Effect of vapor condensation on forced convection heat transfer of moistened gas

The forced convection heat transfer with water vapor condensation is studied both theoretically and experimentally when wet flue gas passes downwards through a bank of horizontal tubes. Extraordinarily, discussions are concentrated on the effect of water vapor condensation on forced convection heat transfer. In the experiments, the air–steam mixture is used to simulate the flue gas of a natural gas fired boiler, and the vapor mass fraction ranges from 3.2 to 12.8%. By theoretical analysis, a new dimensionless number defined as augmentation factor is derived to account for the effect of condensation of relatively small amount of water vapor on convection heat transfer, and a consequent correlation is proposed based on the experimental data to describe the combined convection–condensation heat transfer. Good agreement can be found between the values of the Nusselt number obtained from the experiments and calculated by the correlation. The maximum deviation is within ±6%. The experimental results also shows that the convection–condensation heat transfer coefficient increases with Reynolds number and bulk vapor mass fraction, and is 1∼3.5 times that of the forced convection without condensation.     

A first regularity result for the Armstrong–Frederick cyclic hardening plasticity model with Cosserat effects

The purpose of this article is to prove the Hölder continuity up to the boundary of the displacement vector and the microrotation matrix for the quasistatic, rate-independent Armstrong–Frederick cyclic hardening plasticity model with Cosserat effects. This model is of non-monotone and non-associated type. In the case of two space dimensions we use the hole-filling technique of Widman and Morrey's Dirichlet growth theorem.     

Intercomparison of techniques for estimation of sedimentation rate in the Sabah and Sarawak coastal waters

A total of eight sediment cores with 50 cm length were taken in the Sabah and Sarawak coastal waters using a gravity corer in 2004 to estimate sedimentation rates using four mathematical models of CIC, Shukla-CIC, CRS and ADE. The average of sedimentation rate ranged from 0.24 to 0.48 cm year^?1, which is calculated based on the vertical profile of ²¹⁰Pb_ex in sediment core. The finding also showed that the sedimentation rates derived from four models were generally shown in good agreement with similar or comparable value at some stations. However, based on statistical analysis of paired sample t-test indicated that CIC model was the most accurate, reliable and suitable technique to determine the sedimentation rate in the coastal area.     

Chiral mesoporous silica: chiral construction and imprinting via cooperative self-assembly of amphiphiles and silica precursors

Fabrication of chiral materials and revealing the mechanisms involved in their formation are crucial issues in scientific research. The combination of cooperative self-assembly routes and the chiral templating process favors the formation of inorganic chiral materials with highly ordered mesostructures. This tutorial review highlights the recent research on chiral mesoporous silica (CMS) of hierarchical helical constructions transcribed from organic templates. The rules and mechanisms involved in the synthesis of CMS and related materials, especially the novel expression of chirality and imprinting of helical micellar superstructure by the functional groups immobilized on the mesopore surface, provide us with a deeper insight into the chiral self-assembly process and new strategies for the design and application of chiral materials. This review is addressed to researchers and students interested in chiral chemistry, supramolecular chemistry and mesoporous materials (53 references).     

Anionic-cationic switchable amphoteric monodisperse mesoporous silica nanoparticles

Anionic-cationic switchable monodisperse mesoporous silica nanoparticles were synthesized by one-pot amino and carboxylic acid bifunctionalization based on the self-assembly of the surfactant, two types of co-structure-directing agents containing amino and carboxylic groups, and silica sources. These nanoparticles revealed properties of dispersity and reversibility, with the advantage of the pH-responsive anionic-cationic/acid-base switchability. It was demonstrated that the extracted materials achieved reutilization and controllable dispersity in aqueous solution by adjusting the static electric power among the particles during the switching process.     

