Spray dried calcium gelled arabinoxylan microspheres: A novel carrier for extended drug delivery

Arabinoxylan (AX) microspheres were formulated by ionotropic gelation for extended drug delivery. AX from Plantago ovata was tested for gelation with aluminium, barium, calcium, magnesium, and iron(III) chloride. Only calcium was found to lead to weak gelation with AX. The conventional needle extrusion produced fragile AX beads with calcium and hence the spray drying process was adopted for the preparation of metronidazole hydrochloride (MH) loaded AX microspheres. MH loading in AX microspheres was 30.8 mass %, 31.9 mass %, and 29.3 mass % in formulations gelled with 0.05 g, 0.1 g, and 0.15 g of calcium chloride per 100 mL of solution, respectively. Scanning electron microscopy revealed the crystallinity reduction of MH in microspheres. The surface of drug loaded calcium gelled AX microsphere was rougher than that of an ungelled one. Interactions of calcium with AX and the amorphous nature of the drug in the microspheres were evidenced by infrared spectroscopy and X-ray diffraction studies. Calcium-induced gelation can extend the drug release to over 90 min in 0.1 M HCl despite the hydrophilic nature of AX and the high solubility of metronidazole.     

Synthesis of dendrimeric N-glyoxylamide peptide mimics

A range of peptidomimetic dendrimers based on 1,3,5-benzenetricarbonyl trichloride and tris(2-aminoethyl)amine central cores has been synthesised through the facile ring-opening of N-acylisatins with amino acids, alcohols and other amines.     

Highly efficient multiphoton-absorbing quadrupolar oligomers for frequency upconversion

Two series of quadrupolar diphenylamino-endcapped oligofluorenes, PhN-OF(n)-NPh (n=2-5) and PhN-OF(n)-TAZ-OF(n)-NPh (n=1-4), which have an electron-withdrawing 1,2,4-triazole (TAZ) moiety as central core, with D-π-A-π-D structural motif (D=donor, A=acceptor), have been synthesized by palladium-catalyzed Suzuki cross-coupling of 9,9-dibutyl-7-(diphenylamino)-2-fluorenylboronic acid and the corresponding (1,2,4-triazole-based) aryl halide as key step. On pumping with infrared femtosecond lasers, these oligomers showed very strong multiphoton-excited blue photoluminescence. These D-π-D and D-π-A-π-D quadrupolar oligofluorenes exhibit superior three-photon absorption properties compared to the respective D-π-A counterparts with a highest three-photon absorption cross-section (σ(3)) of up to 2.72×10(-77) cm(6) s(2) . Despite the comparable linear and multiphoton absorption properties of the two types of quadrupolar oligomers PhN-OF(n)-NPh and PhN-OF(n)-TAZ-OF(n)-NPh, only the former exhibit remarkably intense and highly efficient multiphoton-excited frequency-upconverted deep blue lasing, which gives rise to record high lasing efficiency of 0.097% and very narrow of full width at half-maximum of the lasing spectra. Our findings suggest that quadrupolar-type molecules/oligomers are superior for multiphoton excited frequency upconverted lasing to their dipolar counterparts and also provide important guidelines to design highly efficient three-photon absorption molecules for photoluminescence and lasing applications.     

Efficient two- to five-photon excited violet emission of calix[4]arene-based multiple donor-acceptor assembly

Remarkably strong multiphoton, from two- to five-photon, upconverted violet fluorescence is first observed on a calix[4]arene-based multi-dipolar assembly which is strongly enhanced as compared to that of the corresponding dipolar counterparts.     

Optimizing hollow-fiber-based pharmacokinetic assay via chemical stability study to account for inaccurate simulated drug clearance of rifampicin

With increasing multidrug resistance coupled to a poor development pipeline, clinicians are exploring antimicrobial combinations to improve treatment outcomes. In vitro hollow-fiber infection model (HFIM) is employed to simulate human in vivo drug clearance and investigate pharmacodynamic synergism of antibiotics. Our overarching aim was to optimize the HFIM-based pharmacokinetic (PK) assay by using rifampicin and polymyxin B as probe drugs. An ultrapressure liquid chromatography tandem mass spectrometry method was validated for the quantification of rifampicin and polymyxin B components. In vitro profiling studies demonstrated that the experimental PK profiles of polymyxin B monotherapy were well correlated with the human population PK data while monotherapy with rifampicin failed to achieve the expected maximum plasma concentration. Chemical stability studies confirmed polymyxin B was stable in broth at 37 °C up to 12 h while rifampicin was unstable under the same conditions over 12 and 80 h. The calculated mean clearance of rifampicin due to chemical degradation was 0.098 ml/min accounting for 12.2 % of its clinical total clearance (CL?=?0.8 ml/min) based on population PK data. Our novel finding reinforces the importance to optimize HFIM-based PK assay by performing chemical stability study so as to account for potential discrepancy between experimental and population PK profiles of antimicrobial agents.

