CO oxidation of bare and TiO2-coated NiO-Ni(OH)2 nanoparticles

CO oxidation reactivity of bare and TiO₂-coated nanoparticles consisting of both NiO and Ni(OH)₂ surfaces was studied. For the deposition of TiO₂, atomic layer deposition was used, and formation of three-dimensional domains of TiO₂ on NiO-Ni(OH)₂ could be identified. Based on the data of X-ray Photoelectron Spectroscopy, we suggest that upon TiO₂ deposition only Ni(OH)₂ was remained on the surface, whereas NiO surface disappeared. Both CO adsorption and CO oxidation took place on NiO-Ni(OH)₂ surfaces under our experimental conditions. CO adsorption was almost completely suppressed after TiO₂ deposition, whereas CO oxidation activity was maintained to large extent. It is proposed that bare NiO cannot be active for CO oxidation, and can only uptake CO under our experimental condition, whereas hydroxylated surface of NiO can be active for CO oxidation.     

Holographic simultaneous readout polarization multiplexing based on photoinduced anisotropy in bacteriorhodopsin

Bacteriorhodopsin (bR) is a reversible photochromic protein that can be used as a holographic medium. The dichroic absorption of the bR molecule is polarization dependent, thereby allowing for the recording of polarization holograms. The properties of polarization holograms can be used to multiplex two independent images in a single bR film. A new technique and associated polarization-multiplexing scheme are demonstrated that allow for simultaneous readout of two orthogonally polarized images while achieving a high normalized diffraction efficiency for each of the individual images.     

Multichannel transceiver dual-tuned RF coil for proton/sodium MR imaging of knee cartilage at 3 T

Sodium magnetic resonance (MR) imaging is a promising technique for detecting changes of proteoglycan (PG) content in cartilage associated with knee osteoarthritis. Despite its potential clinical benefit, sodium MR imaging in vivo is challenging because of intrinsically low sodium concentration and low MR signal sensitivity. Some of the challenges in sodium MR imaging may be eliminated by the use of a high-sensitivity radiofrequency (RF) coil, specifically, a dual-tuned (DT) proton/sodium RF coil which facilitates the co-registration of sodium and proton MR images and the evaluation of both physiochemical and structural properties of knee cartilage. Nevertheless, implementation of a DT proton/sodium RF coil is technically difficult because of the coupling effect between the coil elements (particularly at high field) and the required compact design with improved coil sensitivity. In this study, we applied a multitransceiver RF coil design to develop a DT proton/sodium coil for knee cartilage imaging at 3 T. With the new design, the size of the coil was minimized, and a high signal-to-noise ratio (SNR) was achieved. DT coil exhibited high levels of reflection S11 (～-21 dB) and transmission coefficient S12 (～-19 dB) for both the proton and sodium coils. High SNR (range 27-38) and contrast-to-noise ratio (CNR) (range 15-21) were achieved in sodium MR imaging of knee cartilage in vivo at 3-mm(3) isotropic resolution. This DT coil performance was comparable to that measured using a sodium-only birdcage coil (SNR of 28 and CNR of 20). Clinical evaluation of the DT coil on four normal subjects demonstrated a consistent acquisition of high-resolution proton images and measurement of relative sodium concentrations of knee cartilages without repositioning of the subjects during the same MR scanning session.     

Role of photon statistics of light source in ghost imaging

The theory of ghost imaging is examined by taking into account the quantum state of the light source explicitly. It is proved that ghost images can be obtained by any light source that is non-Poissonian. It is also shown that ghost images with unity visibility can be achieved with either quantum or classical correlation.     

Compact optical function generator

We demonstrate the use of a nonlinear photonic crystal to generate a harmonic comb and an ultrabroad-band acousto-optic modulator for the field amplitudes and phases of the comb to succeed in synthesizing femtosecond and subfemtosecond optical field waveforms. Nonsinusoidal fields of various shapes are synthesized and verified using shaper-assisted linear cross-correlation. The compact all-solid-state system could lead to the realization of a portable arbitrary optical waveform synthesizer that is analogous in many aspects to an RF function generator.     

Surface roughness investigation of semi-conductor wafers

Conventionally, surface roughness is predominantly determined through the use of stylus instruments. However, there are certain limitations involved in the method, particularly when a test specimen, such as a silicon wafer, has a smooth mirror-like surface. Hence, it is necessary to explore alternative non-contact techniques. Light scattering has recently been gaining popularity as an optical technique to provide prompt and precise inspection of surface roughness. In this paper, the total integrated scattering (TIS) model is modified to retrieve parameters on surface micro-topography through light scattering. The applicability of the proposed modified TIS model is studied and compared with an atomic force microscope. Experimental results obtained show that the proposed technique is highly accurate for measuring surface roughness in the nanometer range.     

