Electro-oxidation of carbon monoxide on well-ordered Pt(111)/Sn surface alloys

The electro-oxidation of CO on model platinum-tin alloy catalysts has been studied by ex-situ electrochemical measurements following the preparation of the Pt(111)/Sn(2x2) and Pt(111)/Sn(radical3 x radical3)R30 degrees surfaces. A surface redox couple, which is associated with the adsorption/desorption of hydroxide on the Sn sites, is observed at 0.28 V(RHE)/0.15 V(RHE) in H(2)SO(4) electrolyte on both surfaces. Evidence that it is associated with the adsorption of OH comes from ex-situ photoemission measurements, which indicate that the Sn atoms are in a metallic state at potentials below 0.15 V(RHE) and an oxidized state at potentials above 0.28 V(RHE). Specific adsorption of sulfate anions is not associated with the surface process since there is no evidence from photoemission of sulfate adsorption, and the same surface couple is observed in the HClO(4) electrolyte. CO is adsorbed from solution at 300 K, with saturation coverages of 0.37 +/- 0.05 and 0.2 +/- 0.05 ML, respectively. The adsorbed CO is oxidatively stripped at the potential coincident with the adsorption of hydroxide on the tin sites, viz., 0.28 V(RHE). This strong promotional effect is unambiguously associated with the bifunctional mechanism. The Sn-induced activation of water, and promotion of CO electro-oxidation, is sustained as long as the alloy structure remains intact, in the potential range below 0.5 V(RHE). The results are discussed in the light of the requirements for CO-tolerant platinum-based electrodes in hydrogen fuel cell anode catalysts and catalysts for direct methanol electro-oxidation.     

Physico-chemical characterization of nanofiltration membranes.

This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.     

涂敷法制作质谱场电离发射丝的方法及性能研究

本文介绍一种新的质谱场电离发射丝的制备方法——涂敷法,并研究了其制备机理及影响发射丝灵敏度的因素。此外,还对涂敷法制作的发射丝及高温活化法制作的发射丝进行了各项性能对比试验。最后,介绍了涂敷发射丝的应用效果。     

Thermal expansion properties of organic crystals: a CSD study

The thermal expansion properties of crystalline organic compounds are investigated by data mining of the Cambridge Structural Database (CSD). The mean volumetric thermal expansion coefficient is 168.8 × 10⁻⁶ K⁻¹ and the mean uniaxial thermal expansion coefficient is 71.4 × 10⁻⁶ K⁻¹, based on 745 and 1129 different observations, respectively. Normal and anomalous coefficients can be identified using these values and the associated standard deviations. The anisotropy of the thermal expansion is also evaluated and found to have a very broad distribution. 4719 different structures, comprising 4093 different molecular compounds and 626 additional polymorphs have been analyzed on their thermal expansion properties. Approximately 34% of these structures may have at least one orthogonal axis with negative thermal expansion, much more than generally believed. Moreover 127 structures have been identified which could have negative volumetric thermal expansion. Experimental validation using a robust protocol with data collected at more than 2 different temperatures is required to validate these cases.

The thermal expansion properties of crystalline organic compounds are investigated by data mining of the Cambridge Structural Database (CSD). Negative uniaxial thermal expansion is much more common than generally believed.     

Ab initio calculation of the NH(3sigma-)-NH(3sigma-) interaction potentials in the quintet, triplet, and singlet states