Production of a biomimetic Fe(I)-S phase on pyrite by atomic hydrogen beam surface reactive scattering

Molecular beam surface scattering and X-ray absorption spectroscopic experiments were employed to study the reaction of deuterium atoms with a pyrite, FeS(2) (100), surface and to investigate the electronic and geometric structures of the resulting Fe-S phases. Incident D atoms, produced by a radiofrequency plasma and expanded in an effusive beam, were directed at a pyrite surface held at various temperatures from ambient up to 200 °C. During exposure to the D-atom beam, D(2)S products were released with a thermal distribution of molecular speeds, indicating that the D atoms likely reacted in thermal equilibrium with the surface. The yield of D(2)S from the surface decreased approximately exponentially with exposure duration, suggesting that the surface accessible sulfur atoms were depleted, thus leaving an iron-rich surface. This conclusion is consistent with X-ray absorption measurements of the exposed surfaces, which indicated the formation of a layered structure, with elemental iron as the outermost layer on top of a formally Fe((I))-S phase as an intermediate layer and a formally Fe((II))-S(2) bulk pyrite layer at lower depths. The reduced Fe((I))-S phase is particularly remarkable because of its similarity to the catalytically active sites of small molecule metalloenzymes, such as FeFe-hydrogenases and MoFe-nitrogenases.     

Electroactive SWNT/PEGDA hybrid hydrogel coating for bio-electrode interface

Electric interface between neural tissue and electrode plays a significant role in the development of implanted devices for continuous monitoring and functional stimulation of central nervous system in terms of electroactivity, biocompatibility and long-term stability. To engineer an interface that possesses these merits, a polymeric hydrogel based on poly(ethylene glycol) diacrylate (PEGDA) and single-walled carbon nanotubes (SWNTs) were employed to fabricate a hybrid hydrogel via covalent anchoring strategy, i.e., self-assembly of cysteamine (Cys) followed by Michael addition between Cys and PEGDA. XPS characterization proves that the Cys molecules are linked to gold surface via the strong S-Au bond and that the PEGDA macromers are covalently bonded to Cys. FTIR spectra indicate the formation of hybrid hydrogel coating during photopolymerization. Electrochemical measurements using cyclic voltammetry (CV) and impedance spectrum clearly show the enhancement of electric properties to the hydrogel by the SWNTs. The charge transfer of the hybrid hydrogel-based electrode is quasi-reversible and charge transfer resistance decreases to the tenth of that of the pure hydrogel due to electron hopping along the SWNTs. Additionally, this hybrid hydrogel provides a favorable biomimetic microenvironment for cell attachment and growth due to its inherent biocompatibility. Combination of these merits yields hybrid hydrogels that can be good candidates for application to biosensors and biomedical devices. More importantly, the hybrid hydrogel coatings fabricated via the current strategy have good adhesion to the electrode substrate which is highly desired for chronically implantable devices.     

Tissue-spray ionization mass spectrometry for raw herb analysis

Tissue-spray ionization mass spectrometry is developed for the in situ chemical analysis of raw herbs under ambient conditions. We demonstrated that analyte molecules could be directly sprayed and ionized from solvent-wetted ginseng tissues upon the application of high electrical voltage to the tissue sample. Abundant phytochemicals/ metabolites, including ginsenosides, amino acids and oligosaccharides, could be detected from ginseng tissues when the tissue-spray experiments were conducted in positive ion mode. Thermally labile and easily hydrolyzed malonyl-ginsenosides were also detected in negative ion mode. The tissue-spray ionization method enables the direct detection of analytes from raw herb samples and preserves the sample integrity for subsequent morphological and/ or microscopic examination. In addition, this method is simple and fast for chemical profiling of wild-type and cultivated-type American ginsengs with differentiation.     

Virgatolides A-C, benzannulated spiroketals from the plant endophytic fungus Pestalotiopsis virgatula

Virgatolides A-C (1-3), unique metabolites with a 3',4',5',6'-tetrahydrospiro[chroman-2,2'-pyran] core, were isolated from cultures of the plant endophytic fungus Pestalotiopsis virgatula. Compounds 1-3 possess two previously undescribed skeletons originating from a benzannulated 6,6-spiroketal and one (2 and 3) and two (1) γ-lactone units, respectively. The structure of 1 was secured by X-ray crystallography.