钼酸根阴离子在增强聚苯胺包覆的镍钴层状氢氧化物的电容和析氧行为中的关键作用

理论容量大且过电位低的层状氢氧化物(LDHs)是极有前景的超级电容电池和析氧反应的电极材料;然而,体相LDHs的低电导率和活性位点不足增加了电极的内阻,降低了电极容量和产氧效率.本文采用两步法制备了聚苯胺包覆的MoO42?插层的镍钴层状双金属氢氧化物复合电极(M-LDH@PANI).随着LDH中MoO42?含量的增加,针状的LDH微球逐渐演化为具有较高比表面积的片状M-LDH微球,这为整个电极提供了更多的电化学位点.此外,非晶态的聚苯胺包覆提高了复合电极的电导率.在引入适量MoO42?插层离子时,M-LDH@PANI表现出显著强化的储能和催化性能.所获得的M-LDH@PANI-0.5在析氧反应中表现出优越的电催化活性(10 mA cm?2时的过电位为266 mV),作为超级电容电池电极则具有864.8 C g?1的高容量.采用M-LDH@PANI-0.5作为正极及以活性炭作为负极组装的超级电容电池在功率密度为8,300.0 W kg?1时能量密度为44.6 Wh kg?1,且具有优异的循环稳定性(10000次循环后保留83.9％的初始容量).本文为LDH基材料的阴离子插层改性增强材料性能的机理提供了一个非传统的解释.在上述研究基础上,采用射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和比表面积测试(BET)等手段对样品进行了深入表征.XRD结果表明,MoO42?插层的LDH材料的层间晶面(003)的峰随着MoO42?含量的增加而逐渐消失,这是由于晶面间距越大越容易受到晶粒细化的影响,间距大的晶格更容易受到破坏,导致晶格的展宽和弱化,从而间接证明MoO42?的成功插层.SEM、HRTEM和BET测试结果表明,MoO42?的含量对材料的形貌和比表面积具有重大影响.利用XPS对样品的价态进行了研究,发现随着MoO42?含量的增加,Co和Ni的价态没有明显变化.电化学测试结果表明,电极的储能和催化性能随MoO42?含量的增加而先增加后减小.利用理论计算分析了MoO42?在LDH中的插层行为,发现少量的MoO42?有利于扩大LDH的层间间距,而过量的MoO42?则会与LDH的H原子结合,从而与电解液中的OH?竞争,导致复合电极的电化学性能下降.此外,MoO42?插层的片状微球能有效调节材料的去质子化能,大大加速电极表面的氧化还原反应.因此,MoO42?插层能够显著强化LDH基材料的超级电容电池电极和OER催化剂电化学性能.     

Simultaneous determination of mitotane,its metabolite,and five steroid hormones in urine samples by capillary electrophoresis using β-CD2SDS1 complexes as hydrophobic compounds solubilizers

Mitotane is a cytotoxic drug used in the treatment of inoperable adrenocortical carcinoma, it inhibits steroidogenesis as well, and therefore monitoring the level of steroid hormones in patients treated with mitotane is a crucial point of therapy. Hence, we have developed a simple, fast, and efficient electrophoretic method combined with reverse polarity sweeping as online preconcentration technique and dispersive liquid–liquid microextraction for the simultaneous determination of mitotane, its main metabolite DDA, and five steroid hormones (progesterone, testosterone, epitestosterone, cortisol, and corticosterone) in urine samples. In addition, a new sample matrix consisting of β-CD₂SDS₁ complexes for a high hydrophobic compounds solubilization was developed. Approach based on the application of β-cyclodextrin and SDS complex of a ratio 2:1 allowed for hydrodynamic injection into the capillary of a solution containing both mitotane and other analytes. The detection limits of the analytes for the reverse polarity sweeping-dispersive liquid–liquid microextraction method were found to be in the range of 1.5–3 ng/mL, which were approximately 1000 times lower than in the conventional hydrodynamic injection (5 s, 0.5 psi) without any preconcentration procedure. All analytes were completely resolved in less than 13 min by uncoated silica capillary with an inner diameter of 75 μm (ID) × 60 cm. Electrophoretic separation was performed in reverse polarity with a voltage of –25 kV with a background electrolyte (BGE) consisting of 100 mM SDS, 25% ACN, 25 mM phosphate buffer (pH 2.5), and 7 mM β-cyclodextrin.     

