Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

Chemical and thermal stability of alkanethiol and sulfur passivated InP(100)

InP(100) surfaces treated with Na2Sx9H20 and CnH(2n+1)SH are examined by contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy to determine the chemical and thermal behavior of these passivated surfaces. The surfaces coated by octadecanethiol (n = 18) self-assembled monolayers (SAMs) are found to be more stable toward oxidation than the S-passivated surface. The chemical stability of octadecanethiol SAMs in various environments is examined. The thiol monolayer is found to be stable in 0.1 M HCl but degrades in 0.1 M NaOH, boiling chloroform, and water. The behavior of these surfaces at elevated temperatures under a vacuum is also investigated. The octadecanethiol-coated InP(100) is stable up to 473 K, above which the films begin to degrade. Unlike other substrates on which the entire molecule including the sulfur headgroup desorbs together, on InP, the sulfur headgroup remains on the surface even after annealing to 673 K. These observations suggest that the desorption occurs by S-C bond cleavage as well as In-S bond cleavage. The sulfur of S-passivated InP is found to be more thermally stable than that of the octadecanethiol monolayer, perhaps due to their different bonding geometries and hence energies.     

A massively parallel electrochemical approach to the miniaturization of organic micro- and nanostructures on surfaces

This paper describes a simple and convenient strategy for reducing the dimensions of organic micro-and nanostructures on metal surfaces. By varying electrochemical desorption conditions, features patterned by dip-pen nanolithography or micro contact printing and made of linear alkanethiols or selenols can be gradually desorbed in a controlled fashion. The process is referred to as electrochemical whittling because the adsorbate desorption is initiated at the exterior of the feature and moves inward as a function of time. The whittling process and adsorbate desorption were studied as a function of substrate morphology, adsorbate head and tail groups, and electrolyte solvent and salt. Importantly, one can independently address different nanostructures made of different adsorbates and effect their miniaturization based upon ajudicious selection of adsorbate, applied potential, and supporting electrolyte. Some of the physical and chemical origins of these observations have been elucidated.     

Solid-supported monolayers and bilayers of amphiphilic beta-cyclodextrins

This paper describes the adsorption and spreading of beta-cyclodextrin (CD) vesicles on hydrophobic and hydrophilic substrates, which involves a transition from bilayer vesicles to planar molecular monolayers or bilayers. On substrates that are patterned with self-assembled monolayers by microcontact printing (muCP), the CD vesicles preferentially adsorb on hydrophobic areas instead of hydrophilic (nonionic) areas, and on cationic areas instead of hydrophilic (nonionic) areas. Supported monolayers of amphiphilic cyclodextrins CD1 and CD2 were obtained by adsorption of CD vesicles to hydrophobic substrates, and supported bilayers of amphiphilic cyclodextrins CD1 and CD2 were prepared by adsorption of CD vesicles on cationic substrates. Contact angle goniometry, atomic force microscopy and confocal fluorescence microscopy (CFM) were used to analyze the supported CD layers. The fluidity of the supported CD layers was verified using fluorescence recovery after photobleaching experiments. The supported layers function as a supramolecular platform that can bind suitable guest molecules through inclusion in the CD host cavities. Additionally, the CD host layers were patterned with fluorescent guest molecules by supramolecular muCP on the supported CD layers. The host-guest interactions were investigated with CFM and fluorescence resonance energy transfer experiments.     

Electrocatalytic oxidation of formic acid and methanol on Pt deposits on Au(111)

This work presents characteristics of Pt deposits on Au(111) obtained by the use of spontaneous deposition and investigated by electrochemical scanning tunneling microscopy (EC-STM). On such prepared and STM characterized Au(111)/Pt surfaces, we studied electrocatalytic oxidation of formic acid and methanol. We show that the first monatomic layer of Pt displays a (square root 3 x square root 3)R30 degrees surface structure, while the second layer is (1 x 1). After prolonged deposition, multilayer Pt deposits are formed selectively on Au(111) surface steps and are 1-20 nm wide and one to five layers thick. On the optimized Au(111)/Pt surface, formic acid oxidation rates are enhanced by a factor of 20 compared to those of pure Pt(111). The (square root 3 x square root 3)R30 degrees-Pt yields very low methanol oxidation rates, but the rates increase significantly with further Pt growth.     

