Ab initio study of mechanism of forming germanic bis-heterocyclic compound between germylene carbene (H2GeC:) and acetone

The mechanism of the cycloaddition reaction of forming germanic bis-heterocyclic compound between singlet germylene carbene and acetone has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD (T)//MP2/6-31G* method. From the potential energy profile, it can be predicted that the dominant reaction pathway of the cycloadditional reaction of forming germanic bis-heterocyclic compound consists of three steps: (1) the two reactants firstly form an intermediate INT4 through a barrier-free exothermic reaction of 181.4 kJ/mol; (2) INT4 further reacts with acetone (R2) to form an intermediate (INT5), which is also a barrier-free exothermic reaction of 148.9 kJ/mol; (3) INT5 then isomerizes to a germanic bis-heterocyclic product P5 via a transition state TS5 with an energy barrier of 53.3 kJ/mol.     

Direct electrocatalytic reduction of hydrogen peroxide at a glassy carbon electrode modified with polypyrrole nanowires and platinum hollow nanospheres

A nonenzymatic sensor for hydrogen peroxide has been fabricated by dispersing platinum hollow nanospheres onto polypyrrole (PPy) nanowires to form a PPy-Pt hollow sphere nanocomposite on a glassy carbon electrode. The materials were characterized by transmission electron microscopy and scanning electron microscopy. The process and the sensor were characterized by electrochemical impedance spectroscopy, cyclic voltammetry, and chrono-amperometry and revealed that the electrode has a large electroactive surface area and small resistance to electron transfer. The linear range for the determination of hydrogen peroxide is from 3.5 µM to 9.9 mM, the detection limit is 1.2 µM (S/N?=?3), and the response time is 3 s. The electrode exhibited good stability and excellent repeatability.     

Phosphoric acid doped high temperature proton exchange membranes based on sulfonated polyetheretherketone incorporated with ionic liquids

A composite membrane was fabricated using a novel approach based on the ionic liquids 1-butyl-3-methylimidazolium chloride or 1-butyl-3-methylimidazolium hexafluorophosphate, sulfonated polyetheretherketone (SPEEK), and phosphoric acid. This proton conducting composite membrane shows promise for operation in high temperature proton exchange membrane fuel cells at working temperatures up to 160 °C without humidification. Proton conductivity at a level of 2.0 × 10^? 2 S/cm was achieved at 160 °C by the composite membrane with a molar ratio of 1:0.6:9 for SPEEK, 1-butyl-3-methylimidazolium (BMIM) cation and phosphoric acid, respectively. The sulfonation degree was 0.643 per polymer repeat unit with over 90% of the sulfate fixed anions forming a salt complex with BMIM cations. The tensile stress at break of the composite membrane was 15.5 MPa at room temperature, and it decreased from 4.1 to 1.9 MPa when the temperature increased from 110 to 160 °C, respectively.     

All-solid-state Nd:Gd<Subscript>0.18</Subscript>Y<Subscript>0.82</Subscript>VO<Subscript>4</Subscript>-LBO green laser at 532 nm

We report a continuous-wave (CW) coherent green radiation at 532 nm by intracavity frequency doubling generation of 1064 nm Nd:Gd_0.18Y_0.82VO₄ laser. With incident pump power of 18.2 W, output power of 1.08 W at 532 nm has been obtained using a 5 mm-long KTP crystal. The optical conversion efficiency was up to 5.9%. At the output power level of 1.08 W, the output stability is better than 5%. The beam quality M² values were equal to 1.26 and 1.12 in X and Y directions, respectively.     

Dual-wavelength laser operation at 1061 and 942 nm in Nd:GSAG

A dual-wavelength continuous-wave (CW) diode end-pumped gadolinium scandium aluminum garnet (Nd:GSAG) laser that generates simultaneous laser action at the wavelengths 1061 and 942 nm is demonstrated. A total output power of 589 mW (476 mW at 1061 nm and 113 mW at 942 nm) for the dual-wave-length was achieved at the incident pump power of 18.2 W. The M ² values for 942 and 1061 nm lights were found to be around 1.18 and 1.37, respectively.     

