Pyrolysis mass spectrometry for distinguishing potential hoax materials from bioterror agents

Pyrolysis mass spectrometry (PyMS) was investigated as a rapid tool to distinguish potential bioterror hoax materials from samples containing pathogenic bacteria. A pyrolysis time-of-flight (TOF) mass spectrometer equipped with an alternative ionization technique, metastable atom bombardment (MAB), was used to produce sample spectra. These spectra were analyzed by principal component and discriminant analysis for pattern recognition. Materials investigated were two strains of Vibrio parahaemolyticus, one of which produced the tdh toxin, two Salmonella enterica serotypes, a biological mosquito control product containing spores of Bacillus thuringiensis, and several white to off-white powders (which could be used as hoax materials), such as flour, corn starch, methyl cellulose, and xanthan gum. PyMS distinguished bacterial samples from hoax materials. Furthermore, pattern analysis differentiated Vibrios from Salmonellae, Salmonella enterica Anatum from S. enterica Heidelberg, and the two V. parahaemolyticus strains from each other. The B. thuringiensis mixture was distinguished from other bacteria and powders, suggesting that PyMS with pattern recognition may differentiate samples containing pathogens, including Bacillus spp., from nonbiological agents and that it can be a rapid method for detection of bacteria. MS data acquisition took only 7 min for each sample.     

Preparation of PbO nanocrystals via decomposition of lead oxalate

The present study reports the preparation and characterization of PbO nanocrystals obtained via a thermal decomposition route. The PbO nanocrystals were synthesized using lead oxalate powder as a precursor. Nanostructured products were investigated by means of XRD, TEM, FT-IR and XPS. The XRD results indicate that tetragonal phase β-PbO with a particle size of about 30–45 nm was obtained when the intermediate precipitate was calcined at 500 °C.     

Sorption phenomena of organic solvents in polymers: Part I

In this work we use the vapor-sorption equilibrium data to show the degree of solvent upturn in each solvent-polymer system. For this purpose, 23 isothermal data sets for four polymer + solvent binaries, one block copolymer + solvent binary and for the corresponding polymer pairs have been used in the temperature range of 25-70 °C. Solvents studied are benzene, carbon tetrachloride, chloroform and pentane. Homopolymers studied are polyisobutylene, poly(ε-caprolactone), poly(ethylene oxide), n-heptadecane, polystyrene, poly(vinyl chloride), poly(vinyl methyl ether), and n-tetracosane.According to these data sets, solvent weight fraction in the polymer is plotted against solvent-vapor activity that is calculated assuming an ideal gas phase of pure solvent vapor neglecting the vapor pressure of the polymer. We use the Flory-Huggins theory to obtain dimensionless interaction parameter, χ. Also the Zimm-Lundberg clustering theory and non-ideality thermodynamic factor, Γ are used to interpret the equilibrium data.     

Column preconcentration and electrothermal atomic absorption spectrometric determination of rhodium in some food and standard samples

In the present work, an electrothermal atomic absorption spectrometric method has been developed for the determination of ultra‐trace amounts of rhodium after adsorption of its 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol/tetraphenylborate ion associated complex at the surface of alumina. Several factors affecting the extraction efficiency such as the pH, type of eluent, sample and eluent flow rates, sorption capacity of alumina and sample volume were investigated and optimized. The relative standard deviation for eight measurements of 0.1 ng/mL of rhodium was ±6.3%. In this method, the detection limit was 0.003 ng/mL in the original solution. The sorption capacity of alumina and the linear range for Rh(III) were evaluated as 0.8 mg/g and 0.015–0.45 ng/mL in the original solution, respectively. The proposed method was successfully applied for the extraction and determination of rhodium content in some food and standard samples with high recovery values.     

