微通道板真空体电阻与Ⅱ代倒象微光管匹配关系的研究

国内研制的20/30Ⅱ代倒象微光管经常出现微通道板真空体电阻偏高或偏低的问题,直接影响Ⅱ代倒象微光管荧光屏的亮度和目标分辨力,严重影响微光管的质量。经过对20/30Ⅱ代倒象微光管的研制和理论分析,证明英国马拉德公司对用于××1383Ⅱ代倒象微光管的H36微通道板技术条件中真空体电阻技术指标的规定也存在一定的问题。本文从目前国内外工艺水平和有关文献资料的分析出发,进行专题研究。本文中所推导的计算公式和对文献资料提供的技术数据的推导分析,同样适用于其他型号微通道板的真空体电阻与相应Ⅱ代、Ⅲ代微光管匹配关系的计算与研究。     

分离流动的脉冲热线测量方法研究与应用

1引言分离流动经常出现在许多实际流动中，对流体机械和飞行器产生重大影响。但由于这种流动具有方向性，变化快，给测量带来了困难。到目前为止，主要有以下三种测量方法：山激光多普勒测速治（＊D川；（2）飞行热线（F坊In含＊。卜w让e）；O）脉冲热线技术（PulsedAVire。‘脉冲热线”比“激光多普勒测速仪”价格低一个数量级，操作简单，是一种比较理想的测量技术。其原理最初由Baner山提出，随后经过BradburyP］，Eaton问，Castro＊和Fernholz问等人不断发展与完善，目前国外正推广应用在分离流动的研究中。但在国内，尚不多见其…     

用激光散斑场检测药液内杂质含量分布

本文分析了利用散斑斑纹检测大输液药品杂质含量的机理，报道了检测大输液药品杂质的实例．     

用于留数算术中的数值／留数／数值的转换

介绍用光学方法完成留数算术中的数值/留数/数值的转换,并附有实验结果。     

正交小波包的构造

本文给出尺度因子ａ＝４时正交小波包的构造，推广了［２，４］引入的正交小波包，并给出相应的分解与再构造算法．本文引入的正交小波包具有保持信号ｆ∈Ｌ^２的线性相位，也讨论了尺度因子ａ＝ｋ（ｋ∈Ｚ，ｋ≥２）正交小波的构造     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Trefftz,collocation, and other boundary methods—A comparison

In this article we survey the Trefftz method (TM), the collocation method (CM), and the collocation Trefftz method (CTM). We also review the coupling techniques for the interzonal conditions, which include the indirect Trefftz method, the original Trefftz method, the penalty plus hybrid Trefftz method, and the direct Trefftz method. Other boundary methods are also briefly described. Key issues in these algorithms, including the error analysis, are addressed. New numerical results are reported. Comparisons among TMs and other numerical methods are made. It is concluded that the CTM is the simplest algorithm and provides the most accurate solution with the best numerical stability. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

General Information

In this paper, we propose and analyze an SQP-type method for solving linearly constrained convex minimization problems where the objective functions are too complex to be evaluated exactly. Some basic results for global convergence and local superlinear convergence are obtained according to the properties of the approximation sequence. We illustrate the applicability of our approach by proposing a new method for solving two-stage stochastic programs with fixed recourse.     

关于可达矩阵的求法探讨

在《离散数学》、《图论》课程中 ,用矩阵表示图时 ,涉及到一类重要的矩阵——可达矩阵 ,它是判别图中任意两点是否有通路的重要手段 ,也是求强分图的重要方法 ,但是可达矩阵的求法比较复杂 .本文针对这一问题 ,对可达矩阵的求法进行了改进 ,提出了一种简单可行的算法 .