离子色谱法测定甲醇和噻吩中硫、氯含量

建立了测定工业用甲醇和噻吩中硫、氯含量的离子色谱检测方法。样品经(700±25)℃灼烧后,残留物用蒸馏水洗涤,利用离子色谱仪进行分析。甲醇和噻吩中硫、氯检测结果的相对标准偏差为1.04%~1.26%,加标回收率为99.2%~101.2%。该方法操作简单,精密度和准确度高,可用于大部分可燃性有机化合物中硫、氯含量的检测。     

Facile Fabrication of Zirconia Modified Screen‐Printed Carbon Electrodes for Electrochemical Sensing of Phosphate

We report here a facile method to immobilize zirconia nanoparticles on a disposable screen‐printed carbon electrode (designated as ZrO₂‐SPCE) for phosphate sensor application. Simply by ultrasonicating a bare SPCE in a ZrO₂ slurry, ZrO₂ nanoparticles can be immobilized effectively on the electrode surface as verified by surface characterization evidences. Using ferricyanide as a redox probe, an increase in the charge transfer resistance (R_ct) of ferricyanide upon adsorption of phosphate on ZrO₂ is used for the determination of phosphate. This ZrO₂‐SPCE phosphate sensor shows a wide linear range up to 1 mM and a detection limit of 1.69 µM (S/N=3). Practical applicability of the ZrO₂‐SPCE is demonstrated by detecting phosphate content in human blood samples.     

Influence of insertion of a noble gas atom on halogen bonding in H2O···XCCNgF and H3N···XCCNgF (X = Cl and Br; Ng = Ar, Kr, and Xe) complexes

The H₂O···XCCNgF and H₃N···XCCNgF (X = Cl and Br; Ng = Ar, Kr, and Xe) complexes have been studied with quantum chemical calculations at the MP2/aug-cc-pVTZ level. The results show that the inserted noble gas atom has an enhancing effect on the strength of halogen bond, and this enhancement is weakened with the increase of noble gas atomic number. The methyl and Li substituents in the electron donor strengthen the halogen bond. The interaction energy increases from ?3.75 kcal/mol in H₃N–BrCCF complex to ?9.66 kcal/mol in H₂LiN–BrCCArF complex. These complexes have been analyzed with atoms in molecules, natural bond orbital, molecular electrostatic potentials, and energy decomposition calculations.     

Conventional strain energies of 1,2-dihydroazete, 2,3-dihydroazete, 1,2-dihydrophosphete, and 2,3-dihydrophosphete

The conventional strain energies of 1,2-dihydroazete, 2,3-dihydroazete, 1,2-dihydrophosphete, and 2,3-dihydrophosphete are determined within the isodesmic, homodesmotic, and hyperhomodesmotic models. Optimum equilibrium geometries, harmonic vibrational frequencies, and corresponding electronic energies and zero-point vibrational energies are computed for all pertinent molecular systems using SCF theory, second-order perturbation theory, and density functional theory and employing the correlation consistent basis sets cc-pVDZ, cc-pVTZ, and cc-pVQZ. Single-point fourth-order perturbation theory, CCSD, and CCSD(T) calculations employing the cc-pVTZ and the cc-pVQZ basis sets are computed using the MP2/cc-pVTZ and MP2/cc-pVQZ optimized geometries, respectfully, to ascertain the contribution of higher order correlation. Three DFT functionals, B3LYP, wB97XD, and M06-2X, are employed to determine whether they can yield results similar to those obtained at the CCSD(T) level.     

Simultaneous quantitation of seven alkaloids in processed Fuzi decoction by rapid resolution liquid chromatography coupled with tandem mass spectrometry

A rapid analytical method based on rapid resolution LC coupled with MS/MS was first established to quantify seven alkaloids in processed Fuzi decoction. The chromatographic method was optimized to allow simultaneous analysis of all analytes in 5 min and demonstrated good linearity (r > 0.9995), repeatability (RSD < 4.36%), intra‐ and interday precisions (RSD < 5.07%) with good accuracies (97.76–105.08%) and good recovery (95.0–107.5%) of seven alkaloids, namely higenamine, benzoylhypaconine, benzoylmesaconine, benzoylaconine, aconitine, hypaconitine, and mesaconitine. The LODs for these markers were in the range of 2.30–17.00 pg/mL. Quantitative analysis of the seven alkaloids in Baifupian decoction and Heishunpian decoction showed that the content of the seven marker chemicals varied significantly and concluded that the quality of Fuzi was greatly affected by different processed methods. The developed method could be used as a rapid, sensitive, and reliable approach for assessment of the quality of processed Fuzi and related decoction.     

