Revealing an Interconnected Interfacial Layer in Solid‐State Polymer Sodium Batteries

Replacing the commonly used nonaqueous liquid electrolytes in rechargeable sodium batteries with polymer solid electrolytes is expected to provide new opportunities to develop safer batteries with higher energy densities. However, this poses challenges related to the interface between the Na‐metal anode and polymer electrolytes. Driven by systematically investigating the interface properties, an improved interface is established between a composite Na/C metal anode and electrolyte. The observed chemical bonding between carbon matrix of anode with solid polymer electrolyte, prevents delamination, and leads to more homogeneous plating and stripping, which reduces/suppresses dendrite formation. Full solid‐state polymer Na‐metal batteries, using a high mass loaded Na₃V₂(PO₄)₃ cathode, exhibit ultrahigh capacity retention of more than 92 % after 2 000 cycles and over 80 % after 5 000 cycles, as well as the outstanding rate capability.     

Catalytic reforming of tar using corncob char and char-supported potassium catalysts

This work aims to investigate the importance of biomass char and the metal oxides in the ash in tar cracking during the volatile–char interactions. Experiments were carried out in a two-stage fixed reactor, and corncob, one typical agricultural biomass rich in potassium, was chosen as raw material. Results showed that char and char-supported potassium catalysts have good activity for tar elimination due to the good absorbability of char and catalytic property of potassium. In particular, tar conversion efficiency can reach 95.8% by using 1.5 K-char catalyst at 700 °C. The reforming reactions can be significantly enhanced during the volatile–char interactions in the presence of char and char-supported potassium catalysts. As a result, the syngas yield increased significantly with increasing temperature and supported K⁺, particularly the combustible gases including H₂, CO and CH₄. Physical and chemical structure of char changed due to reforming reactions related to the carbon, while the content of potassium was almost unchanged.     

A semismooth Newton based augmented Lagrangian method for nonsmooth optimization on matrix manifolds

Mathematical Programming - We derive new and improved non-asymptotic deviation inequalities for the sample average approximation (SAA) of an optimization problem. Our results give strong error...     

改善SBA-15介孔材料水热稳定性的简单溶剂热后处理方法

提出了一种有效改善SBA-15介孔材料水热稳定性的简单溶剂热后处理方法. SBA-15材料经环己烷、甲苯和正丁醇等有机溶剂在157和190 oC密闭容器中分别处理6–24 h后,可呈现很好的水热稳定性.它们在800 oC经100%水蒸气处理12 h,依然能保持很好的有序介孔结构,比表面积可高达192–281 m2/g.其中,经环己烷190 oC溶剂热处理24 h的样品表现出最优的水热稳定性.溶剂热处理能显著提升材料孔壁中类似Si(OSi)2(OH)2和Si(OSi)3OH结构的Si–OH基间脱水,形成稳定的Si(OSi)4结构,从而有效减少了SBA-15材料孔壁的缺陷.由此,介孔材料的水热稳定性得到明显改善.溶剂热处理对SBA-15材料水热稳定性的这种提升作用与所用溶剂性质、处理温度以及SBA-15前驱体的类型密切相关.其中,以低沸点的非极性溶剂处理焙烧后的SBA-15材料表现出最好的稳定化效果.该方法具有简单、低能耗的特点,其在制备高水热稳定的有序硅基介孔材料上有很好的潜在应用价值.     

Color ghost imaging via sparsity constraint and non-local self-similarity

We propose a color ghost imaging approach where the object is illuminated by three-color non-orthogonal random patterns. The object’s reflection/transmission information is received by only one single-pixel detector, and both the sparsity constraint and non-local self-similarity of the object are utilized in the image reconstruction process. Numerical simulation results demonstrate that the imaging quality can be obviously enhanced by ghost imaging via sparsity constraint and nonlocal self-similarity(GISCNL), compared with the reconstruction methods where only the object’s sparsity is used. Factors affecting the quality of GISCNL, such as the measurement number and the detection signal-to-noise ratio, are also studied.     

槽型宽翼受压构件剪力滞分析的传递矩阵法

利用能量变分法,建立了槽型宽翼受压构件考虑剪力滞效应时的平衡控制微分方程,给 出了该方程在轴向均布载荷作用下的初参数解,导出了求解槽型宽翼受压构件内力、应力和 位移的场矩阵和点矩阵,提出一种研究槽型宽翼受压构件剪滞效应的传递矩阵法. 数值算例 表明,该方法计算便捷、精度好、具有较高的工程应用价值.     