Low thermal quenching and high-efficiency Ce, Tb-co-doped Ca3Sc2Si3O12 green phosphor for white light-emitting diodes

Low thermal quenching and high-efficiency Ca₃Sc₂Si₃O₁₂:Ce³⁺ (CSSO:Ce³⁺) phosphors with co-doping Tb³⁺ ion were prepared by a solid state method and the properties of these phosphors were investigated. The results showed that co-doping of Tb³⁺ not only enhances the photoluminescence remarkably and decreases the thermal quenching of the phosphor, but also heightens the performances of the LEDs fabricated with the phosphor. A high-efficiency and low color temperature white LED was fabricated with the prepared CSSO:1%Ce³⁺, 0.5%Tb³⁺ and a red phosphor, indicating that CSSO:1%Ce³⁺,0.5%Tb³⁺ phosphor is a suitable green phosphor for the fabrication of high-efficiency white LEDs.     

稀土离子光谱探针的研究:EuS4N配合物在低温下的可逆相变

从配合物EuS4N低温荧光光谱的研究，可得到温度变化时配合物结构变化多方面的信息。从光谱转变的温度可知道结构变化对应的温度在约160K，对^5D0→^7F0跃迁谱峰的分析可推知结构变化前后Eu^3 配位结构的情况。从发光强度与温度变化的速度、方向的关系可推测结构变化时的热效应，并通过对样品温度的直接测量进行了验证。对配合物发生这种结构变化的可能原因进行了分析。研究表明，Eu^3 离子光谱探针在低温晶体结构的研究中具有某些特殊的优点，可作为单晶X-射线结构分析技术有益的补充。     

Modeling [Fe-Fe] hydrogenase: evidence for bridging carbonyl and distal iron coordination vacancy in an electrocatalytically competent proton reduction by an iron thiolate assembly that operates through Fe(0)-Fe(II) levels

IR spectroelectrochemistry of Fe4{Me(CH2S)3}2(CO)8 (4Fe6S) in the nu(CO) region shows that the neutral and anion forms have all their CO groups terminally bound to the Fe atoms; however, for the dianion there is a switch of the coordination mode of at least one of the CO groups. The available structural and nu(CO) spectra are closely reproduced by density-functional theory calculations. The calculated structure of 4Fe6S2- closely mirrors that of the diiron subsite of the [Fe-Fe] hydrogenase H cluster with a bridging CO group and an open coordination site on the outer Fe atom of pairs of dithiolate-bridged Fe0FeII subunits connected by two bridging thiolates. Geometry optimization based on the all-terminal CO isomer of 4Fe6S2- does not give a stable structure but reveals a second-order saddle point ca. 11.53 kcal mol(-1) higher in energy than the CO-bridged form. Spectroelectrochemical studies of electrocatalytic proton reduction by 4Fe6S show that slow turnover from the primary reduction process (E1/2'=-0.71 V vs Ag/AgCl) involves rate-limiting protonation of 4Fe6S- followed by reduction to H:4Fe6S-. Rapid electrocatalytic proton reduction is obtained at potentials sufficient to access 4Fe6S2-, where the rate of dihydrogen elimination from the FeIIFeII core of 4Fe6S is ca. 500 times faster than that from the FeIFeI core of Fe2(mu-S(CH2)3S)(CO)6. The dramatically increased rate of electrocatalysis obtained from 4Fe6S over all previously identified model compounds appears to be related to the features uniquely common between it and the H-cluster, namely, that turnover involves the same formal redox states of the diiron unit (FeIFeII and Fe0FeII), the presence of an open site on the outer Fe atom of the Fe0FeII unit, and the thiolate-bridge to a second one-electron redox unit.     

Intensities of line features in vibration-rotational bands 2–0 to 6–0 of NO XΠr and experimental evaluation of a radial function for electric dipolar moment

We measured the strengths of individual line-like features, representing unresolved Λ doublets, in vibration-rotational bands 2–0 to 6–0 of ¹⁴N¹⁶O within each substate of electronic ground state X²Π_1/2,3/2 in mid and near infrared regions. Analyses of these data to derive values of matrix elements for vibrational transitions enabled production of a radial function for electric dipolar moment, containing seven parameters, that satisfactorily reproduces the intensities of about 700 such features for vibrational states up to ν = 6.