The minimal prime spectrum of rings with annihilator conditions

In this paper, we study rings with the annihilator condition (a.c.) and rings whose space of minimal prime ideals, , is compact. We begin by extending the definition of (a.c.) to noncommutative rings. We then show that several extensions over semiprime rings have (a.c.). Moreover, we investigate the annihilator condition under the formation of matrix rings and classical quotient rings. Finally, we prove that if R is a reduced ring then: the classical right quotient ring Q(R) is strongly regular if and only if R has a Property (A) and is compact, if and only if R has (a.c.) and is compact. This extends several results about commutative rings with (a.c.) to the noncommutative setting.     

Ferroelectric metal-organic framework with a high dielectric constant

Hydrothermal reaction of (l)-N-(4'-cyanobenzy)-(S)-proline with CdCl2 as a Lewis acid catalyst and NaN3 gives colorless block compound 1, in which 1 displays a complicated 3D framework. Ferroelectric and dielectric property measurements reveal that 1 exhibits physical properties comparable to that of a typical ferroelectric compound with a dipole relaxation process and a dielectric constant of ca. 38.6 that makes it, by definition, a high dielectric material.     

"Orthogonal" separations for reversed-phase liquid chromatography

A general procedure is proposed for the rapid development of a reversed-phase liquid chromatographic (RP-LC) separation that is "orthogonal" to a pre-existing ("primary") method for the RP-LC separation of a given sample. The procedure involves a change of the mobile-phase organic solvent (B-solvent), the replacement of the primary column by one of very different selectivity, and (only if necessary) a change in mobile phase pH or the use of a third column. Following the selection of the "orthogonal" B-solvent, column and mobile phase pH, further optimization of peak spacing and resolution can be achieved by varying separation temperature and either isocratic %B or gradient time. The relative "orthogonality" of the primary and "orthogonal" RP-LC methods is then evaluated from plots of retention for one method versus the other. The present procedure was used to develop "orthogonal" methods for nine routine RP-LC methods from six pharmaceutical analysis laboratories. The relative success of this approach can be judged from the results reported here.     

Differentiation of herbs linked to "Chinese herb nephropathy" from the liquid chromatographic determination of aristolochic acids

A HPLC method was developed and applied to analyze aristolochic acids (AA-I and AA-II) in Chinese medicinal herbs. The herb samples were extracted by using ultrasonication with the extraction efficiency of better than 82%. Extracts were then filtered and injected onto a C18 column eluting under a gradient program using methanol and water-containing 0.5% acetic acid. The method with the detection limits of 1.33 ng for AA-I and 7.29 ng for AA-II per injection was successfully applied for the analysis of traditional Chinese medicine (TCM) and related products and differentiation of Chinese medicinal herbs that have previously been misused and caused toxicological effects. The developed protocol provided an example that analysis of selected component markers could serve for health security and quality control of TCM consumption.     

Electron capture dissociation of peptides metalated with alkaline-earth metal ions

The possible use of divalent alkaline-earth metal ions, including Mg2+, Ca2+, Sr2+, and Ba2+, as charge carrier for electron capture dissociation of peptides was investigated. Model peptides of RGGGVGGGR and NGGGWGGGN were used to simplify the interpretation of spectral information. It was demonstrated that useful electron capture dissociation (ECD) tandem mass spectra of these metalated peptides could be generated. Interestingly, peptides metalated with different alkaline-earth metal ions generated very similar ECD tandem mass spectra. Metalated c-ions and z-ions were the predominant fragment ions. Only Mg2+-metalated peptides gave somewhat different results. Some nonmetalated c-ions were observed from ECD of [RGGGVGGGR + Mg]2+ but not from [NGGGWGGGN + Mg]2+. Together with some ab initio calculations, it was established that the bound metal ions might activate the acidity of the amide hydrogen. With the presence of high proton affinity moiety, such as N-terminal amino group and/or side chain of the arginine residues, the metalated peptide ions could exist predominantly in their zwitterion forms, in which one or two backbone amide group(s) was deprotonated and the high proton affinity functional group(s) was protonated. It was believed that electron capture leads primarily to the reduction of the mobile proton rather than the metal ions. With this zwitterion model, the formation of nonmetalated c-fragments and the generation of similar ECD spectra for peptides metalated with various alkaline-earth metal ions could readily to be explained. Another interesting observation in the ECD mass spectra of metalated peptides is related to the enhanced formation of the minor ECD products, i.e., (c - 1)(+*) and (z + 1)+ ions. Together with ab initio calculations using a truncated peptide model, various possible reaction mechanisms for the formation of these minor ECD products were evaluated. It was concluded that hydrogen transfer between the initiated formed c and z(.) species plays an important role in the formation (c - 1)(+*) and (z + 1)+ ions. Although peptides metalated with these metal ions do not have better ECD efficiency compared to the multiply-protonated peptides, it provides practical accessibility of ECD methods to analyze small peptides with no basic amino acid residues.     

