High uniform illumination of light-emitting diodes lighting with applying the multiple-curvature lens

Light-emitting-diode (LED) sources will play a very important role in the future. Nowadays, there are many traditional light sources gradually being replaced by LED sources. From the viewpoint of illumination, different environments have the same requirement uniformity of illumination. The basic reason for this is to insure human comfort. Therefore, the promotion of illumination uniformity is an especially important key issue. In this article, we propose one effective design to improve the uniformity of illumination of LEDs with Lambertian radiation profiles by inserting into the lighting system, multiple-curvature lens. The enhanced illumination uniformity of LEDs, in this system, is due to energy redistribution by controlling the direction of incident light, using geometrical optics theory. Ray tracing was applied for the simulations required. Finally, the uniformity of illumination is 76.17% in LEDs using multiple-curvature lens, which is twice the uniformity of conventional LEDs. Furthermore, the phenomenon of overload in the multiple-curvature lens is reduced by increasing the numbers of rings on the lens. The overload is less than 0.02 lm in the case of lens designed with 23 rings.     

Fabrication and characterization of poly(methyl methacrylate) photopolymer doped with 9,10-phenanthrenequinone (PQ) based derivatives for volume holographic data storage

We present our studies on the photopolymer of poly(methyl methacrylate) (PMMA) doped with 9,10-phenanthrenequinone based derivatives for volume holographic storage. By introducing different functional groups on the side-chain of 9,10-phenanthrenequinone molecule, the holographic characteristics of the material can be modified. The photoreaction involved with the holographic recording in the samples was investigated by measuring UV-Vis absorption spectrum and mass spectrum. The experimental results show that the similar behaviors were exhibited in these photopolymers. It is found that phase hologram recording in our PQ derivatives doped PMMA photopolymer involves a structure change of the quinone based molecule, which induces a strong change of the refractive index. Experimental characterizations on holographic data storage, including material sensitivity, dynamic range (M#) and bit-error-rate have been performed. We found that, by selecting appropriate functional groups, an improvement in sensitivity and M# for holographic data storage can be achieved.     

Interface study of ion irradiated Cu/Ni/Cu(0 0 2)/Si magnetic thin film by X-ray reflectivity

The irradiation effect of 1 MeV C⁺ on the interface and magnetic anisotropy of epitaxial Cu/Ni system with a perpendicular magnetic anisotropy was investigated by using magneto-optical Kerr effects, grazing incident diffraction and X-ray reflectivity. The magnetic easy-axis was altered from the direction along the surface normal to in-plane and the strain in the Ni layer was relaxed after ion irradiation. Though the interface between the top Cu layer and the Ni layer becomes rough, the contrast of electron densities of Cu and Ni layer increases and the grain-growth occurs during ion irradiation. These phenomena arise from thermo-chemical driving force, i.e. heat of formation, which may be a crucial factor in determining the interface shape in the case of indirect energy transfer mechanism. Therefore, the change of the magnetic anisotropy of the Ni/Cu system after ion irradiation is not due to the formation of the intermixed layer at the interface. The ion irradiation effects on the grain-growth and enhancement of the electronic contrast between Ni and Cu are explained by the interfacial atomic movement caused by thermo-chemical driving force.     

Calculating specific absorbed fractions with standard Korean male adults

Based on data representing standard Korean male adults, a mathematical anthropomorphic phantom was developed to calculate the specific absorbed fraction for several organs. The results were then compared against values calculated with other phantoms (OTOKO of Japan, MIRD of the U.S. and GOLEM of Germany). We compared the specific absorbed fractions of six organs (the adrenals, kidneys, liver, lungs, pancreas and spleen) for two cases: when the source and target organs are the same, and when they are different. When both the source and target organs are the same the organ with the highest specific absorbed fraction regardless of energy level was found to be the adrenals in all phantoms. In comparing phantoms, the phantom developed on the basis of standard Koreans produced the highest specific absorbed fraction. Also, as a result of conducting an assessment by separating source organs from target organs, the phantom developed on the basis of standard Koreans displayed relatively high specific absorbed fractions although there were slight differences per organ.     

Lactic acid aided electrochemical deposition of c-axis preferred orientation of zinc oxide thin films: Structural and morphological features

Compact and homogeneous c-axis preferred orientation of zinc oxide (ZnO) films on indium tin oxide (ITO) coated glass have been prepared electrochemically at −1.2 V vs. Ag|AgCl in a weak acidic condition from 0.06 M Zn(NO₃)₂ with 3 mM lactic acid (LA) added. LA was found having strong influence on the electrodeposition of c-axis preferred orientation of zinc oxide films. Other experimental variables such as deposition temperature, potential, and precursor concentration were also conducted in this article. Among these variables, it was found that precursor concentration of zinc nitrate influenced significantly on growth direction and crystal diameter of zinc oxide. Cyclic voltammetry was used to observe the electrochemistry of the deposition. Crystallinities of the films were examined by X-ray diffractometer. The morphologies of zinc oxide films were observed with a field emitting scanning electron microscope. Optical characteristics of zinc oxide layers were measured with UV-vis spectrophotometer. The band gap of the deposited zinc oxide thin films was evaluated from the Tauc relationship of (αhν)² vs. hν, which was found to be 3.31 eV.     

Analysis of Phenolic Priority Pollutants by High Performance Liquid Chromatography with Electrochemical Detection

Application of high performance liquid chromatography coupled with electrochemical detection (HPLC/EC) to the analysis of phenolic priority pollutants was studied. This method is highly sensitive and selective. Under optimum experimental conditions, the detection limits range from 0.05 ng for phenol to 1.20 ng for pentachlorophenol. The method was successfully applied to the direct determination of trace phenols in industrial wastewaters.     

Structural determination of the low-coverage phase of Al on Si(001) surface

The atomic structure of Al layer on Si(001)-(2 x 1) surface has been studied by coaxial impact collision ion scattering spectroscopy. When 0.5 monolayer (ML) of Al atoms are adsorbed on Si(001) at room temperature, it is found that Al adatoms are dimerized and Al ad-dimers are oriented parallel to the underlying Si dimers at the position of centering T3 site with a height of 1.02 Angstroms from the first layer of Si(001). The bond length of the Al dimer is 2.67 Angstroms. With increasing Al coverage up to one ML, Al ad-dimers still occupied near T3 site and the next favorable site is near HH site.     

Analysis of baclofen by capillary electrophoresis with laser-induced fluorescence detection

A new analytical method for baclofen (4-amino-3-p-chlorophenylbutyric acid) based on capillary electrophoretic separation and laser-induced fluorescence detection has been developed. Naphthalene-2,3-dicarboxaldehyde was used for precolumn derivatization of the non-fluorescent drug. Optimal separation and detection were obtained with an electrophoretic buffer of 50 mM sodium borate (pH 9.5) and a He-Cd laser (excitation at 442 nm, emission at 500 nm). Linearity (r > or = 0.99) over three orders of magnitude was generally obtained and the concentration limit of detection was in the nanomolar level. Coupled with a simple cleanup procedure, the method was successfully applied to the analysis of baclofen in human plasma. Recovery of spiked baclofen in plasma was 98%. The relative standard deviation values on peak size and migration time were 7.9% and 0.4%, respectively. The limit of detection of baclofen in plasma was 10 ng/ml.