐bonded complexes were confirmed by TEM micrographs, and supramolecular microphase separation of spherical micelle‐like morphology was demonstrated to affect the photophysical properties. Polymer light‐emitting diode (PLED) devices containing H‐bonded complexes showed electroluminescence (EL) emissions of 503–560 nm under turn‐on voltages of 7.5–9.0 V, maximum power efficiencies of 0.23–0.37 cd/A (at 100 mA/cm²), and maximum luminances of 318–519 cd/m² (around 25 V). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4685–4702, 2009     

On the Analytical Derivation of Quantum Fisher Information and Skew Information for two Qubit X States

The quantum Fisher information defined via the symmetric logarithmic derivative and the skew information are two different aspects describing the information contents of quantum mechanical density operators. They are considered as natural generalizations of the classical Fisher information and constitute key ingredients in the emerging field of quantum metrology. In this paper, we give the analytical expression of quantum Fisher information and skew information for two-qubit system prepared in a two-qubit state of X type.

     

Influence of strain/stress on the nonlinear-optical properties of sprayed deposited ZnO:Al thin films

Nanocrystalline ZnO:Al thin films were deposited by reactive chemical pulverization spray pyrolysis technique on heated glass substrates at 450 °C to study their crystalline structure, composition, strain, stress, roughness characteristics and nonlinear optical susceptibility as a function of Al concentration (0, 2, 3, 5 at.%). The films were characterized by X-ray diffractometer (XRD), EDAX 9100 analyser, atomic force microscopy (AFM) and third harmonic generation (THG). The Al (3 at.%) doped ZnO thin films exhibited the lower strain/stress than undoped films. The nonlinear properties of the ZnO:Al thin films have been found to be influenced by the films strain/stress.     

slow release rubber formulations containing ZnSO4

Styrene butadiene (SBR) and natural rubber (NR) can be used as binding matrices to control the release of zinc (Zn) which is a micro-nutrient for plants. The leaching rate of zinc in an aqueous medium depends on the concentration of zinc sulphate loaded in the two types of rubber used, the temperature of the surrounding environment and the pH of the aqueous medium. Water uptake was increased with increasing concentration of ZnSO₄. The sustained release of zinc ions from the investigated formulations was prolonged for over five months. The mechanical properties of the vulcanizates were affected as the concentration of zinc sulphate changed.     

静电力平衡式微型硅加速度计方案分析

静电力平衡式微型硅加速度计是一种新型加速度计。本文对这种加速度计的３种典型方案进行了分析，导出静电力（力矩）、静电力平衡回路刚度（角刚度）及加速度测量范围的表达式。有关结果可为这种加速度计参数设计提供理论依据。     

Density functional theory study of hydrogen storage on Ni-doped C59X (X = B,N) heterofullerene

ABSTRACT

Hydrogen storage reactions on Ni ? C₅₉X(X = B, N) heterofullerene are investigated by using the state-of-the-art density functional theory calculations. The Ni atom prefers to bind at the bridge site between two hexagonal rings, and can bind up to five hydrogen molecules with average adsorption energies of (?0.94, ?0.48, ?0.33, ?0.25 and ?0.20 eV) per hydrogen molecule for Ni ? C₅₉B, while (?1.20, ?0.60, ?0.41, ?0.28 and ?0.23 eV) per hydrogen molecule for Ni ? C₅₉N. With no metal clustering, the system gravimetric capacities are expected to be as large as 10.87 and 10.85 wt % for 5H₂NiC₅₉B?and 5H₂NiC₅₉N, respectively. While the desorption activation barriers of the complexes 1H₂ + C₅₉X?(X = B, N)?are outside the Department of Energy domain (?0.2 to ?0.6 eV), the desorption activation barriers of the complexes nH₂ + C₅₉X(X = B, N)(n = 2 ? 5) are inside this domain. The hydrogen storage of the irreversible 1H₂ + NiC₅₉X?(X = B, N) and reversible 2H₂ + NiC₅₉X?(X = B, N) interactions is characterised in terms of density of states and projected densities of states, pairwise and non-pairwise additivity, infrared, Raman, electrophilicity and molecular electrostatic potentials.