Langmuir-Blodgett self-assembly and electrochemical catalytic property of FePt magnetic nano-monolayer

Dispersed-well FePt nanoparticles with particle size ~5 nm have been prepared by hydrazine hydrate reduction of H₂PtCl₆·6H₂O and FeCl₂·4H₂O in ethanol–water system. By employing as-synthesized FePt nanoparticles, the monolayer can be formed by LB Technique. The structural, magnetic properties and electrochemical properties of FePt monolayer were respectively studied by XRD, TEM, VSM and CHI 820 electrochemical workstation. The as-synthesized particle has a chemically disordered fcc structure and can be transformed into chemically ordered fct structure after annealing treatment above 400°C. The coercivity of ordered fct FePt phase can be up to 2515Oe. CVs of 0.5 M H₂SO₄/0.5M CH₃OH on GCE modified with FePt nanoparticles monolayer films illustrate that the as-synthesized FePt is a kind of active electrochemical catalyst.     

New side-pump scheme for large mode area fiber lasers by wrapping polished fibers conjugate caustic removed

With the purpose of uniform gain coefficient along the axial direction in the core of gain guided and index anti-guided fiber, a new kind of side-pump scheme by wrapping particularly treated fibers around the central GGIAG fiber is reported in this paper. According to leakage mode analysis on wrapped fiber and numerical simulation on this pumping structure having ytterbium doped central fiber and conventional wrapped side fiber, we find this kind of pump scheme can improve the uniformity of gain coefficient along the fiber direction, and also, it can support multi channels of pumping sources by adding more side fibers to improve the total effective incident pumping power.     

无线传感器网络中继节点布居算法的研究

本文表述的是在该应用背景下引入多约束条件, 并采用枚举法与贪婪寻优算法相结合的方法, 解决了在可以作为中继节点设置位置的预设中继节点位置集合内, 合理选择中继节点设置位置以及既存网络因添加新传感器节点所引起的中继节点追加的问题. 仿真实验表明, 本文提出的中继节点布居与追加优化算法能够保证多约束条件下网络的容错性. 同时提出的基于最小网络距离因子评价标准, 有效提高了中继节点布居算法的能效性.     

ICP-AES测定高浓度基体下杂质元素的偏最小二乘法研究

建立了ICP-AES测定高浓度基体中微量杂质元素的偏最小二乘方法(PLS)。研究表明,PLS能有效校正高浓度基体干扰引起的测量误差,比多元光谱拟合法(MSF)能承受的基体浓度更高。当基体与杂质的含量比为1 000∶1～20 000∶1时,该方法的加标回收率在95%～105%之间。对于干扰效应与基体浓度呈非线性相关的体系,普通PLS的预测准确度不高,但使用基于样品浓度矩阵变换的偏最小二乘法(LIN-PPLS),则明显改善了预测的准确度。分别用MSF、普通PLS和LIN-PPLS对水系沉积物国家标准物质GBW07312中的Co,Pb和Ga进行测定,结果表明,LIN-PPLS的预测准确度优于普通PLS,而普通PLS的预测准确度优于MSF。     

Czerny-Turner正交型光栅单色仪的波长校准

研究了Czerny-Turner正交型光栅单色仪的波长校准技术。结合单色仪的结构参数和特点,提出以符合光栅方程的正弦曲线作为仪器出射波长的校准方程,基于最小二乘法原理给出校准方程的拟合残差表达式,由于校准方程的非线性,应用二维Nelder-Mead单纯形法求解拟合残差的待定系数,建立了波长与光栅转角的精确表达式,并通过实验验证了该算法的准确性。结果表明,经过校准的单色仪波长定位精度小于0.1nm,比设计要求提高一个数量级。该方法在Czerny-Turner正交型光栅单色仪的波长校准过程中,应用简单,容易实现,只需稍加修改步进电机的控制程序,即可完成对仪器出射波长的快速实时校准,实用性强。     

ICP-MS法测定不同采收时间宽叶荨麻中微量元素含量

采用微波消解,ICP-MS法分析不同采收时间宽叶荨麻中18种微量元素Al,Ba,Ca,Co,Cr,Cu,Fe,K,Li,Mg,Mn,Mo,Na,Ni,P,Pb,S和Zn的含量。该方法的相对标准偏差在1.2%～5.3%之间,加标回收率在95.4%～101.2%之间。结果表明宽叶荨麻中K,P,S,Ca,Na含量较高;Fe,Mg,Mn,Zn含量次之;有潜在生理毒性的元素Al,Cr,Pb的含量较低,并且在宽叶荨麻中微量元素呈现明显的季节性动态变化,此结果为进一步研究宽叶荨麻药理药效与微量元素的关系以及更好的开发这一资源提供理论数据。     

反应扩散系统中波传播的锁频现象

在空间延展系统中,当增强外部光强时,作者观察到波传播的N∶N-1(N≥2)锁频现象.此现象是在光敏BZ反应实验中观察到的.通过构建一个映射函数,发现在波周期和外部光强的关系中存在魔鬼阶梯,并且此阶梯与实验数据相吻合.     

Directed segregation in compartmentalized bi-disperse granular gas

A bi-disperse granular gas in an asymmetrical two-compartment system is studied experimentally.The presence of asymmetry within the range of our experimental parameters results in a directed segregated state and a directed clustering state.This deterministic system does not depend on the initial conditions.A modified flux model based on Lohse’s flux model for bi-disperse granular gases is derived.The modified flux model explains qualitatively the experimental results.     

New Explicit Rational Solitary Wave Solutions for Discretized mKdV Lattice Equation

In this letter, we study discretized mKdV lattice equation by using a new generalized ansatz. As a result,many explicit rational exact solutions, including some new solitary wave solutions, are obtained by symbolic computation code Maple.     

Raman and IR spectroscopy study of corrosion products on the surface of the hot‐dip galvanized steel with alkaline mud adhesion

The corrosion products formed on hot‐dip galvanized steel sheets for the automobile application with adhesion of alkaline mud containing different Cl⁻ ion contents are investigated by means of Raman and infrared (IR) spectroscopy. Results show that the Cl⁻ ion content in alkaline mud has great influence on the corrosion behavior of the galvanized steel. The Cl⁻ ions are responsible for the formation of the Zn₅Cl₂(OH)₈· H₂O layer on the surface of the steel at the early stage of corrosion. The rest of the Cl⁻ ions then penetrate and interrupt corrosion product layer resulting in pitting corrosion. Subsequently, the red corrosion product of α‐FeOOH (shaped as needle‐like structure) is formed, which then transforms into black rust of Fe₃O₄ (having a shape of slim needle). It is interesting to find out that pitting depth is inversely proportional to the Cl⁻ ion content. However, corrosion rate decreases with the increase of the Cl⁻ ions in mud. Copyright © 2009 John Wiley & Sons, Ltd.