Electropolymerization of single‐walled carbon nanotubes composited with polypyrrole as a solid‐phase microextraction fiber for the detection of acrylamide in food samples using GC with electron‐capture detection

We developed a solid‐phase microextraction coupled to GC with electron‐capture detection method for the detection of acrylamide in food samples. Single‐walled carbon nanotubes and polypyrrole were electropolymerized onto a stainless‐steel wire as a coating, which possessed a homogeneous, porous, and wrinkled surface, chemical and mechanical stability, long lifespan (over 300 extractions), and good extraction efficiency for acrylamide. The linearity range between the signal intensity and the acrylamide concentration was found to be in the range 0.001–1 μg/mL, and the coefficient of determination was 0.9985. The LOD, defined as three times the baseline noise, was 0.26 ng/mL. The reproducibility for each single fiber (n = 6) and the fiber‐to‐fiber (n = 5) repeatability prepared in the same batch were less than 4.1 and 11.2%, respectively.     

An interesting two‐phase solvent system and its use in preparative isolation of aconitines from aconite roots by counter‐current chromatography

Two‐phase solvent system plays crucial role in successful separation of organic compounds using counter‐current chromatography (CCC). An interesting two‐phase solvent system, composed of chloroform/ethyl acetate/methanol/water, is reported here, in which both phases contain sufficient organic solvents to balance their dissolving capacities. Adjusting the solvent system to get satisfactory partition coefficients (K values) for target compounds becomes relatively simple. This solvent system succeeded in sample preparation of aconitine (8.07 mg, 93.69%), hypaconitine (7.74 mg, 93.17%), mesaconitine (1.95 mg, 94.52%) from raw aconite roots (102.24 mg, crude extract), benzoylmesaconine (34.79 mg, 98.67%) from processed aconite roots (400.01 mg, crude extract), and yunaconitine (253.59 mg, 98.65%) from a crude extract of Aconitum forrestii (326.69 mg, crude extract).     

A rapid and convenient method for preparative separation of three indissolvable polyphenols from Euphorbia pekinensis by the flexible application of solvent extraction combined with counter‐current chromatography

A rapid and convenient method was established to preparatively isolate the three ellagic acid types of compounds, which were the main polyphenols in Euphorbia pekinensis, by flexibly applying solvent extraction combined with counter‐current chromatography (CCC). The total extract (extracted using 95% ethanol) of E. pekinensis was pretreated by two simple steps before CCC isolation, following the procedure: the total extract was extracted by classical solvent extraction using petroleum ether and ethyl acetate, respectively, and then the ethyl acetate extract was suspended using 95% ethanol, after being allowed to stand overnight, the sediment was obtained. Partial sediment (100 mg) was then directly separated by CCC with a two‐phase solvent system composed of chloroform‐95% ethanol‐water‐85% formic acid (50:50:50:5, v/v/v/v). About 22 mg of 3,3′‐dimethoxy ellagic acid (1), 12 mg of 3,3′‐di‐O‐methyl‐4‐O‐(β‐d ‐xylopyranosyl)ellagic acid (2), and 35 mg of ellagic acid (3) with purities of 96.0, 95.2, and 95.4% were obtained respectively in one step within 4 h. After being purified by washing with methanol, the purities of the three compounds obtained were all above 98%. The purities were determined by HPLC and their chemical structures were further identified by ¹H and ¹³C NMR spectroscopy. The recoveries were calculated as 84.6, 85.7, and 89.5%, respectively. The result demonstrated that the present isolation method was rapid, economical and efficient for the preparative separation of polyphenols from E. pekinensis.     

Evaluation of the combinative application of SDS and sodium deoxycholate to the LC–MS‐based shotgun analysis of membrane proteomes

SDS and sodium deoxycholate (SDC) as two representative detergents have been widely used in LC–MS/MS‐based shotgun analysis of membrane proteomes. However, some inherent disadvantages limit their applications such as interference with MS analysis or their weak ability to disrupt membranes. To address this, the combinative application of SDS and SDC was developed and evaluated in our study, which comprehensively used the strong ability of SDS to lyse membranes and solubilize hydrophobic membrane proteins, and the high efficiencies of an optimized acetone precipitation method and SDC in sample clean‐up, protein recovery, and redissolution and digestion of precipitated proteins. The comparative study using a rat‐liver‐membrane‐enriched sample showed that, compared with other three commonly used methods including the filter‐aided sample preparation strategy, the combinative method not only increased the identified number of total proteins, membrane proteins, and integral membrane proteins by an average of 19.8, 23.9, and 24.8%, respectively, but also led to the identification of the highest number of matching peptides. All these results demonstrate that the method yielded better recovery and reliability in the identification of the proteins especially highly hydrophobic integral membrane proteins than the other three methods, and thereby has more potential in shotgun membrane proteomics.