Blind quantum computation with identity authentication

Blind quantum computation (BQC) allows a client with relatively few quantum resources or poor quantum technologies to delegate his computational problem to a quantum server such that the client's input, output, and algorithm are kept private. However, all existing BQC protocols focus on correctness verification of quantum computation but neglect authentication of participants' identity which probably leads to man-in-the-middle attacks or denial-of-service attacks. In this work, we use quantum identification to overcome such two kinds of attack for BQC, which will be called QI-BQC. We propose two QI-BQC protocols based on a typical single-server BQC protocol and a double-server BQC protocol. The two protocols can ensure both data integrity and mutual identification between participants with the help of a third trusted party (TTP). In addition, an unjammable public channel between a client and a server which is indispensable in previous BQC protocols is unnecessary, although it is required between TTP and each participant at some instant. Furthermore, the method to achieve identity verification in the presented protocols is general and it can be applied to other similar BQC protocols.     

Refraction of water waves by periodic cylinder arrays

We show that in the long wavelength limit, water waves propagate through an array of bottom-mounted vertical cylinders as if the water has an effective depth and effective gravitational constant that depends on the filling ratio of the cylinders, leading to refraction phenomena that can be described by analytic formulas. The results are obtained with rigorous homogenization techniques, as well as the multiple scattering formalism that gives full dispersion relationships. This phenomenon provides a mechanism to control the flow of ocean wave energy, as exemplified by a water-wave focusing lens.     

Effect of bias field on the dielectric properties of 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 single crystals with different orientations

Microdomain-macrodomain transformations and phase transitions in 0.7Pb(Mg_1/3Nb_2/3)O₃-0.3PbTiO₃ single crystals were investigated by studying their relative permittivity under various dc bias at constant heating and cooling rates. The orientation dependence of the bias field effect was revealed by examining the temperature dependence of relative permittivity as a function of crystal orientation (the 111, 011 and 001 directions) and dc bias field. The crystals have a microdomain rhombohedral ferroelectric state in the ferroelectric phase under zero dc bias. External bias field could modulate the domain state and induce a macrodomain state in the crystals. Also, it is proposed that the dc bias applied along the 001 or 011 direction could induce a tetragonal ferroelectric phase or an orthorhombic ferroelectric phase, respectively, in an intermediate temperature range. PACS 77.80.-e; 77.22.-d; 81.40.-z     

A Comparative ESR Study on Blood and Tissue Nitric Oxide Concentration during Renal Ischemia-Reperfusion Injury

Electron paramagnetic resonance (EPR) spin trapping technology is a sensitive and unambiguous method for detection of nitric oxide (NO). Due to the short lifetime, NO must be trapped before EPR measurement. There are two EPR spin trapping techniques used currently, including the detections of EPR signals of diethyldithiocarbamate-iron-nitric oxide (DETC₂-Fe²⁺-NO) and nitrosyl hemoglobin (HbNO). In this study, we firstly investigated the kinetics of the EPR signal of DETC₂-Fe²⁺-NO in normal and ischemia-reperfused kidneys. In normal rat kidneys, the signal of DETC₂-Fe²⁺-NO was found at 5 min after the spin trappers Fe²⁺/DETC were administrated, the peak concentration was at 15 min and the period with relatively stable signal intensity was at the time range from 15 to 70 min. In the ischemia-reperfused rat kidneys, the signal of DETC₂-Fe²⁺-NO was increased at 30 min of ischemia and decreased at 60 min of ischemia after the occlusion of renal artery (corresponding to the time course of 60 and 90 min after Fe²⁺/DETC injection respectively). We then investigated the EPR signal of HbNO in blood. No characteristic HbNO signal was found in the rats of the sham control and 30 min of ischemia. An HbNO signal occurred in the rats exposed to 60 min of ischemia and it became pronounced with increased duration of reperfusion. The signal intensity reached a plateau at 150 min of reperfusion. The results suggest that the DETC₂-Fe²⁺-NO signal can be only suitable for the NO measurement in the short-term ischemia-reperfusion model, whereas the HbNO signal can be applied to represent NO in the relatively long-term ischemia-reperfusion model. In addition, N^G-nitro-L-arginine (L-NAME) and allopurinol were used to identify the source of NO. By detecting the HbNO signal, we demonstrated that the activation of xanthine oxidase is an important source of NO formation at the long-term period of ischemia and reperfusion. Authors' address: Jiangang Shen, School of Chinese Medicine, University of Hong Kong, 10 Sassoon Road, Hong Kong SAR, China