Methyl Methacrylate–Ethyleneglycol Dimethacrylate–Acrylic Acid Surface as Stationary Phase for Stir Bar Sorptive Extraction

A novel poly(methyl methacrylate–ethyleneglycol dimethacrylate–acrylic acid) film has been introduced for coating on stir bars to sorptive extraction (SBSE). The effects of different contents of porogen, monomer, cross-linker, modifier and initiator during the solvent or bulk polymerization step on the mechanical property and solvent resistant of prepared sorptive stir bars were investigated. The evaluation of results were caused to obtain the four prepared sorptive stir bars with good mechanical stability and excellent resistance to organic solvents. The extraction efficiency of these prepared sorptive stir bars were investigated by liquid desorption-liquid chromatography-ultraviolet detection (LD-LC-UV) using N-Nitrosodiphenylamine as target analyte. SBSE assays showed the sorptive stir bar that prepared using solution polymerization method had the better recovery for N-Nitrosodiphenylamine in water samples. This sorptive stir bar showed good linearity and acceptable recoveries, as well as advantages such as sensitivity, simplicity, low cost and high feasibility. Based on atomic force microscopy (AFM) results, the average pore size of optimum prepared stir bar using solvent polymerization method was obtained ~9 nm. The thermal gravity (TG) and differential scanning calorimetric (DSC) results showed this polyacrylate film has high thermal stability.     

Application of phosphotungstic acid–nickel composite-modified carbon paste electrode for electrocatalytic oxidation of methanol in alkaline solution

Phosphotungstic acid (PWA) was used for accumulation of nickel ions at the carbon paste electrode for preparation of PWA-modified CPE (PWA/CPE). The PWA was evenly mixed with graphite powder and paraffin oil. Then, for preparation of Ni/PWA/CPE, Ni ions were included onto the PWA/CPE surface through immersion method at open circuit condition. The scanning electron microscopy (SEM), energy-dispersive spectroscopy and electrochemical methods were used to verify the prepared electrodes. The SEM images reveal that morphology of the CPE was influenced by PWA addition. Application of the Ni/PWA/CPE for methanol oxidation was explored by various electrochemical techniques. Electrochemical response of methanol oxidation at the surface of Ni/PWA/CPE was 2.5 times higher than that Ni/CPE. The obtained results indicated that the modified electrode exhibited high electrocatalytic activity toward methanol oxidation. Then, catalytic rate constant was found to be 8.25 × 10⁴ cm³ mol ^?1 s^?1 using chronoamperometry method. Furthermore, the effects of several parameters, such as PWA loading, NiSO₄ concentration, accumulation time and methanol concentration toward methanol oxidation at the surface of this modified electrode as well as stability, have been investigated.     

Green synthesis of pyrrolo isoquinolines using in situ synthesis of 4-hydroxycumarines: Study of antioxidant activity

In this research, synthesis of pyrrolo isoquinoline derivatives in excellent yields was performed using the multicomponent reaction of isoquinoline, alkyl bromides, 2-hydroxyacetophenone, or its derivatives, dimethyl carbonate as a green reagent and KF/clinoptinolite nanoparticles as a catalyst in the aqueous media at 80°C. The Punica granatum peel water extract was used as the green media for the synthesis of PG-KF/clinoptilolite nanoparticles in high yield. The PG-KF/clinoptilolite nanoparticles show a significant basic catalytic role in these reactions in preparing the product in high yield and used for several times. In addition, for studying the antioxidant ability of some of the synthesized compounds, diphenyl-picrylhydrazine (DPPH) radical trapping and power of ferric reduction tests are employed. The short time of the reaction, high yields of the product, easy separation of the catalyst and products are some of the advantages of this procedure.     

NMR spectral analysis of strongly second-order 6-, 8-, 9- and 10- spin-systems (1H─19F, 19F─19F,and 13C─19F) in perfluorotoluyl- and tetrafluoro-pyridyl-aromatics using the lineshape method ANATOLIA