基于纤维素的气凝胶材料

纤维素是自然界中储量最为丰富的一种天然高分子。作为继无机气凝胶和合成聚合物气凝胶之后的第三代气凝胶,纤维素基气凝胶材料兼具绿色可再生的纤维素材料和多孔气凝胶材料两者的优点,成为纤维素材料研究与应用中的一个热点。本文梳理了纤维素基气凝胶材料的发展脉络,综述了纤维素基气凝胶材料的研究进展。重点对纤维素基气凝胶的制备方法进行了总结,包括基于含水溶剂和无水溶剂的纤维素直接溶解法及源自植物纤维素和细菌纤维素的纤维素纳米纤维的水相分散法。介绍了纤维素基气凝胶力学性能的提高和功能性开发的最新研究结果。最后对纤维素基气凝胶材料的发展前景和研究方向进行了展望。     

Determination of three kinds of banned drugs in milk powder by hybrid solid‐phase extraction purification combined with gas chromatography and mass spectrometry

A gradient clean‐up method for the quantification of five kinds of banned drugs (two hormones, two sedatives, and one chloramphenicol) in milk powder was developed. We used the combination of solid‐phase extraction purification with gas chromatography and mass spectrometry. Milk powder was initially hydrolyzed by β‐glucuronidase/arylsulfatase, and then the hydrolyzed solution was concentrated and purified using a C₈ and cation resin solid‐phase extraction column. To isolate hormones and chloramphenicol drugs, products from the previous step were diluted with methanol and further purified using a silica and diatomite solid‐phase extraction column. After derivatization, the drugs were analyzed by gas chromatography with mass spectrometry, and the hydrolyzed solution was diluted with 5% ammoniated methanol to purify sedatives before gas chromatography with mass spectrometry analysis. Results showed that after adding the banned drugs at concentrations of 0.3–10.0 μg/kg, the average recovery range was 78.2–97.3% with relative standard deviations of 5.3–12.5%. The limit of quantification of the banned drugs (S/N ≥ 10) was 0.3–5.0 μg/kg, whereas the limit of detection (S/N ≥ 3) was 0.1–2.0 μg/kg. The solid‐phase extraction gradient purification system was simple, rapid, and accurate, and could satisfy the detection requirements of hormone, sedatives, and chloramphenicol drugs when used together with gas chromatography and mass spectrometry.     

自由基修饰共轭微孔聚合物应用于5-羟甲基糠醛选择性氧化

采用有机单体侧链嫁接2,2,6,6-四甲基哌啶氧自由基（2,2,6,6-tetramethylpiperidineoxyl,TEMPO）的策略将TEMPO嫁接到2,5-二溴苯甲酸侧链,并与四（4-乙炔基苯）甲烷通过Sonogashira偶联反应,构筑TEMPO自由基功能化共轭微孔聚合物CMP-4-TEMPO.利用核磁共振谱（NMR）、扫描电子显微镜（SEM）、粉末X-射线衍射（XRD）红外吸收光谱（FT-IR）和电子顺磁共振谱（EPR）等技术研究了所合成单体及CMP形貌和结构.催化性能测试结果表明CMP-4-TEMPO可将5-羟甲基糠醛（5-HMF）高效、高选择性氧化成高附加值2,5-二甲酰基呋喃（2,5-DFF）.CMP-4-TEMPO催化剂循环利用10次仍保持较高的转化率.提出了CMP-4-TEMPO中形成TEMPO氧正离子是实现5-HMF转化为2,5-DEF的催化氧化机理.CMP-4-TEMPO有望成为各种醇高效、高选择性氧化以及可循环利用的异相催化剂.     

