具有性质(G'_k)的Wakamatsu倾斜模

本文引进了具有性质(G'k)的Wakamatsu倾斜模的概念,并用同调有限子范畴的性质对其进行了刻画．     

Absorption Complex between Porphyrin and Phenothiazine in Reverse Micelles

Porphyrin derivatives attract much more interest in photodynamic therapy (PDT). Their importance as therapeutic drugs and targeting agents has been widely recognized1, and many of the efforts have been put towards crafting new porphyrin-based molecular entities to achieve enhanced tumor localization, better tissue penetration and increased singlet oxygen quantum yield2. The states of porphyrins in tissue models such as micelles, lipid bilayers are extensively investigated focusing more or l…     

LaB6在低压强氮气和氦气中的放电特性

 研究了LaB₆在1~10 Pa氮气和氦气中的直流和脉冲放电特性以及放电过程对电极的影响。结果表明，电极直径为5 mm的LaB6氦气放电管在脉冲工作状态下可以长期稳定放电。在脉冲电压为2.2 kV、脉冲宽度10 ms、频率13.3 Hz下，脉冲峰值放电电流超过120 A。氦气放电管在放电过程中，阴极表面有离子的清洗和活化作用，可以使电极的表面逸出功降低，提高放电管的发射能力和稳定性。LaB₆作为气体放电电极具有寿命长、延迟时间短、放电电流大等优点，可用于重复强流脉冲气体放电的高压高速开关器件。     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

The Totally Geodesic Coisotropic Submanifolds in Kähler Manifolds

In this paper, we consider the coisotropic submanifolds in a Kähler manifold of nonnegative holomorphic curvature. We prove an intersection theorem for compact totally geodesic coisotropic submanifolds and discuss some topological obstructions for the existence of such submanifolds. Our results apply to Lagrangian submanifolds and real hypersurfaces since the class of coisotropic submanifolds includes them. As an application, we give a fixed-point theorem for compact Kähler manifolds with positive holomorphic curvature. Also, our results can be further extended to nearly Kähler manifolds.     

激光穿透焊的三维数值模拟

本文对激光穿透焊进行了三维数值模拟，除考虑焊接速度影响外，还研究了Ｍａｒａｎｇｏｎｉ对流对熔池流动与传热的影响。将三维数值模拟结果与相应的二维模拟结果进行了比较，结果表明，Ｍａｒａｎｇｏｎｉ对流对熔池的形成有很大的影响，因此不可忽略。本文还给出了估计激光穿透焊中蒸气孔尺寸与焊接热效率的方法。     

Microstructure of a-SiOx:H

A set of a-SiO_x:H (0.52 <x< 1.58) films are fabricated by plasma-enhanced-chemical-vapor-deposition (PECVD) method at the substrate temperature of 250°C. The microstructure and local bonding configurations of the films are investigated in detail using micro-Raman scattering, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). It is found that the films are structural inhomogeneous, with five phases of Si, Si₂O:H, SiO:H, Si₂O₃:H and SiO₂ that coexist. The phase of Si is composed of nonhydrogenated amorphous silicon (a-Si) clusters that are spatially isolated. The average size of the clusters decreases with the increasing oxygen concentration x in the films. The results indicate that the structure of the present films can be described by a multi-shell model, which suggests that a-Si cluster is surrounded in turn by the subshells of Si₂O:H, SiO:H, Si₂O₃:H, and SiO₂.     

Phonon–replica transitions in InGaN/GaN quantum well structures

A side-bump feature in a photoluminescence (PL) spectrum of an InGaN compound was widely observed. With reasonable fitting to PL spectra with three Gaussian distributions, the temperature variations of the peak positions, integrated PL intensities, and peak widths of the main and first side peaks of three InGaN/GaN multiple quantum well samples with different nominal indium contents are shown and interpreted. The existence of the side peaks is attributed to phonon–replica transitions. The variations of the peak position separations and the decreasing trends of the first side peak widths beyond certain temperatures in those samples were explained with the requirement of phonon momentum condition for phonon–replica transitions. In the sample with 25% nominal indium content, the phonon–replica transition could become stronger than the direct transition of localized states.     

枸橼酸莫沙必利的合成

分别以邻羟基对氨基苯甲醇钠，对氟苯甲醛，邻苯二甲酰亚胺为起始原料，制得3个中间体，用其中2个中间体经偶合，环化后与第3个中间体反应，再经成盐制得产品，其摩尔总收率为31．5％。     

Effects of Au coating on thermal stresses in stainless-to-Kovar packages

A finite-element method (FEM) analysis has been carried out on the thermally-induced stresses generated when stainless steel covers are laser-welded to Au-coated Kovar TO headers during the packaging of semiconductor lasers. In particular, the effect of varying the Au coating thickness of these stresses was investigated. Maximum stresses were found to be reduced as the Au thickness increased. This effect is attributed to the reduction in thermal gradient in the weld region provided by the increased thermal conduction of thicker Au. The result suggests that adequate Au coating thickness is important for ensuring good reliability of opto-electronic packages having laser-welded caps. This revised version was published online in June 2006 with corrections to the Cover Date.