2,2’—二硫代双(4,6—二叔丁基苯酚)的晶体和分子结构

一种塑解剂经高压液体色谱分离制备出主要成份2,2′—二硫代双(4,6二叔丁基苯酚)。由质谱分析得到分子量为474化学式为C_(28)H_(2)O_2S_2、晶体呈现孪生。基体单晶属三斜晶系,空间群为(?)PI(NO.2),晶体结构用直接法解出,=0.07。研究结果表明该分子是二硫代酚类化合物。在EI场中,S—S键断裂是主要断裂过程。晶体中,分子的一个环上的羟基是无序分布的。羟基与最邻近的硫原子形成氢键。     

On existence of solutions for some hyperbolic-parabolic-type chemotaxis systems

In this paper, we discuss the local and global existence ofweak solutions for some hyperbolic–parabolic systems modellingchemotaxis.     

Uniform convergence of Galerkin‐multigrid methods for nonconforming finite elements for second‐order problems with less than full elliptic regularity

In this article we prove uniform convergence estimates for the recently developed Galerkin‐multigrid methods for nonconforming finite elements for second‐order problems with less than full elliptic regularity. These multigrid methods are defined in terms of the “Galerkin approach,” where quadratic forms over coarse grids are constructed using the quadratic form on the finest grid and iterated coarse‐to‐fine intergrid transfer operators. Previously, uniform estimates were obtained for problems with full elliptic regularity, whereas these estimates are derived with less than full elliptic regularity here. Applications to the nonconforming P₁, rotated Q₁, and Wilson finite elements are analyzed. The result applies to the mixed method based on finite elements that are equivalent to these nonconforming elements. © 2002 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 18: 203–217, 2002; DOI 10.1002/num.10004     

VO2-Based Infrared Microbolometer Array

V0₂-based thin film materials on silicon substrates are fabricated by ion beam sputtering and a post-annealing which is different from the conventional fabricating method. An infrared linear microbolometer array with 128 pixels is prepared using as-deposited vanadium dioxide thin films. Optical and electrical properties for V0₂-based microbolometer array are tested.     

Codiameters of 3‐connected 3‐domination critical graphs

A graph G is 3‐domination critical if its domination number γ is 3 and the addition of any edge decreases γ by 1. Let G be a 3‐connected 3‐domination critical graph of order n. In this paper, we show that there is a path of length at least n?2 between any two distinct vertices in G and the lower bound is sharp. © 2002 John Wiley & Sons, Inc. J Graph Theory 39: 76–85, 2002     

Neighborhood unions and the cycle cover number of a graph

For several years, the study of neighborhood unions of graphs has given rise to important structural consequences of graphs. In particular, neighborhood conditions that give rise to hamiltonian cycles have been considered in depth. In this paper we generalize these approaches to give a bound on the smallest number of cycles in G containing all the vertices of G. We show that if for all x, y ? V(G), |N(x) ∩ N(y)| ≧ 2n/5 + 1, then V(G) is coverable by at most two cycles. Several related results and extensions to t cycles are also given.     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Photoinitiated cationic polymerization of cycloaliphatic epoxide with siloxane or alkoxysilane functionalized polyol coatings

Polyols were reacted with tetraethyl orthosilicate (TEOS) or 3-isocyanatopropyltriethoxysilane (IPTES) to form siloxane functionalized polyols. The UV-reactivity of these siloxane functionalized polyols were investigated using real-time FT-IR spectroscopy. The reactivity of TEOS modified polyols was dependent on the relative humidity. However, for the IPTES functionalized polyols the effect of relative humidity was dependent on the degree of IPTES functionalization. When the polyols were only partially functionalized with IPTES, the effect of relative humidity was minimal. However, when polyols were fully functionalized with IPTES, the curing was dependent on relative humidity. The siloxane functionalized polyols were formulated with a cycloaliphatic epoxide and cationic photoinitiator. The photo-induced curing kinetics of these cycloaliphatic epoxide/siloxane functionalized polyol coatings were also investigated. Unlike the TEOS functionalized polyols, the addition of IPTES functionalized polyols into the formulation inhibited the curing speed. This inhibition was attributed to the basicity nitrogen of the urethane linkage. The effect of relative humidity on the UV-curing reaction of cycloaliphatic epoxide coatings was lowered by the incorporation of the TEOS functionalized polyols.     

Flow-injection spectrophotometric determination of sulfadiazine and sulfamethoxazole in pharmaceuticals and urine.

A rapid and sensitive flow-injection spectrophotometric method is proposed for the determination of sulfadiazine and sulfamethoxazole. This method is based on the diazotization of sulfonamide with sodium nitrite, and a coupling reaction of the diazo-compound with alpha-naphthylamine. The optimum experimental conditions are obtained by using the controlled and weighted centroid simplex method. The linear ranges for the determination of sulfadiazine and sulfamethoxazole are 0.2-20 microg ml(-1) and 0.1-20 microg ml(-1), and their detection limits are 0.06 microg ml(-1) and 0.05 microg ml(-1), respectively, and the sampling frequency is 130 samples per hour. The method has been used to determine sulfadiazine and sulfamethoxazole in pharmaceuticals and urine without separation. The results are in agreement with those obtained by a high-performance liquid chromatograph technique at the 95% confidence level.