Water as an Efficient Solvent for Oxygenation Transformations with 34% Hydrogen Peroxide Catalyzed by some Heteropolyoxometalates

Summary. A highly efficient, selective, fast, and cheap protocol is developed for oxidation of aromatic amines and alcohols utilizing 34% hydrogen peroxide in water catalyzed by some W- and Mo-based heteropolyoxometalates. Findings showed that dodecatungstophosphoric acid, H₃PW₁₂O₄₀, was the most efficient catalyst in the examined oxidation reactions. This methodology may prove to be a valuable alternative for eco-friendly green oxidation. Inherent simplicity, easy work up, and using regenerable catalysts were other key aspects of this oxidation protocol.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

On the existence of MOLS with equal-sized holes

We consider a pair of MOLS (mutually orthogonal Latin squares) having holes, corresponding to missing sub-MOLS, which are disjoint and spanning It is shown that a pair of MOLS withn holes of sizeh exist forh 2 if and only ifn 4 For SOLS (self-orthogonal Latin squares) with holes, we have the same result, with two possible exceptions SOLS with 7 or 13 holes of size 6     

Structural study of 12 MeV electron irradiated polypropylene by X-ray diffraction

12 MeV electron beams with different doses of 4, 8, 16 and 32 Mrad from LINAC designed by Nanjing University have been used to irradiate polypropylene films and their structures studied by X-ray diffraction afterwards. We have found that the electron irradiation does not change the total crystallinity of polypropylene but greatly inflences its crystal structure with increase of phase and decrease of phase as irradiation dose increases (within 16 Mrad). However, it is unexpected that the structure of irradiated sample with 32 Mrad are similar to that of the control sample. This behavior has also been observed in positron annihilation lifetime measurements.     

液晶的激光拉曼光谱研究——Ⅰ.十九种液晶的固相激光拉曼光谱

本文报道联苯、联苯酯、单酯、双酯、Schiff碱和氧化偶氮苯型十九种液晶化合物的固相激光拉曼光谱,讨论了2300～400 cm~(-1)范围内基团的特征谱带归属以及光谱与结构之间的关系.     

A new C21-steroidal glycoside from Cynanchum stauntonii

A new C21-steroidal glycoside with two known compounds were isolated from the root of Cynanchum Stauntonii.Based on thespectral analysis,including MS,1H NMR,13C NMR,DEPT,1H-1H COSY,13C-1H COSY,HMQC and HMBC,their chemicalstructures were determinated as glaucogenin-C 3-O-a-L-cymaropyranosyl-(1→4)-b-D-digitoxopyranosyl-(1→4)-β-D-canaropyranoside(1),stigmasterol(2)and ursolic acid(3).