Transparent and flame retardant cellulose/aluminum hydroxide nanocomposite aerogels

Cellulose-based nanocomposite aerogels were prepared by incorporation of aluminum hydroxide (AH) nanoparticles into cellulose gels via in-situ sol-gel synthesis and following supercritical CO₂ drying. The structure and properties of cellulose/AH nanocomposite aerogels were investigated by Fourier transform infrared spectroscopy, scanning electron microscopy, ultraviolet-visible spectrometry, N₂ adsorption, thermogravimetric analysis, and micro-scale combustion calorimetry. The results indicated that the AH nanoparticles were homogeneously distributed within matrix, and the presence of AH nanoparticles did not affect the homogeneous nanoporous structure and morphology of regenerated cellulose aerogels prepared from 1-allyl-3-methylimidazolium chloride solution. The resultant nanocomposite aerogels exhibited good transparency and excellent mechanical properties. Moreover, the incorporation of AH was found to significantly decrease the flammability of cellulose aerogels. Therefore, this work provides a facile method to prepare transparent and flame retardant cellulose-based nanocomposite aerogels, which may have great potential in the application of building materials.     

Mn(Ⅱ)/Mn(Ⅲ)电对在硫酸溶液中氧化还原行为

采用循环伏安法对Mn(Ⅱ)/Mn(Ⅲ)电对在硫酸溶液中铂电极上的氧化还原与Mn(Ⅱ)浓度、酸浓度、扫描速率、温度以及对流因素的函数关系进行了研究.结果发现,Mn(Ⅱ)在铂电极上Mn(Ⅱ)的氧化及Mn(Ⅲ)的还原均受扩散控制；升高温度和磁搅拌均能增加Mn(Ⅱ)氧化为Mn(Ⅲ)的速率；增加酸浓度和Mn(Ⅱ)浓度有利于增加Mn(Ⅲ)的稳定性,减少Mn(Ⅲ)的歧化和水解.     

Unsymmetrical N and/or O-bridged calixarene derivatives: synthesis,structure and encapsulation of solvent molecules in the solid state

Eight unsymmetrical N and/or O-bridged calixarene derivatives were obtained by 1 (naphthalene-2,7-diol), 2 (bis(4-hydroxyphenyl)methanone), 3 (4,4′-methylenedianiline), 4 (3,3′-methylenedianiline), 5 (4,4′-oxydianiline) and 6 (4,4′-(perfluoropropane-2,2-diyl)dianiline) reacting with fragment a (4,4′-bis(dichloro-s-triazinyloxy)propane-2,2-diyldibenzene) and b (N,N′-bis(dichloro-s-triazinyl)-4,4′-methylenedianiline) under very mild reaction conditions via efficient fragment coupling strategy. We also obtained the crystal structure of 1a (tetraoxocalix[2](propane-2,2-diyldibenzene,naphthalene)[2]triazine) which can form a molecular capsule by two dimers with C–H?N and C–H?O quadruple hydrogen bonds, and it has the encapsulation ability toward solvent molecules.     

氮掺杂石墨烯负载的硫化镉空心球纳米复合材料的光催化性能

通过无模板法一步合成了一种新型N掺杂石墨烯负载的CdS空心球复合材料. 采用X射线衍射、透射电镜、红外光谱、紫外-可见光谱、N₂吸附-脱附、荧光光谱和X射线光电子能谱等技术对该材料进行了表征, 并在可见光照射下测试了其在降解亚甲基蓝和水杨酸中的光催化性能. 结果表明, 相对于氧化石墨烯负载硫化镉空心球和单独的硫化镉空心球, 氮掺杂石墨烯负载的硫化镉空心球具有更高的光催化活性和稳定性. 这是由于氮掺杂的石墨烯能充当优异的电子受体和传输体, 从而抑制了载流子的复合. 另外发现, 羟基自由基是可见光下降解亚甲基蓝的主要活性物种.     

合成高密度烃类燃料研究进展

本文对合成高密度烃类燃料的进展进行了总结,分别对多环烃类燃料、高张力笼状烃类燃料和添加纳米级微粒的燃料进行了评述.以烃类物质为原料,通过聚合、加氢、异构等工艺合成的多环高密度燃料拥有较高的能量密度和较佳的稳定性能,是目前高密度燃 料的发展重点.高张力笼状烃类燃料和添加纳米级微粒的燃料拥有更大的密度(一般大于1g/ cm3)和燃烧热值,是极具发展前景的新一代燃料。