Temperature or strain induced adjustable-chirp characteristics of uniform fibre grating with tapered metal coating

Temperature and strain characteristics of uniform fibre grating with tapered metal coatings have been analysed theoretically, by which adjustable chirp characteristics of such gratings are shown. Electroplating is adopted to fabricate such gratings, and the tapered metal coating is obtained by gradually drawing the fibre grating out of the solution during the process of electroplating. The gradually changing cross-sectional area of the metal coating is calculated by a newly suggested numerical method. By combining the theoretical and numerical simulation analyses, the gratings' characteristics are given at various temperatures and strains. The results obtained using such a method are also testified by experiments.     

Photoresponse of the In0.3Ga0.7N metal-insulator-semiconductor photodetectors

In0.3Ga0.7N metal-insulator-semiconductor （MIS） and metal-semiconductor （MS） surface barrier photodetectors have been fabricated. The In0.3Ga0.7N epilayers were grown on sapphire by metalorganic chemical vapour deposition （MOCVD）. The photoresponse and reverse current-voltage characteristics of the In0.3Ga0.7N MIS and MS photodetectors were measured. A best zero bias responsivity of 0.18 A/W at 450 nm is obtained for the In0.3Ga0.7N MIS photodetector with 10 nm Si3N4 insulator layer, which is more than ten times higher than the In0.3Ga0.7N MS photodetector. The reason is attributed to the decrease of the interface states and increase of surface barrier height by the inserted insulator. The influence of the thickness of the Si3N4 insulator layer on the photoresponsivity of the MIS photodetector is also discussed.     

Si1Sb2Te3 phase change material for chalcogenide random access memory

This paper investigated phase change Si1Sb2Te3 material for application of chalcogenide random access memory. Current-voltage performance was conducted to determine threshold current of phase change from amorphous phase to polycrystalline phase. The film holds a threshold current about 0.155 mA, which is smaller than the value 0.31 mA of Ge2Sb2Te5 film. Amorphous Si1Sb2Te3 changes to face-centred-cubic structure at ~ 180℃ and changes to hexagonal structure at ~ 270℃. Annealing temperature dependent electric resistivity of Si1Sb2Te3 film was studied by four-point probe method. Data retention of the films was characterized as well.     

Measurement of the tau lepton mass and an upper limit on the mass difference between tau+ and tau-

The mass of the tau lepton has been measured in the decay mode tau-->3pinutau using a pseudomass technique. The result obtained from 414 fb-1 of data collected with the Belle detector is Mtau=[1776.61+/-0.13(stat)+/-0.35(sys)] MeV/c2. The upper limit on the relative mass difference between positive and negative tau leptons is |Mtau+-Mtau-|/Mtau<2.8 x 10-4 at 90% confidence level.     

Theoretical analysis of a simple yet efficient portable magnetic separator design for separation of magnetic nano/micro-carriers from human blood flow

A technology that could physically remove substances from the blood such as biological, chemical, or radiological toxins could dramatically improve treatment of disease. One method in development proposes to use magnetic-polymer spheres to selectively bind toxins and remove them by magnetic filtration. Although magnetic filtration is a developed technology, the clinical boundary conditions described here require a new filter design. We investigated the removal of toxin-bound magnetic carriers from the blood stream using 2-D FEMLAB simulations. The magnetic separator consisted of a permanent magnet with parallel ferromagnetic prisms on the faces and in contact with a straight tube carrying the magnetic-polymer spheres in suspension. We varied the following parameters: blood flow velocity, the size, and number of ferromagnetic prisms, and the ferromagnetic material in both prisms and magnets. The capture efficiency reached maximum values when the depth of the prisms equaled the diameter of the tubing and the saturation magnetization of the prism material equaled twice that of the magnet. With this design a piece of 2 mm (diameter) tube carrying the fluid resulted in 95% capture of 2.0 μm magnetic-polymer spheres at 10 cm/s flow velocity.     

Theoretical analysis of thermal effects in fiber laser from the moment when pump is turned on to steady-state

A theoretical analysis of the pump-induced temperature change and associated thermal phase shift occurring in a fiber laser is presented. The temperature rise and thermal phase shift from the moment when pump is turned on to steady-state in fiber lasers, such as Yb-doped fiber laser, are numerical calculated.With the same parameters, the numerical solution is in good agreement with the finite-element (ANSYS software) simulation.     

Thermal conductance in quantum wire with two obstacles

Based on the scattering-matrix method, the influence of obstacles on the thermal conductance in quantum wire was investigated. Three types of obstacles are employed in our calculation. We present a detailed study of the thermal conductance as a function of distance between two obstacles and temperature. The results show that there is qualitative difference in the dependence of the thermal conductance versus width between two obstacles for different temperatures. We also find that the calculated thermal conductance increases with the width W of quantum wire in all cases.     

水下高光谱衰减测量的不确定度分析

研究了水下高光谱衰减测量仪(ACS)的不确定度。通过不同粒径的标准颗粒(2,5,10,20μm)的米氏散射理论计算值与紫外-可见分光光度计(PE35)的实测值对比,得出:PE35的衰减测量误差最大不超过8%。针对我国高浑浊水体环境,利用ACS与PE35对我国东海浑浊海水样品进行衰减同步测量,结果表明:ACS在浑浊水体下的测量结果被低估,其不确定度与波长呈负相关;水体的浊度对ACS衰减测量的不确定度影响较大,且呈正相关,在低浊度水体下ACS(10 cm)的测量值被低估17.2%~19.04%,ACS(25 cm)的测量值被低估7.84%~15.36%,在高浊度水体下ACS(10 cm)的低估则增至26.4%~28.24%。