Determination of Tributyltin in Sea Water by Hydride Generation-Atomic Absorption Spectrometry

A hydride generation-atomic absorption spectrometry (HG-AAS) procedure is described for the analysis of tributyltin (TBT) in sea water. TBT is first converted to its volatile hydride form by reaction with sodium borohydride, followed by cryogenic trapping at ?196°C, and finally detection by atomic absorption spectrometry using an electrically heated quartz atomization cell. The linear range of calibration is 5-250 ng TBT (as tin). At the 5-ng level, the relative standard deviation (RSD) is 13%. The absolute detection limit (3σ) is 1.8 ng. Based on a sample volume of 500 mL, this value corresponds to a concentration detection limit 3.6 ng L^?1 TBT This method has been successfully applied to the analysis of TBT in sea water collected from Keelung and Kaohsiung harbors.     

Structural analysis of the reconstructed Si(001)-C surface

The atomic structure of reconstructed Si(001)c(4 x 4)-C surface has been studied by coaxial impact collision ion scattering spectroscopy. When the 100L of ethylene (C(2)H(4)) molecules have been exposed on Si(001)-(2 x 1) surface at 700 degrees C, it is found that C atoms cause the ordering of missing Si dimer defects and occupy the fourth layer of Si(001) directly below the bridge site. Our results provide the support for the previous model in which a missing dimer structure is accompanied by C incorporation into the subsurface.     

Gas-phase identity nucleophilic substitution reactions of cyclopropenyl halides

The gas-phase identity nucleophilic substitution reactions of halide anions (X = F, Cl, and Br) with cyclopropenyl halides, X(-) + (CH)(3)X <= => X(CH)(3) + X(-), are investigated theoretically at four levels of theory, B3LYP/6-311+G**, MP2/6-311+G**, G2(+)MP2//MP2/6-311+G**, and G2(+)//MP2/6-311+G**. Four types of reaction paths, the sigma-attack S(N)2, pi-attack S(N)2'-syn, and S(N)2'-anti and sigmatropic 1,2-shift, are possible for all the halides. In the fluoride anion reactions, two types of stable adducts, syn- and anti-1,2-difluorocyclopropyl anions, can exist on the triple-well-type potential energy surface of the identity substitution reactions with rearrangement of double bond (C=C), S(N)2'-syn, and S(N)2'-anti processes. The TSs for the sigma-attack S(N)2 paths have "open" (loose) structures so that the ring positive charges are high rendering strong aromatic cyclopropenyl (delocalized) cation-like character. In contrast, in the pi-attack S(N)2' paths, a lone pair is formed at the unsubstituted carbon (C3), which stabilizes the 1,2-dihalocyclopropyl (delocalized) anion-like TS by two strong n(C)-sigma*(C-F) vicinal charge-transfer delocalization interactions. The barrier height increases in the order S(N)2'-anti < sigma-attack S(N)2 < S(N)2'-syn for X = Cl and Br, whereas for X = F the order is changed to S(N)2'-anti < S(N)2'-syn < sigma-attack S(N)2 due to the stable difluoro adduct formation. The sigmatropic 1,2-shift (circumambulatory) reactions have high activation barriers and cannot interfere with the substitution reactions.     

Determination of food colorants by microemulsion electrokinetic chromatography

A microemulsion electrokinetic chromatography (MEEKC) method was developed to analyze and detect eight food colorants (tartrazine, fast green FCF, brilliant blue FCF, allura red AC, indigo carmine, sunset yellow FCF, new coccine, and carminic acid), which are commonly used as food additives in various food products. The effects of sodium dodecyl sulfate (SDS) surfactant, organic modifier, cosurfactant, and oil were examined in order to optimize the separation. The amount of organic modifier (acetonitrile) and SDS surfactant were determined as apparent influences on the separation resolution while the type of oil and cosurfactant rarely affected the separation selectivity of the eight colorants. A highly efficient MEEKC separation method, where the eight colorants were separated with baseline resolution within 14 min, was achieved by using a microemulsion solution of pH 2.0 containing 3.31% SDS, 0.81% octane, 6.61% 1-butanol, and 10% acetonitrile. This optimal MEEKC method has a higher separation efficiency and similar detection limit when compared to conventional capillary electrophoresis (CE) method. Furthermore, a sample pretreatment is rarely needed when this MEEKC technique is used to analyze colorants in food products, whereas a suitable sample pretreatment (for example solid-phase extraction) has to be employed prior to CE separation in order to eliminate matrix interferences resulting from the constituents of the food sample.     

Crosslinked liquid crystal polymers from liquid crystal monomers: Synthesis and mechanical properties

Difunctional acrylates and methacrylate monomers have been made which are high order smectic liquid crystal (or crystalline) at room temperature. This report discusses materials with the following structure: F–S–M–S–F, where F is a functional group, acrylate or methacrylate (A or M); S is a spacer (CH₂)_n(n), and M is a mesogen—in this case 4,4′-dioxybiphenyl (B). They are codified as BnA or BnM where n is the number of methylenes in the spacer. High conversion with high T_g can be obtained when polymerizing in the smectic state because the reactive end groups are concentrated in a small volume and can react well with little or no diffusion. B2A, B3A, B6A, B11A, and B3M were polymerized in the smectic state and compared to polymers made at temperatures where the monomers were isotropic. High conversion was obtained below final T_g—even then, probably because the polymers were ordered. All the polymers were studied by WAXD and dynamic mechanical spectroscopy. Solid-state NMR on B3A showed that there was very high conversion of the double bonds at all temperatures. B3A photopolymerized in the smectic state (60–76°C) produced a crystalline polymer with T_g = 185°C (1 Hz). When photopolymerized at 85°C, above the isotropization temperature (T_i), a poorly organized polymer was obtained with a T_g of 155°C (1 Hz). Monomers with an odd number of methylene groups as spacers were crystalline after polymerization. With an even number of methylene groups, they lost most of their crystallinity on polymerization below T_i, but retained a low order smectic structure. Similar structures were obtained with all the monomers when they were polymerized above T_i. There was little effect of polymerization temperature on T_g when the spacers had an even number of methylene groups. © 1993 John Wiley & Sons, Inc.     