Simple syntheses, structural diversity, and Tishchenko reaction catalysis of neutral homoleptic rare earth(II or III) 3,5-di-tert-butylpyrazolates--the structures of

The homoleptic rare-earth pyrazolate complexes [Sc(tBu2pz)3], [Ln2(tBu2pz)6] (Ln = La, Nd, Sm, Lu), [Eu4(tBu2pz)8] and the mixed oxidation state species [Yb2(tBu2pz)5] (tBu2pz = 3,5-di-tert-butylpyrazolate) have been prepared by a simple reaction between the corresponding rare-earth metal and 3,5-di-tert-butylpyrazole, in the presence of mercury, at elevated temperatures. In addition, [Yb2(tBu2pz)6] was prepared by redox transmetallation/ligand exchange between ytterbium, diphenylmercury(II) and tBu2pzH in toluene, whilst the same reactants in toluene under different conditions or in diethyl ether gave [Yb2(tBu2pz)5]. The complexes of the trivalent lanthanoids display dimeric structures [Ln2(tBu2pz)6] (Ln = La, Nd, Yb, Lu) with chelating eta2-terminal and eta2:eta2-bridging pyrazolate coordination. The considerably smaller Sc3+ ion forms monomeric [Sc(tBu2pz)3] of putative D3h molecular symmetry, with pyrazolate ligands solely eta2-bonded. [Eu4(tBu2pz)8] is a structurally remarkable tetranuclear EuII complex with two types of europium centres in a linear array. The outer two are bonded to one terminal and two bridging pyrazolates, and the inner two are coordinated by four bridging ligands. Unprecedented mu-eta5:eta2 pyrazolate ligation is observed, with each outer Eu2+ sandwiched between two eta5-bonded pyrazolate groups, which are also eta2-linked to an inner Eu2+. The two inner Eu2+ ions are linked together by two equally occupied components of each of two symmetry related, disordered pyrazolate groups with one component eta4:eta2 bridging and one eta3:eta2 bridging. [La2(tBu2pz)6] has also been shown to be a Tishchenko reaction catalyst with several organic substrates.     

High-performance liquid chromatography/electrospray ionization tandem mass spectrometry of hydroxylated uroporphyrin and urochlorin derivatives formed by photochemical oxidation of uroporphyrinogen I

Hydroxylated uroporphyrin I and urochlorin I derivatives formed by photochemical oxidation of uroporphyrinogen I were separated by high-performance liquid chromatography and fully characterized by electrospray ionization tandem mass spectrometry. The porphyrins and chlorins were identified by analysis of their product ion spectra with each hydroxylated derivative giving a characteristic collision-induced dissociation fragmentation pattern. The porphyrins and chlorins characterized were meso-hydroxyuroporphyrin I, alpha-hydroxypropionic acid uroporphyrin I, beta-hydroxypropionic acid uroporphyrin I, hydroxyacetic acid uroporphyrin I, trans-7-hydroxy-8-spirolactoneurochlorin I, cis-7-hydroxy-8-spirolactoneurochlorin I and trans- and cis-7,8-dihydroxyurochlorins I.     

Post-blast detection of traces of explosives by means of Fourier transform infrared spectroscopy

Samples obtained from debris after explosions of about 30 g of energetic materials were analyzed by means of Fourier transform infrared (FTIR) spectroscopy using both, Globar and synchrotron infrared radiation at the ISMI beamline of the Singapore synchrotron light source (SSLS). Low- and high-strength-of-explosion blasts were performed during each test run with the same explosive material. From the spectroscopic measurements, traces of unreacted explosives were found on more than 200 different materials that served as sample catchers in the explosions.The integrality of the experiments done confirmed that FTIR spectroscopy is a sufficiently sensitive method to detect traces of explosives in post-blast residues even of high-strength explosions. The method requires only a minimal amount of sample and enables accurate and very fast identification of the presence of explosive material. Finally, the synchrotron radiation infrared source provided one order of magnitude higher sensitivity compared to the conventional Globar source.     

Determination of trace elements in human serum by inductively coupled plasma atomic emission spectrometry with flow injection

An analytical method for the simultaneous determination of some trace elements (Au, Fe, Mg, Li, Sr, Zn) in human serum by inductively coupled plasma atomic emission spectrometry (ICP-AES) with flow injection is described. Physical interference caused by the change of sample viscosity is discussed. When 100 μl of serum was injected, the relevant recoveries of > 99% for Li, > 98% for Cu and Mg, > 95% for Fe were obtained for an NIST SRM with R.S.D. > 1.3% using optimized flow injection parameters. The prepared lyophilized control serum for routine analysis in clinical laboratories was analyzed and verified for the validity of the technique employed in this experiment using NIST SRM 909 as a primary reference material.