A simple to use nuclear magnetic resonance analysis method has been tested on complex ¹H, ¹⁹F, and ¹³C multiplets. This open-source line-shape analysis method analysis of total lineshape (ANATOLIA)¹ provides some significant advantages over traditional assign-iterate methods of NMR spectral analysis by avoiding false minima and progressing optimisation to the global minimum. The target molecules are 1-perfluorotol-4-yl-2-perfluorotol-4-yl-oxymethyl-1H-benzimidazole (molecule-I) and 1-tetrafluoropyrid-4-yl-2-tetrafluoropyrid-4-yl-thio-1H-benzimidazole (molecule-II) which were produced as part of a family of fluorinated drug scaffolds prepared for anticancer and antiparasitic screening. Spectra display significant second-order effects with ¹H Δδ = 3.68 and 4.67 Hz for the aromatic hydrogen “triplets”, with ¹⁹F ⁴J_AA', ⁴J_BB', ⁴J_XX', and ⁴J_YY' coupling constants range from +4.8 to −14.0 Hz and for ¹³C-isotopomers ¹⁹F Δδ of up to 111.56 Hz. A spin-system of six coupling nuclei (H_aH_bH_cH_d F_YF_Y') was analysed in 12 s, a spin-system of nine coupling fluorine nuclei (AA'BB'CCC-YY') was analysed within 2 min, and 10 coupling nuclei (XX'YY'ZZZ-BB'-H_d) was optimised in 6 min using a laptop computer. ANATOLIA was also robust enough to be able to yield accurate spectral values from inaccurate input values. In both compounds, a fluorine–fluorine coupling constant was identified between the two fluoro-aromatic rings (F_BB' and F_YY') of +4.05 and +4.67 Hz and attributed to a through-space interaction. Ab initio structure optimisations and coupling constant calculations provided useful input data for spectral analysis. A modern ¹⁹F nuclear magnetic resonance spectrum of perfluorotoluene (octafluorotoluene) and analysis from 1975 was used as a test data set to assess ANATOLIA.     

Spectral Investigations of Preferential Solvation and Solute–Solvent Interactions of Free Base and Protonated 5,10,15,20-Tetrakis(4-trimethyl-ammonio-phenyl)-porphine Tetratosylate in Aqueous Organic Mixed Solvents

The solvatochromic properties of the free base and the protonated 5,10,15,20-tetrakis(4-trimethyl-ammonio-phenyl)-porphine tetratosylate (TTMAPP) were studied in pure water, methanol, ethanol, 2-propanol, and their corresponding aqueous mixtures. The correlation of the empirical solvent polarity scale (E _T) values of TTMAPP with composition of the solvents were analyzed by the solvent exchange model of Bosch and Roses to clarify the preferential solvation of the probe dyes in the binary mixed solvents. The solvation shell composition effects in preferential solvation of the solute dyes were investigated in terms of both solvent–solvent and solute–solvent interactions and also the local mole fraction of each solvent composition was calculated in the cybotactic region of the probe. The effective mole fraction variation may provide significant physicochemical insights in the microscopic and molecular level of interactions between TTMAPP species and the solvent components and, therefore, can be used to interpret the solvent effect on kinetics and thermodynamics of TTMAPP.     

Quantitative Analysis of Holmium Ion by a Ho3+ Ion‐Selective Sensor Based on a Symmetric Thio‐Schiff's Base

A poly(vinyl chloride) (PVC) membrane sensor for holmium ions was fabricated based on N‐[(Z)‐1‐(2‐thienyl)‐ methylidene]‐N‐[4‐(4‐{[(Z)‐1‐(2‐thienyl)methylidene]amino} phenoxy)phenyl] amine (TPA) as a new ion carrier, acetophenon (AP) as plasticizing solvent mediator and sodium tetraphenyl borate (NaTPB) as an anion excluder. The electrode shows a good selectivity towards Ho³⁺ ions respect to other inorganic cations, including alkali, alkaline earth, transition and heavy metal ions. The constructed sensor displays a Nernstian behavior (19.5±0.3 mV/decade) over the concentration range of 1.0×10⁻⁶ to 1.0×10⁻² mol·L⁻¹ with the detection limit of the electrode being 4.6×10⁻⁷ mol·L⁻¹ and very short response time (ca. 5 s). It has a useful working pH range of 3.2–9.8 for at least 8 weeks. The electrode was successfully applied as an indicator electrode for the potentiometric titration of a Ho³⁺ solution with EDTA and holmium determination in some alloys. The proposed sensor accuracy was studied by the determination of Ho³⁺ in mixtures of three different ions.