An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.     

钍试剂Ⅱ及铍(Ⅱ)-钍试剂Ⅱ电化学行为的研究——Ⅰ.铍(Ⅱ)-钍试剂Ⅱ配合物吸附电流的研究和应用

本文研究了铍(Ⅱ)-钍试剂Ⅱ在EDTA、二苯胍、氨-铵缓冲溶液(pH9.5)中的电极行为和电流性质,并对有关机理进行了探讨。提出痕量铍的测定方法,线性范围为0.0005～0.1μg/ml。检出限为0.2ngBe(Ⅱ)/ Ml。用于煤飞灰中铍的直接测定,操作简单,结果满意。     

A novel trilinear decomposition algorithm： Three-dimension non-negative matrix factorization

Non-negative matrix factorization(NMF)is a technique for dimensionality reduction by placing non-negativity constraints onthe matrix.Based on the PARAFAC model,NMF was extended for three-dimension data decomposition.The three-dimension non-negative matrix factorization(NMF3)algorithm,which was concise and easy to implement,was given in this paper.The NMF3algorithm implementation was based on elements but not on vectors.It could decompose a data array directly without unfolding,which was not similar to that the traditional algorithms do.It has been applied to the simulated data array decomposition andobtained reasonable results.It showed that NMF3 could be introduced for curve resolution in chemometrics.     

Two new compounds from Zingiber officinale

A new cyclic diarylheptanoid,1,5-epoxy-3-hydroxy-1-(3-methoxy-4,5-dihydroxyphenyl)-7-(4-hydroxyphenyl)-heptane (1),as well as a new monoterpene,10-O-β-D-glucopyranosyl-hydroxy cineole (2) were isolated from the rhizomes of Zingiber officinale. The structures of compounds 1 and 2 were established based on their spectral data.In addition,the antioxidant activities of these compounds were also measured.     

CeO2-ZrO2-Y2O3对Pt-Rh型三效催化剂性能的影响

采用共沉淀法技术制备了Ce0.35Zr0.55Y0.10固溶体,并对其进行了比表面积、储氧量的测试和XRD的表征.将其用于低贵金属Pt-Rh型三效催化剂的制备,考察了CeO2-ZrO2-Y2O3对三效催化剂性能的影响.结果表明,Ce0.35Zr0.55Y0.10具有与Ce0.50Zr0.50O2相似的立方结构和相近的储氧量,经高温(1000 ℃)后仍能保持较大的比表面积(38.66 m2·g-1).和含Ce0.50Zr0.50O2的三效催化剂相比,含CeO2-ZrO2-Y2O3的三效催化剂经高温老化后,C3H8,CO,NO仍具有较高的转化率和较低的起燃温度.     

Synthetic erythropoietic proteins: tuning biological performance by site-specific polymer attachment

Chemical synthesis in combination with precision polymer modification allows the systematic exploration of the effect of protein properties, such as charge and hydrodynamic radius, on potency using defined, homogeneous conjugates. A series of polymer-modified synthetic erythropoiesis proteins were constructed that had a polypeptide chain similar to the amino acid sequence of human erythropoietin but differed significantly in the number and type of attached polymers. The analogs differed in charge from +5 to -26 at neutral pH and varied in molecular weight from 30 to 54 kDa. All were active in an in vitro cell proliferation assay. However, in vivo potency was found to be strongly dependent on overall charge and size. The trends observed in this study may serve as starting points for the construction of more potent synthetic EPO analogs in the future.     

Rb3In(H2O)Si5O13: a novel indium silicate with a CdSO4-topological-type structure

A novel indium silicate, Rb3In(H2O)Si5O13, has been synthesized using a high-temperature, high-pressure hydrothermal method and characterized by single-crystal X-ray diffraction. The structure consists of five-membered rings of corner-sharing SiO4 tetrahedra connected via corner sharing to four adjacent five-membered rings to form a 3D silicate framework that belongs to the CdSO4 topological type. The InO6 octahedron shares five of its corners with five different SiO4 tetrahedra to form a 3D frame-work that delimits two types of channels to accommodate the rubidium cations. The sixth corner of InO6 is coordinated H2O. The structure is related to that of the titanium silicate ETS-10, and these are the only two metal silicates that have the CdSO4-topological-type structure. In addition, the crystal of Rb3In(H2O)Si5O13 shows an intense second harmonic generation signal. Crystal data: H2Rb3InSi5O14, monoclinic, space group Cc (No. 9), a = 9.0697(5) A, b = 11.5456(6) A, c = 13.9266(8) A, beta = 102.300(1) degrees, V = 1424.8(1) A3, and Z = 4.     

