Bilaminar pattern of tibial condyle cartilage layer on the fat-suppressed 3D gradient echo images: artifact or structural and biochemical difference in composition of cartilage?

The purpose of this study was to examine if an unusual bilaminar pattern of lateral tibial condyle cartilage layer on the fat-suppressed three-dimensional (3D) spoiled gradient echo sequence is artifactual or correlates with structural and/or biochemical composition of cartilage. The laminar appearance of the lateral tibial condyle cartilage layer was studied on fat-suppressed 3D spoiled gradient echo MR images of the knee joint in 67 patients (mean age: 28y) performed at 1.0 Tesla. After i.v. administration of gadopentetate dimeglumine, diffusion of the contrast media into cartilage layer was qualitatively analysed over time on inversion recovery spin echo images of knee joints of five asymptomatic volunteers (mean age: 25y). In a patient with osteosarcoma and total knee replacement, MR examination of cartilage layer of lateral tibial plateau was compared with histologic specimens stained with Safranin-O, demonstrating proteoglycan distribution in cartilage. The retrospective analysis of 67 knee joints revealed a bilaminar appearance of lateral tibial condyle cartilage layer in the gradient echo images in the majority of cases (81%) with a statistically significant tendency to a trilaminar pattern in patients older than 20 years. With i.v. contrast administration, the contrast enhancement was only observed in the superficial zone of tibial cartilage layer. Histologic specimens in one patient demonstrated a good correlation between thickness of proteoglycan-free and proteoglycan-rich laminae of lateral tibial condyle on Safranin-O staining with hyperintense and hypointense zones, respectively, on corresponding fat-suppressed 3D spoiled gradient echo images (correlation coefficient of 0.87). Bilaminar pattern of tibial condyle cartilage layer on fat-suppressed 3D spoiled gradient echo images in younger subjects is not an artifact or an intrachondral lesion, but it may represent a regional difference in composition of extracellular cartilage matrix possibly produced by a highly-oriented collagen fiber structure associated with a high concentration of proteoglycans in the middle and deep portion of the cartilage layer.     

Quantitative evaluation of the lactate signal loss and its spatial dependence in press localized (1)H NMR spectroscopy

Localized (1)H NMR spectroscopy using the 90 degrees -t(1)-180 degrees -t(1)+t(2)-180 degrees -t(2)-Acq. PRESS sequence can lead to a signal loss for the lactate doublet compared with signals from uncoupled nuclei which is dependent on the choice of t(1) and t(2). The most striking signal loss of up to 78% of the total signal occurs with the symmetrical PRESS sequence (t(1)=t(2)) at an echo time of 2/J (approximately 290 ms). Calculations have shown that this signal loss is related to the pulse angle distributions produced by the two refocusing pulses which leads to the creation of single quantum polarization transfer (PT) as well as to not directly observable states (NDOS) of the lactate AX(3) spin system: zero- and multiple-quantum coherences, and longitudinal spin orders. In addition, the chemical shift dependent voxel displacement (VOD) leads to further signal loss. By calculating the density operator for various of the echo times TE=n/J, n=1, 2, 3,..., we calculated quantitatively the contributions of these effects to the signal loss as well as their spatial distribution. A maximum signal loss of 75% can be expected from theory for the symmetrical PRESS sequence and TE=2/J for Hamming filtered sinc pulses, whereby 47% are due to the creation of NDOS and up to 28% arise from PT. Taking also the VOD effect into account (2 mT/m slice selection gradients, 20-mm slices) leads to 54% signal loss from NDOS and up to 24% from PT, leading to a maximum signal loss of 78%. Using RE-BURP pulses with their more rectangular pulse angle distributions reduces the maximum signal loss to 44%. Experiments at 1.5 T using a lactate solution demonstrated a maximum lactate signal loss for sinc pulses of 82% (52% NDOS, 30% PT) at TE=290 ms using the symmetrical PRESS sequence. The great signal loss and its spatial distribution is of importance for investigations using a symmetrical PRESS sequence at TE=2/J.     

Evidence for excited 0+ states in94Sr

Beta-delayed neutron measurements on⁹⁵Rb have indicated evidence for two heretofore unknown excited O⁺ states in⁹⁴Sr which are not fed by ß -decay from the J^π = 3^? ground state of⁹⁴Rb.     

