Conjugated copolymers comprised cyanophenyl‐substituted spirobifluorene and tricarbazole‐triphenylamine repeat units for blue‐light‐emitting diodes

A series of conjugated blue‐light‐emitting copolymers, PTC‐1 , PTC‐2 , and PTC‐3, comprised different ratios of electron‐withdrawing segments (spirobifluorene substituted with cyanophenyl groups) and electron‐donating segments (tricarbazole‐triphenylamines), has been synthesized. The structures of these polymers were characterized and their thermal, photophysical, electrochemical, and electroluminescence properties were measured. Incorporation of rigid spirobifluorene units into the copolymers led to blue‐shifted absorption peaks in dilute toluene solution. Cyclic voltammetric measurement indicated the bandgaps of the polymers were in the range of 2.77–2.94 eV. It was found that increasing cyanophenyl‐spirobifluorene content in the polymer backbone lowered both the HOMO and LUMO energy levels of the copolymers, which was beneficial for electron injection/transporting in the polymer layer of the device. OLED device evaluation indicated that all the polymers emitted sky blue to deep blue light when the pure polymers were used as the emissive layers in the devices with a configuration of ITO/PEDOT:PSS/polymers/CsF/Ca/Al. The devices have been optimized by doping 30 wt % PBD into the polymer layers. Among the doped devices, PTC‐2 showed the best performance with the turn‐on voltage of 3.0 V, maximum brightness of 7257 cd/m², maximum current efficiency of 1.76 cd/A, and CIE coordinates of (0.15, 0.14). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 292–301, 2010     

脂质组成对硫辛酸脂质纳米粒的制备及其稳定性的影响

采用高压均质法制备硫辛酸(ALA)脂质纳米粒(ALA-NLC),确定了负载ALA的最佳体系。通过高效液相色谱、动态光散射、流变等测试研究了脂质成分、含量对ALA负载、ALA-NLC稳定性和分散液流变性质的影响,并用原子力显微镜观察了ALA-NLC的形貌。结果表明,脂质/ALA质量比在4.5∶1～6∶1之间,得到的脂质纳米粒分散均匀,颗粒规则;脂质中液态油脂的增加有利于保持ALA-NLC的粒径,储存稳定性和分散液的低粘度,并得到两个有望用于食品工业的ALA-NLC配方。     

Copper‐catalyzed asymmetric 1,4‐conjugate addition of dialkylzinc to enones

Asymmetric 1,4‐conjugation addition of dialkylzinc (diethylzinc and dimethylzinc) to cyclic enones, chalcone and nitroalkenes was achieved by a 25 mol% (R)‐6,6′‐Br₂‐BINOL( 1f ), 25 mol% CuSPh and 100 mol% dicyclohexylmethylamin(Cy₂NMe) catalyst system. The Cu(I) catalyst system enables the cyclic enone, chalcone and nitroalkene generality with high enantioselectivity (up to 84% ee) and isolated yield (up to 94%) under mild reaction conditions. Copyright © 2010 John Wiley & Sons, Ltd.     

A SPECIAL CUBIC SYSTEM CLOSE RELATED TOTHE GENERAL QUADRATIC SYSTEM

1NumberandDistributionofCriticalPoilltsConsiderthefollowingcubicsystem:itcontainsonlytwocubictermspx'andqx'morethanthegeneralquadraticsystem:Thecoordinatesofthecriticalpointsatinfinityof(1)mustsatisfytheequation:px'y~qx'=0.(3)SoA(P,q,0)andB(0,l,0)aretheonlycriticalpointsatinfinityof(1).Itiseasilyseenthatthetwocharacteristicrootsof(1)atAareAl=AZ=--p,soAisastable(unstable)nodewhenp>0(<0).Moreover,Bisahigherordercriticalpointatinfinityof(1)withindex0,itisthepileupof3criticalpointsontheequat…     

Ultrafast optical switching in Kerr nonlinear photonic crystals

Nonlinear photonic crystals made from polystyrene materials that have Kerr nonlinearity can exhibit ultrafast optical switching when the samples are pumped by ultrashort optical pulses with high intensity due to the change of the refractive index of polystyrene and subsequent shift of the band gap edge or defect state resonant frequency. Polystyrene has a large Kerr nonlinear susceptibility and almost instantaneous response to pump light, making it suitable for the realization of ultrafast optical switching with a response time as short as a few femtoseconds. In this paper, we review our experimental progress on the continual improvement of all-optical switching speed in two-dimensional and three-dimensional polystyrene nonlinear photonic crystals in the past years. Several relevant issues are discussed and analyzed, including different mechanisms for all-optical switching, preparation of nonlinear photonic crystal samples by means of microfabrication and self-assembly techniques, characterization of optical switching performance by means of femtosecond pump-probe technique, and different ways to lower the pump power of optical switching to facilitate practical applications in optical information processing. Finally, a brief summary and a perspective of future work are provided.     

Image magnification based on similarity analogy

Aiming at the high time complexity of the decoding phase in the traditional image enlargement methods based on fractal coding, a novel image magnification algorithm is proposed in this paper, which has the advantage of iteration-free decoding, by using the similarity analogy between an image and its zoom-out and zoom-in. A new pixel selection technique is also presented to further improve the performance of the proposed method. Furthermore, by combining some existing fractal zooming techniques, an efficient image magnification algorithm is obtained, which can provides the image quality as good as the state of the art while greatly decrease the time complexity of the decoding phase.     

A Novel Ion‐Selective Electrode for Determination of the Mercury(II) Ion Based on Schiff Base as a Carrier

A new poly(vinyl chloride) (PVC) membrane ion‐selective electrode based on bis‐salicyladehyde‐diaminjodipropylamine (BSDDA) as an ion carrier was successfully applied to the detection of Hg²⁺ ions. This electrode displayed good selectivity toward Hg²⁺ in comparison with other metal ions and exhibited a Nernstian slope of 30.5 ± 0.4 mV per decade of Hg²⁺ over a concentration range of 9.5 × 10^?7 to 6.4 × 10^?2 M of Hg²⁺ in the pH range 1.5 to 3.5. The detection limit was 7.0 ± 0.2 × 10^?7 M and response time was about 10 s to 25 s. The electrode can be used at least 2 months without apparent divergence in potential. In addition, the effects of experimental parameters such as membrane composition, nature and amounts of plasticizer and additive were investigated. The proposed electrode could be used as an indicator electrode in the detection of Hg²⁺ in samples.     

Computing the Degree-4 Shortest Network under a Given Topology

Let F be a set of n (n being an even number) fixed points and let M be a set of n / 2 -1 moving points, whose locations are to be determined, in the plane. A topology is a set of edges connecting these points in the set V=F\cup M . Let E be a full 4-degree Steiner topology; i.e., the topology forms a tree which contains fixed points of degree 1 and moving points of degree 4, and let H(E) be a set of topologies which include E and its degeneracies. We define a canonical tree over V as one whose topology belongs to H(E) and in which the sum of two adjacent angles around any node is not less than π . In this paper we prove that if a canonical tree exists, then it is the shortest (degree-4) network under a given topology E . We present an O(n ² ) time algorithm for finding a degree-4 shortest network whose topology belongs to H(E) . Received November 16, 1998.