A novel approach to oligonucleotide synthesis using an imidazolium ion tag as a soluble support

The synthesis of oligonucleotides in solution using a soluble, ionic liquid based support is described. Short oligomers of varying base composition were synthesized using this method in high yields and high purity, requiring no chromatography for purification prior to cleavage from the support. The solution-phase-synthesized oligomers were compared to the same sequences prepared using standard gene machine techniques by LCMS. This methodology may provide a cheaper route for the large-scale synthesis of oligonucleotides.     

A new approach for the detection of a nonfluorescent compound by CE-resonance Raman spectroscopy based on the sweeping-MEKC mode

A CE-resonance Raman spectroscopy (CE-RRS) method based on MEKC and sweeping-MEKC modes is described. A nonfluorescent compound, malachite green (MG), and a doubled Nd:YAG laser (532 nm, 300 mW) were selected as model compound and light source, respectively. In order to carry out a quantitative analysis of MG, a monochromator (effective bandwidth, 0.4 nm) was used to collect the specific Raman line at 1616 cm(-1) (N-phi and C-C stretch, corresponding to 582 nm when the wavelength of the exciting source was 532 nm). As a result, the LOD for MG was 10 ppm, based on the MEKC/RRS mode. This could be improved to 5 ppb when the sweeping-MEKC/RRS mode was applied. Furthermore, with the addition of nano-size silver colloids to the CE buffer the detection limits can be further improved, but the data obtained with surface-enhanced resonance Raman spectroscopy (SERRS) are less useful for quantitative purposes.     

Fourier transform ultraviolet-visible spectrometer based on a beam-folding technique

A beam-folding technique in optical interferometry, where the number of beam folds used can be very large, is reported. This technique can be used as a low-cost position-tracking method in a Fourier transform spectrometer (FTS) to cover the broad spectral range from UV to IR. The main advantage gained is the simple position-tracking algorithm used in sampling the interferogram. We have developed a UV-visible FTS, whose wavelength coverage is limited only by the optical elements (350 nm(-1) microm with off-the-shelf components). Preliminary results show that it can achieve a resolution of approximately 4 cm(-1) even with a ball-bearing translation stage.     

Alternating Poly(Pt‐salphen)‐(p‐phenyleneethynylene) as Phosphorescent Conjugated Linear‐Rod and Coilable Sensory Materials

Phosphorescent conjugated polymers consisting of alternating p‐phenylene‐ethynylene and ‘para‐’ or ‘meta‐type’ Pt(II)‐salphen luminophore units have been synthesized. Side‐arms bearing different substituents (n‐alkoxy and acetylated‐sugar) have afforded contrasting emission properties that are attributed to the polymer conformation, extent of π‐stacking interactions and differences in chemical structure. Intriguing selectivity in luminescent sensing of metal ions has been observed.

     

白光LED用铽铕共掺镓酸锌微晶玻璃的制备、结构与发光性能研究

采用溶胶-凝胶法制备了Tb3+/Eu3+共掺ZnGa2O4微晶玻璃,研究了热处理温度对材料显微结构的影响以及不同稀土离子掺杂材料的发光性能.结果表明干凝胶样品在800～900℃温度热处理后可得到透明的含尖晶石结构ZnGaO4微晶玻璃,在1000℃热处理时由于SiO2非晶基体晶化析出三方Zn2SiO4与六方SiO2晶相导致样品失透.在微晶玻璃中具有ZnGa2O4纳米晶到Tb3+与Eu3+的能量传递.在900℃热处理Tb3+/Eu3+∶ZnGa2O4微晶玻璃样品中,Tb3+与Eu3+分别发射绿光和红光,并与ZnGa2O4纳米晶发射的蓝光组合成近白光发射.