Exchange coupled magnetic nanocomposites of Sm(Co1−xFex)5 / Fe3O4 with core/shell structure

Magnetic nanocomposites of Sm(Co_1−xFe_x)₅/Fe₃O₄ (x≈0.1) with the core/shell type structure were successfully fabricated using a two-step polyol process, where as-prepared SmCo_5(1−x) nanoparticles were used as seeds for the ferrite coating. The core/shell composites are quite stable in air and show a typical hysteric behavior of single component, yielding an enhanced coercivity of 2.2 kOe with a saturated magnetization of 130 emu/g at 5 T. The magnetization data clearly reveal the presence of effective exchange coupling between the hard-magnetic Sm(Co_1−xFe_x)₅ core and soft-magnetic Fe₃O₄ shell, suggestive of a single-phase structure rather than a distinctive two-phase one.     

Multiplicity studies and effective energy in ALICE at the LHC

In this work we explore the possibility to perform “effective energy” studies in very high energy collisions at the CERN large hadron collider (LHC). In particular, we focus on the possibility to measure in pp collisions the average charged multiplicity as a function of the effective energy with the ALICE experiment, using its capability to measure the energy of the leading baryons with the zero degree calorimeters. Analyses of this kind have been done at lower centre-of-mass energies and have shown that, once the appropriate kinematic variables are chosen, particle production is characterized by universal properties: no matter the nature of the interacting particles, the final states have identical features. Assuming that this universality picture can be extended to ion–ion collisions, as suggested by recent results from RHIC experiments, a novel approach based on the scaling hypothesis for limiting fragmentation has been used to derive the expected charged event multiplicity in AA interactions at LHC. This leads to scenarios where the multiplicity is significantly lower compared to most of the predictions from the models currently used to describe high energy AA collisions. A mean charged multiplicity of about 1000–2000 per rapidity unit (at η∼0) is expected for the most central Pb–Pb collisions at . In memory of A. Smirnitskiy     

Surface redox induced bipolar switching of transition metal oxide films examined by scanning probe microscopy

The bipolar resistive switching mechanisms of a p-type NiO film and n-type TiO₂ film were examined using local probe-based measurements. Scanning probe-based current–voltage (I–V) sweeps and surface potential/current maps obtained after the application of dc bias suggested that resistive switching is caused mainly by the surface redox reactions involving oxygen ions at the tip/oxide interface. This explanation can be applied generally to both p-type and n-type conducting resistive switching films. The contribution of oxygen migration to resistive switching was also observed indirectly, but only in the cases where the tip was in (quasi-) Ohmic contact with the oxide.     

Fabrication of nano-structured polythiophene nanoparticles in aqueous dispersion

The synthetic route of unsubstituted polythiophene (PT) nanoparticles was investigated in aqueous dispersion via Fe³⁺-catalyzed oxidative polymerization. With this new synthetic method, high conversion of thiophene monomers was obtained with only a trace of FeCl₃. The dispersion state showed that the PT nanoparticles were well dispersed in many polar solvents, compared to non-polar solvents, such as acetone, chloroform, hexane, and ethyl acetate. To compare the photoluminescence properties between PT nanoparticle dispersion and PT bulk polymers, the PL intensities were measured in the same measuring conditions. Further, core–shell poly(styrene/thiophene) (poly(St/Th)) latex particles were successfully prepared by Fe³⁺-catalyzed oxidative polymerization during emulsifier-free emulsion polymerization. The different polymerization rates of each monomer resulted in core–shell structure of the poly(St/Th) latex particles. The PL data of the only crumpled shells gave evidence that the shell component of core–shell poly(St/Th) latex particles is indeed PT, which was corroborated by SEM data. PL intensity of the core–shell poly(St/Th) nanoparticle dispersion was much higher than that of the PT nanoparticle dispersion, due to its thin shell layer morphology, which was explained by the self-absorption effect.     

Ultrasound-assisted synthesis of Li-rich mesoporous LiMn2O4 nanospheres for enhancing the electrochemical performance in Li-ion secondary batteries

The hierarchically structured mesoporous LiMn₂O₄ (LMO) nanospheres were synthesized using a template-free self-assembly process that was coupled with ultrasound (U). The ultrasound technique suggested here is very powerful for controlling an ordered nanostructure and improving crystallinity with large single-crystalline domains. Owing to the hierarchical mesoporous structure and high crystallinity, U-LMO provides an excellent rate capability and cycle stability with a capacity retention of more than 98% up to 50 cycles at a 0.2 C rate. Here, we demonstrate that mesoporous U-LMO nanospheres were fabricated to enhance the electrochemical performance and protect it from structurally significant collapsing because of high crystallinity.