Effects of Calcination on the Physical and Photocatalytic Properties of TiO<Subscript>2</Subscript> Powders Prepared by Sol–Gel Template Method

TiO₂ powders were prepared by sol–gel template method and calcined under different conditions. XRD, BET and TEM were used to characterize the TiO₂ powders obtained. The photocatalytic activity of TiO₂ was investigated by the degradation of methyl orange. It was found that TiO₂ powder has the highest photocatalytic activity at a calcination temperature of 673 K. The effects of physical properties such as surface area, crystallinity and crystal phase on the photocatalytic activity of TiO₂ were discussed.     

乙二胺铜－铁氰复合修饰电极薄膜的电沉积和结构表征及电化学性质

乙二胺铜－铁氰复合修饰电极薄膜的电沉积和结构表征及电化学性质陈昌国，李海梅，黄宗卿（重庆大学化工学院重庆６３００４４）关键词：铜、乙二胺，铁氰，修饰电极，光谱普鲁士兰（ＰＢ）修饰电极因其独特的电致变色现象而倍受关注。在１９７８年以来的十余年间里已相继...     

ANN原子参数法预报合金相晶型及晶格常数

运用人工神经网络方法，以二元合金组成元素的电子结构为基本特征，对二元合金相晶型作了区分，进一步对其晶格常数作了预报，结果令人满意。     

用共振电离飞行时间质谱仪分析土壤中超痕量气态金

采用激光共振电离飞行时间质谱技术（简称ＲＩＳ－ＴＯＦ技术）对土壤中超痕量气态金的含量进行了分析研究。ＲＩＳ－ＴＯＦ谱仪具有极高的灵敏度和很强的选择性，避免了对样品的预富集过程。本文给出了该谱仪对金元素的检测限和６５个土壤中气态金样品的分析结果，以及用中子活化法随机抽样检查的结果。     

电子探针定量分析的标准样品——几种多元氧化物单晶

在很高的温度和适宜的生长条件下,分别采用熔盐籽晶法和高温引上法生长了高质量的YAP、NAB、KTP、LN、BBO、SBN等多元氧化物单晶,它们具有优良的物理化学性能,严格的化学比,固定的组成与结构以及较好的化学均匀性和电子束轰击下的稳定性。广泛地用于激光和非线性光学领域。我们选用这些晶体为原材料研制电子探针定量分析的标准样品。经过测量和标定,这些单晶标样符合中华人民共和国国家标准GB 4930-85(电子探针显微分析标准样品通用技术条件)的规定。含有稀土元素的标样如NAB和YAP能发出绿色荧光,是电子显微术中理想的阴极发光材料。     

红厚壳属植物化学成份及药理活性研究进展

综述了近年来对红厚壳属植物中的化学成分及药理活性研究，重点讨论了18种 红厚壳属植物中Zhao吨酮类，香豆素类，黄酮类和萜类的化学成分，并讨论了它们 的药理活性。     

Co-immobilization of polymeric luminol,iron(II) tris(5-aminophenanthroline) and glucose oxidase at an electrode surface,and its application as a glucose optrode

The anodic polymerization of 3-aminophthalhydrazide (luminol) and iron(II) tris 5-aminophenanthroline (Fe(phen-NH2)3(2+)) has been reported in this paper. A bilayer electrode was developed based on these polymers and the ITO conductive glass (denoted ITO[Fe(phen-NH2)3(2+)]luminol electrode). This electrode emitted light (lambdaem: 430 nm) as it was brought into contact with H2O2. At pH 10, the resulting electrochemiluminescence (ECL) showed a linear relationship with the concentration of H2O2 in the range of 10 microM(-1) mM. This bilayer electrode also showed an application potential for the detection of glucose after being further modified with glucose oxidase (denoted ITO[Fe(phen-NH2)3(2+)]luminol]GOx electrode). Although the resulting ECL decayed more rapidly in concentrated glucose solutions (e.g., I M) because of the consumption of luminol during use, the decay became less severe in diluted glucose solutions (e.g., 10 mM). According to the flow injection analysis, a linear relationship existed between the ECL and the concentration of glucose from 10(-5)-10(-3) M at pH 9. The detection limit could reach a level of 5 x 10(-5) M at this pH.     

Improved hygrothermal durability of flax/polypropylene composites after chemical treatments through a hybrid approach

There are growing research interests in flax fibers due to their renewable ‘green’ origin and high strength. However, these natural fibers easily absorb moisture and have poor adhesion with polymer matrix leading to low interfacial strength for the composites. A hybrid chemical treatment technique combining alkali (sodium hydroxide) and silane treatments is adopted in the current study to modify flax fibers for improved performances of flax/polypropylene composites. Changes in chemical composition, microstructure, wettability, surface morphology, crystallinity and tensile properties of single flax fiber before and after chemical treatments were comprehensively characterized using techniques including SEM, FTIR, AFM, XRD, micro-fiber tester, etc. It was found that hemicellulose and lignin at the fiber surface were removed due to alkali treatment, which helped to reduce moisture absorption of the composites. Alkali-treated flax fibers were later subjected to silane treatment, which helped to improve the compatibility between flax fiber and polypropylene matrix. After alkali-silane hybrid chemical treatment, moisture absorption of the composites was further decreased. At the same time, the interfacial bonding strength between flax and polypropylene is significantly enhanced. All these results validate the great advantage of the hybrid chemical treatment approach for flax/polypropylene composites, which has the potential to promote the application of chemical treatment techniques in the plant fiber composite industry.

Graphic abstract

     

In-channel indirect amperometric detection of nonelectroactive anions for electrophoresis on a poly(dimethylsiloxane) microchip

In the present paper, we describe a microfluidics-based sensing system for nonelectroactive anions under negative separation electric field by mounting a single carbon fiber disk working electrode (WE) in the end part of a poly(dimethylsiloxane) microchannel. In contrast to work in a positive separation electric field described in our previous paper (Anal. Chem. 2004, 76, 6902-6907), here the electrochemical reduction reaction at the WE is not coupled with the separation high-voltage (HV) system, whereas the electrochemical oxidation reaction at the WE is coupled with the separation HV system. The electroactive indicator is the carbon fiber WE itself but not dissolved oxygen. This provides a convenient and sensitive means for the determination of nonelectroactive anions by amperometry. The influences of separation voltage, detection potential, and the distance between the WE and the separation channel outlet on the response of the detector have been investigated. The present detection mode is successfully used to electrochemically detect F-, Cl-, SO4(2-), CH3COO-, H2PO4-. Based on the preliminary results, a detection limit of 2 microM and a dynamic range up to three orders of magnitude for Cl- could be achieved.