We present the ab initio potential-energy surfaces of the NH-NH complex that correlate with two NH molecules in their 3sigma- electronic ground state. Three distinct potential-energy surfaces, split by exchange interactions, correspond to the coupling of the S(A) = 1 and S(B) = 1 electronic spins of the monomers to dimer states with S = 0, 1, and 2. Exploratory calculations on the quintet (S = 2), triplet (S = 1), and singlet (S = 0) states and their exchange splittings were performed with the valence bond self-consistent-field method that explicitly accounts for the nonorthogonality of the orbitals on different monomers. The potential surface of the quintet state, which can be described by a single Slater determinant reference function, was calculated at the coupled cluster level with single and double excitations and noniterative treatment of the triples. The triplet and singlet states require multiconfiguration reference wave functions and the exchange splittings between the three potential surfaces were calculated with the complete active space self-consistent-field method supplemented with perturbative configuration interaction calculations of second and third orders. Full potential-energy surfaces were computed as a function of the four intermolecular Jacobi coordinates, with an aug-cc-pVTZ basis on the N and H atoms and bond functions at the midpoint of the intermolecular vector R. An analytical representation of these potentials was given by expanding their dependence on the molecular orientations in coupled spherical harmonics, and representing the dependence of the expansion coefficients on the intermolecular distance R by the reproducing kernel Hilbert space method. The quintet surface has a van der Waals minimum of depth D(e) = 675 cm(-1) at R(e) = 6.6a0 for a linear geometry with the two NH electric dipoles aligned. The singlet and triplet surfaces show similar, slightly deeper, van der Waals wells, but when R is decreased the weakly bound NH dimer with S = 0 and S = 1 converts into the chemically bound N2H2 diimide (also called diazene) molecule with only a small energy barrier to overcome.     

A High Sensitivity Detection Method of Singlet Oxygen and Superoxide Anion

This paper, for the first time, reports a method that can be used as a highly sensitive probe for singlet oxygen (^1O2) and superoxide anion (O2^-) in vitro or in vivo. FCLA(3,7-dihydro-6-{4-[2-(N‘-(5-fluoresceinyl)thioureido)ethoxy]phenyl}-2-methylimidazo{1,2-a}pyrazin-3-one sodium salt), a chemiluminescence (CL) analysis reagent, has been reported to sensitively react with ^1O2 and O2^- to emit photons with a spectral peak of 525nm. In this work,when human serum albumin (HSA) was added into FCLA solution to enhance the CL intensity,approximately 20 times, compared to that without HSA. The enhanced CL had the same 525 nm spectral peak, identical to that without HSA. By gradually reducing the molecular oxygen content in the solution, we find that the auto-oxidation of oxygen molecules dissolved in the solution plays an important role in the CL process. Based on these experimental evidences, we propose a novel and highly sensitive detection method of ^1O2 and O2^- which may have a great potential in chemical and medical applications.     

Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.     

A mathematical evaluation of dose-dependent PpIX fluorescence kinetics in vivo

The in vivo pharmacokinetics of protoporphyrin IX (PpIX) after administration of 5-aminolevulinic acid (ALA) cannot be described accurately by mathematical models using first-order rate processes. We have replaced first-order reaction rates by dose-dependent (Michaelis-Menten [MM]) reaction rates in a mathematical compartment model. Different combinations of first-order and dose-dependent reaction rates were evaluated to see which one would improve the goodness-of-fit to experimentally determined in vivo PpIX fluorescence kinetics as a function of concentration. The mathematical models that were evaluated are all based on a three-compartment model for drug distribution, conversion to PpIX and subsequent conversion to heme. Implementation of dose-dependent reaction rates improved the goodness-of-fit and enabled interpolation to other drug doses. For most data sets the time constant for delivery to the target cells turned out to be dose dependent. For all data sets the use of MM rates for the conversion of ALA to PpIX yielded better fits. The clearance of PpIX turned out to be a first-order process for all doses and types of administration. Fluorescence curves measured on a specific tissue type but obtained in different studies with different measurement techniques could be described with a single set of parameters.     

一种利用质谱信息进行结构特征鉴定的模式识别方法

本文提出了分段式离子系列谱编码方法,实验证明具有很好的结构表征能力。本程序主要是以模式识别技术为基础,实现了对未知物谱图的KNN分类,进而得到未知物的主要结构特征。这个程序应用于有机化合物的分类,取得了满意的结果。