Metal/semiconductor hybrids consisting of self-assembled CdS nanoparticles on Cd nanowires

We report on the synthesis and the characterisation of metal/semiconductor hybrids consisting of self-assembled CdS nanoparticles on Cd nanowires, which are grown by thermal evaporation of the mixture of CdS and Cr. The growth of the hybrids is attributed to the decomposition of CdS at high temperature and the strain relieving that arises mainly from the lattice mismatch between Cd and CdS. Temperature dependence of zero-field resistance of single nanohybrid indicates that the as-produced Cd/CdS nanohybrid undergoes a metal--semiconductor transition as a natural consequence of hybrid from metallic Cd and semiconducting CdS. The metal/semiconductor hybrid property provides a promising basis for the development of novel nanoelectronic devices.     

Nanohole 3D-size tailoring through polystyrene bead combustion during thin film deposition

A novel approach is presented for nanohole 3D-size tailoring. The process starts with a monolayer of polystyrene (PS) beads spun coat on silicon wafer as a template. The holes can be directly prepared through combustion of PS beads by oxygen plasma during metal or oxide thin film deposition. The incoming particles are prevented from adhering on PS beads by H₂O and CO₂ generated from the combustion of the PS beads. The hole depth generally depends on the film thickness. The hole diameter can be tailored by the PS bead size, film deposition rate, and also the combustion speed of the PS beads. In this work, a series of holes with depth of 4-24 nm and diameter of 10-36 nm has been successfully prepared. The hole wall materials can be selected from metals such as Au or Pt and oxides such as SiO₂ or Al₂O₃. These templates could be suitable for the preparation and characterization of novel nanodevices based on single quantum dots or single molecules, and could be extended to the studies of a wide range of coating materials and substrates with controlled hole depth and diameters.     

Room-temperature deposition of transparent conducting Al-doped ZnO films by RF magnetron sputtering method

Transparent conductive Al-doped zinc oxide (AZO) films with highly (0 0 2)-preferred orientation were deposited on quartz substrates at room temperature by RF magnetron sputtering. Optimization of deposition parameters was based on RF power, Ar pressure in the vacuum chamber, and distance between the target and substrate. The structural, electrical, and optical properties of the AZO thin films were investigated by X-ray diffraction, Hall measurement, and optical transmission spectroscopy. The 250 nm thickness AZO films with an electrical resistivity as low as 4.62 × 10⁻⁴ Ω cm and an average optical transmission of 93.7% in the visible range were obtained at RF power of 300 W, Ar flow rate of 30 sccm, and target distance of 7 cm. The optical bandgap depends on the deposition condition, and was in the range of 3.75-3.86 eV. These results make the possibility for light emitting diodes (LEDs) and solar cells with AZO films as transparent electrodes, especially using lift-off process to achieve the transparent electrode pattern transfer.     

光致变色二芳基乙烯抗疲劳特性实验研究

提出了一种简单直观的方法研究光致变色材料二芳基乙烯/PMMA膜的抗疲劳特性.通过测量样品在漂白和呈色过程中探测光的透过率,分析该样品光致变色过程的最佳曝光量,在此基础上测量样品的抗疲劳特性.结果显示:在漂白和呈色过程中,激发红光和紫光的最佳曝光量为分别为1 900 J/cm2和600 mJ/cm2,表明该材料对红光不敏感,对紫光比较敏感.定义漂白-呈色过程中,探测光透过率稳定值差下降为第一次循环的50%时样品已经疲劳.通过交替的漂白-呈色循环,测得这种二芳基乙烯材料的擦写次数为27次.     

A generalized Kolmogorov-Sinai-like entropy under Markov shifts in symbolic dynamics

In this paper, a generalized Kolmogorov-Sinai-like entropy ( entropy) in the sense of Tsallis is proposed with a nonextensive parameter q under Markov shifts, which contains the classical Kolmogorov-Sinai (KS) entropy and the Rényi entropy as well as Bernoulli shifts as special cases. To verify the formula of this entropy, a one-dimensional iterative system is chosen as an example of Markov shifts, and its entropy is evaluated by a new refinement method of symbolic dynamics called symbolic refinement which differs from the conventional numerical method. The numerical results show that this entropy is monotonically decreasing as q increases.     

FTIR结合生理特性研究镉胁迫对果灰藓的影响

苔藓植物可作为监测环境中重金属污染的指示植物。以苔藓植物果灰藓为实验材料,用不同浓度的重金属镉处理7 d后,借助傅里叶红外光谱法(FTIR)分析重金属镉胁迫下果灰藓各化学成分的变化,同时测定可溶性糖(SS)、可溶性蛋白(Pr)、丙二醛(MDA)含量在镉胁迫下的生理指标。结果表明：随着镉处理浓度的升高,可溶性糖含量和可溶性蛋白含量呈现先上升后下降的趋势,丙二醛含量先下降后上升。FTIR与果灰藓响应重金属镉胁迫的各生理指标变化趋势较一致,且FTIR比传统的生理指标测定更敏感、便捷。因此,FTIR可以作为研究苔藓植物应用于环境重金属污染监测的一种快速、有效的方法。     

1．06μm激光大气后向散射强度仿真计算研究

针对激光大气后向散射信号对激光导引头制导性能的影响,分析了激光大气后向散射的形成,利用MATLAB语言对1．06μm激光大气后向散射信号强度进行了仿真计算,同时设计开发了一套模拟计算软件,并通过试验验证了软件计算激光大气后向散射信号强度的准确性。     

小型风光互补发电演示装置

研制了适用于大学物理演示实验教学的小型风光互补发电演示装置,该装置由叶片、风力发电机、光伏太阳能电池板、控制器、蓄电池、逆变器、负载等几部分组成.整个系统以光电互补控制器为核心,经由风力发电机与光伏太阳能电池板将风能和太阳光能转变为电能,并将其储存于蓄电池中供负载使用.该装置展示了风力发电系统的组成,演示了风力发电原理和相关空气动力学原理.     

长亚甲基链段改性固化剂的制备与性能

采用二官能度环氧树脂对己二胺进行改性,得到了含多段长亚甲基链段的柔性固化剂。利用红外光谱表征其基本结构。采用环氧树脂E-44与之进行固化,通过不同温度下固化时间对力学强度影响的分析,初步确定其最佳固化条件为80 ℃,6 h。通过热重分析检测不同固化比例下固化产物的热稳定性,并采用差示扫描量热法研究该固化剂的固化动力学参数、反应活性、最佳固化温度及时间。对其固化物拉伸剪切强度进行测试,测试结果表明：在固化比例为1:0.5时,在-196 ℃、室温、60 ℃下的拉伸剪切强度分别为16.84,14.73和13.52 MPa,基本满足实际应用的需求。     

0.4 THz回旋行波管的设计与模拟

利用三维粒子模拟仿真软件,对共焦波导结构的0.4 THz回旋行波管进行了注波互作用的模拟研究。以共焦波导的冷腔色散以及衍射损耗入手,最终选定HE06模作为互作用工作模式。为了对寄生振荡进行抑制,在互作用结构中引入了截断。在模拟过程中,通过调节束压、束流、工作磁场、电子束横纵速度比,得到了最优的工作参数。最终,在束压34 kV、磁场14.25、束流2 A、横纵速度比0.75的工作参数下,当输入信号为1 W时,得到了最高2.76 kW的功率输出,增益超过34 dB,3 dB带宽为8 GHz,效率达到4%。