银纳米片在无纺布纤维上的可控组装及其SERS效应

以无纺布(NWF)为支撑基体, 采用两步化学合成法在NWF上原位构建了由间隙为20~110 nm Ag纳米片(AgNS)组装成的AgNS@NWF微纳结构. 扫描电子显微镜(SEM)分析表明, AgNS@NWF具有特殊的层级结构, 该结构可用于表面增强拉曼散射(SERS)研究. 实验结果表明, AgNS@NWF微纳结构具有良好的SERS灵敏度和优异的信号可重现性. 将罗丹明6G(R6G)作为SERS探针分子, 发现R6G的SERS特征峰强度的对数值与R6G水溶液的浓度对数值呈良好的线性关系, 最低检测限可达1×10^?10 mol/L, 表明AgNS@NWF微纳结构具有良好的SERS灵敏度; 当R6G水溶液的浓度为1×10^?5, 1×10^?6和1×10^?7 mol/L时, 610 cm^?1处谱带拉曼散射强度的相对标准偏差分别为3.57%, 3.67% 和8.46%, 优于或接近于以往研究, 表明AgNS@NWF微纳结构具有优异的信号可重现性. 将3-巯基丙酸和三聚氰胺作为SERS的检测分子, 最低检测限分别为1×10^?5和1×10^?6 mol/L. 本文为制备灵敏度高、 信号可重现性优异的SERS基底提供了一种简单、 快速、 成本低廉的方法, 在生物检测和环境监测中具有潜在的应用价值.     

流动注射氢化物发生原子荧光法测定中药中的微量As、Hg

建立了一套流动注射－氢化物发生－原子荧光测定中药样品中微量Ａｓ、Ｈｇ的方法，研究了酸度、ＮａＢＨ４浓度、载气流速等条件对检出限的影响．在优化的工作条件下，对砷、汞的检出限分别为０．１ｎｇ／ｍＬ和０．０２ｎｇ／ｍＬ．本法具有操作简便、快速，灵敏度高等优点，可用于中药样品中微量Ａｓ、Ｈｇ的测定．     

壬基酚甜菜碱两性表面活性剂的合成和抗温耐盐性能

以壬基酚、环氧氯丙烷、二甲胺和3-氯-2-羟基丙磺酸钠为原料, 在催化剂的作用下经醚化、叔胺化、季铵化, 合成了壬基酚甜菜碱两性表面活性剂(NSZ), 并确定了最佳的反应条件。 壬基酚氯醇醚的最佳合成条件:物料比n(壬基酚):n(环氧氯丙烷)=1:4, 催化剂四丁基溴化铵用量为壬基酚用量的4%(摩尔比), 反应时间为4 h, 反应温度为95 ℃。 壬基酚叔胺的最佳合成条件:物料比为n(壬基酚氯醇醚):n(二甲胺):n(氢氧化钠)=1:2.5:1.1, 反应时间为4 h, 反应温度为60 ℃。 NSZ的最佳合成条件:以异丙醇/水为溶剂且其体积比为2:1, 反应温度为85 ℃, 反应时间24 h, n(3-氯-2羟基丙磺酸钠):n(壬基酚叔胺)=1.2:1, 反应体系的pH值为8~9。 通过测定NSZ在高温高矿化度条件下的界面性能、乳化性能和热稳定性, 证明了NSZ具有良好的耐温抗盐性能。     

茶水中多元素化学形态的同时分析

本工作建立了分离和测定茶水中Ａｌ、Ｍｎ、Ｍｇ、Ｚｎ及Ｆｅ的化学形态的方法。茶水中金属元素的各化学形态经高效液相色谱分离后，用电感耦合等离子体原子发射光谱在线检测Ｍｎ、Ｍｇ、Ｚｎ、Ｆｅ，用石墨炉原子吸收非在线测定Ａｌ。结果表明，茶水中Ａｌ等金属元素一部分以无机离子形式存在，另一部分则以有机络合物形式存在。实验发现当以Ａｌ、Ｍｎ、Ｍｇ、Ｚｎ、Ｆｅ儿茶素络合物作为标准物质时，ＨＰＬＣ的保留时间恰好与茶水