Analysis of baclofen by capillary electrophoresis with laser-induced fluorescence detection

A new analytical method for baclofen (4-amino-3-p-chlorophenylbutyric acid) based on capillary electrophoretic separation and laser-induced fluorescence detection has been developed. Naphthalene-2,3-dicarboxaldehyde was used for precolumn derivatization of the non-fluorescent drug. Optimal separation and detection were obtained with an electrophoretic buffer of 50 mM sodium borate (pH 9.5) and a He-Cd laser (excitation at 442 nm, emission at 500 nm). Linearity (r > or = 0.99) over three orders of magnitude was generally obtained and the concentration limit of detection was in the nanomolar level. Coupled with a simple cleanup procedure, the method was successfully applied to the analysis of baclofen in human plasma. Recovery of spiked baclofen in plasma was 98%. The relative standard deviation values on peak size and migration time were 7.9% and 0.4%, respectively. The limit of detection of baclofen in plasma was 10 ng/ml.     

Catalytic Hydrolysis of Phosphate Diesters by Lanthanide(III) Cryptate (2.2.1) Complexes

Lanthanide(III) Cryptate (2.2.1) chlorides (Ln(2.2.1)Cl(3); Ln = La (1a), Ce(1b), and Eu(1c); (2.2.1) = 4,7,13,16,21-pentaoxa-1,10-diazabicyclo[8.8.5]tricosane) are effective for the catalytic hydrolysis of bis(4-nitrophenyl) phosphate. Kinetic studies reveal that the europium(III) complex (1c) catalyzes the hydrolysis to produce 6 equiv of 4-nitrophenol with a significant rate (k(1) = 1.5 x 10(-)(4) s(-)(1) at 0.40 mM) at pH 8.5 and 50 degrees C. The catalytic activity of the complexes is increased with decreasing the ionic size, i.e, La < Ce < Eu. While the use of hydrogen peroxide further increase the activity of 1b (k(1) = 1.6 x 10(-)(3) s(-)(1) at 0.40 mM), the presence of molecular oxygen does not affect the activity at all. Crystal of 1a.CH(3)OH([La(2.2.1)(Cl)(2)](Cl)(CH(3)OH)) belongs to the space group Pnma with a = 17.072(3) ?, b = 19.037(3) ?, c = 14.725(2) ?, V = 4786(1) ?(3), Z = 8, D(x)() = 1.691 g cm(-)(3), &mgr; = 21.7 cm(-)(1). The encryptated metal ion is nine-coordinated, and all the heteroatoms of the cryptate (2.2.1) ligand coordinate the metal center to form a bowl-shaped structure. Two coordinating chloride anions are located on the open face with a cis geometry. The existence of coordinated water to the europium(III) complex 1c in the aqueous solution was confirmed by time-resolved Eu(III) luminescence spectroscopy. From the decay constants in H(2)O and D(2)O, the numbers of coordinated water molecules (q) are found to be 3.02 at pH of 5.0. The above kinetic and spectroscopic observation are supportive of mechanisms in which the metal complexes act as a center for binding and activation as well as a source of nucleophilic metal hydroxides.     

Highly Enhanced Fluorescence of Supramolecular Polymers Based on a Cyanostilbene Derivative and Cucurbit[8]uril in Aqueous Solution

Supramolecular polymers (SPs) have received great attention because of their potential for various practical applications. As part of our search for SPs that are highly fluorescent in aqueous media, we designed a system based on a cucurbit[8]uril (CB[8]) host and a newly designed cyanostilbene guest. Fluorescence quantum yields of ≈0 % in the disassembled monomer state and 91 % in the CB[8]‐induced SP state were obtained. The intriguing photophysical properties of the SP are elucidated through detailed experimental and computational analysis, paving the way towards a fascinating class of water‐soluble fluorescent SPs.     

Release characteristics of the non-toxic insect repellant 2-undecanone from its crystalline inclusion compound with α-cyclodextrin

2-Undecanone (methyl nonyl ketone), a natural non-toxic insect repellant compound, was recently isolated from the trichomes of wild tomatoes, and is currently being introduced as a replacement for insect repellants containing N,N-diethyl-meta-toluamide or DEET, which are permitted for use on children older than 2 months. In an effort to improve the delivery of the somewhat volatile 2-undecanone, we have successfully formed the crystalline inclusion compound (IC) between 2-undecanone and α-cyclodextrin (α-CD), using a coprecipitation method. Employing WAXD, DSC, FT-IR, and NMR observations, we have confirmed that 2-undecanone is included as a guest inside the host α-CD cavities, and forms a channel-type crystalline IC. The release characteristics of 2-undecanone insect repellant from its α-CD-IC were studied using TGA either at a heating rate of 20 °C/min in nitrogen, and air atmospheres or at constant temperatures of 25, and 40 °C over a period of 24 h. The release/loss of 2-undecanone insect repellant from its α-CD-IC was ~60% after 24 h at 40 °C. By comparison, ~97% of pure 2-undecanone was volatilized, and lost over 24 h at 40 °C. In addition, insecticidal activity of 2-undecaonone from its α-CD complex against German cockroaches was evaluated. The results show an excellent repellency that 100% of the cockroaches were repelled for the first 2 days after application. These results suggest that the gradual, long-term delivery of the insect repellant 2-undecanone can be significantly improved through employment of its crystalline α-CD-IC.