A study of the effect of laser beam geometries on laser bending of sheet metal by buckling mechanism

Laser beam forming has emerged as a new and very promising technique to form sheet metal by thermal residual stresses. The objective of this work is to investigate numerically the effect of rectangular beam geometries, with different transverse width to length aspect ratio, on laser bending process of thin metal sheets, which is dominated by buckling mechanism. In this paper, a comprehensive thermal and structural finite element (FE) analysis is conducted to investigate the effect that these laser beam geometries have on the process and on the final product characteristics. To achieve this, temperature distributions, deformations, plastic strains, stresses, and residual stresses produced by different beam geometries are compared. The results suggest that beam geometries play an important role in the resulting temperature distributions on the workpiece. Longer beam dimensions in the scanning direction (in relation to its lateral dimension) produce higher temperatures due to longer beam–material interaction time. This affects the bending direction and the magnitude of the bending angles. Higher temperatures produce more plastic strains and hence higher deformation. This shows that the temperature-dependent yield stress plays a more dominant role in the deformation of the plate than the spread of the beam in the transverse direction. Also, longer beams have a tendency for the scanning line to curve away from its original position to form a concave shape. This is caused by buckling which develops tensile plastic strains along both ends of the scanning path. The buckling effect produces the opposite curve profile; convex along the tranverse direction and concave along the scanning path.     

Molecular histology analysis by matrix-assisted laser desorption/ionization imaging mass spectrometry using gold nanoparticles as matrix

Gold nanoparticles (AuNPs) were applied and optimized as matrix for matrix-assisted laser desorption/ionization mass spectrometry analysis of animal tissues, and enabled histological analysis of animal tissues at molecular level by imaging mass spectrometry (IMS). AuNPs were coated on animal tissue in a solvent-free manner via argon ion sputtering. Metabolites, including neurotransmitters, fatty acids and nucleobases, were directly detected from mouse brain tissue. Based on region-specific chemical profiles, fine histological features of mouse brain tissue and heterogeneous regions of tumor tissue were both revealed.     

Electrochemical hydrogen storage properties of melt-spun Ti0.9Zr0.1V0.2Ni1.5La0.5 alloy

The Ti_0.9Zr_0.1V_0.2Ni_1.5La_0.5 alloy samples were synthesized by melt-spinning technique at the different wheel velocity (cooling rate), and the structure and electrochemical hydrogen storage properties were investigated. The result indicated that the structure of the melt-spun ribbons mainly contains C14 Laves phase and V-based solid solution phase. The discharge capacity, cyclic stability, high-rate discharge ability and electrochemical kinetic of the alloy electrodes are correlated with the cooling rate (wheel velocity), and the maximum discharge capacity is over 200 mA·h/g at the wheel velocity of 20 m/s.     

部分有机物蝌蚪麻醉活性的预测

基于定量结构-活性相关性（QSAR）原理,研究了49种有机化合物结构与其蝌蚪麻醉活性的内在定量关系。首先应用分子电性作用矢量（molecular electronegativity interaction vector,MEIV）表征49种有机化合物的结构,再采用多元线性回归（MLR）方法建立了相应的QSAR预测模型,最后对所建模型分别进行了内部验证和外部验证。所建模型的复相关系数(Rcum)、留一法(LOO)交互校验复相关系数(RCV)和外部样本校验复相关系数(Qext)分别为0.9415、0.9127和0.9253,证明该模型均具有较高的稳定性和预测能力。     

任意偏振激光作用下二维模型H原子的谐波发射

采用二维渐近边界条件和辛算法数值求解了任意偏振激光和H原子相互作用的二维含时Schrödinger方程的无穷空间初值问题. 计算了二维H原子在不同偏振激光作用下的谐波发射,得到各种椭圆率下谐波谱的特点与已有文献结果一致.通过电子的基态布居概率和某一时刻的概率密度分布以及电子的平均位移,对不同椭圆率下谐波谱的特点进行了分析. 结果表明,将渐近边界条件和辛算法推广到二维是合理和有效的. 关键词： 二维渐近边界条件 辛算法 任意偏振激光 高次谐波