Oxidation of nitrided si(100) by gaseous atomic and molecular oxygen

The nitridation of Si(100) by ammonia and the subsequent oxidation of the nitrided surface by both gaseous atomic and molecular oxygen was investigated under ultrahigh vacuum (UHV) conditions using X-ray photoelectron spectroscopy (XPS). Nitridation of Si(100) by the thermal decomposition of NH3 results in the formation of a subsurface nitride and a decrease in the concentration of surface dangling bond sites. On the basis of changes in the N1s spectra obtained after NH3 adsorption and decomposition, we estimate that the nitride resides about four to five layers below the vacuum-solid interface and that the concentration of surface dangling bonds after nitridation is only 59% of its value on Si(100)-(2 x 1). Oxidation of the nitrided surface is found to produce an oxide phase that remains in the outer layers of the solid and interacts only weakly with the underlying nitride for oxygen coverages up to 2.5 ML. Slight changes in the N1s spectra observed after oxidizing at 300 K are suggested to arise primarily from the introduction of strain within the nitride, and by the formation of a small amount of Si2=N-O species near the nitride-oxide interface. The nitrogen bonding environment changes negligibly after oxidizing at 800 K, which is indicative of greater phase separation at elevated surface temperature. Nitridation is also found to significantly reduce the reactivity of the Si(100) surface toward both atomic and molecular oxygen. A comparison of the oxygen uptake on the clean and nitrided surfaces shows quantitatively that the decrease in dangling bond concentration is responsible for the reduced activity of the nitrided surface toward oxidation, and therefore that dangling bonds are the initial adsorption site for both gaseous oxygen atoms and molecules. Increasing the surface temperature is found to promote the uptake of oxygen when O2 is used as the oxidant, but brings about only a small enhancement in the uptake of gaseous O-atoms. The different effects of surface temperature on the uptake of O versus O2 are interpreted in terms of the efficiency at which dangling bond pairs are regenerated on the surface at elevated temperature and the different site requirements for the adsorption of O and O2.     

‘Sacrificial’ supramolecular assembly and pressure-induced polymerization: toward sequence-defined functionalized nanothreads

Limited supramolecular strategies have been utilized to synthesize sequence-defined polymers, despite the prominence of noncovalent interactions in materials design. Herein, we illustrate the utility of ‘sacrificial’ aryl-perfluoroaryl supramolecular synthons to synthesize sp³-hybridized nanothreads from sp²-enriched reactants. Our strategy features A–B reactant pairs in the form of a phenol:pentafluorophenol co-crystal that is preorganized for an electronically-biased and sequence-defined polymerization. The polymerization, initiated at 12 GPa, affords an alternating copolymer featuring exogenous –OH functionalities. The external substitution is confirmed through IR spectroscopy. Importantly, the inclusion of the functional unit provides the first experimental glimpse at reaction mechanism: keto–enol tautomerization that can only occur during cycloaddition is observed through IR spectroscopy. Our approach realizes the first example of a functionalized nanothread and attains sequence definition through sacrificial supramolecular preorganization and presents a further approach for de novo design of complex nanothreads.

Supramolecular synthons are exploited to synthesize –OH functionalized sp³-rich sequence-defined nanothreads using pressure-induced polymerization of a phenol:pentafluorophenol co-crystal.      

Electrochemical Properties of Vanadium Oxide Aerogels and Aerogel Nanocomposites

The electrochemical properties of high surface area transition metal oxide aerogels are extremely interesting because aerogels serve to amplify surface effects. As a result, the electrochemical properties are dominated by surfaces rather than by bulk behavior. In the case of vanadium oxide aerogels this leads to extraordinary electrochemical properties, including an extremely high capacity for lithium and electrochemical responses that are both battery-like and capacitor-like. By exploiting sol-gel synthesis, it is possible to synthesize nanocomposite electrodes in which aerogels are in intimate contact with carbon nanotubes. The resulting nanocomposites exhibit superior electrochemical properties, especially at high discharge.