A high resolution mass spectrometric measurement system for a vacuum fusion apparatus

A high resolution mass spectrometric read-out system for a vacuum fusion apparatus is described. Rapid analyses are possible and the rate at which various gases are evolved can be monitored. Gas mixture assays are accomplished by scanning the nominal mass 28 peak. Serial measurements of CO⁺, N₂⁺ and C₂H₄⁺ are made. Thus detection and measurement of evolved hydrocarbons are possible. The results for silver and tin from a conventional vacuum fusion apparatus and the mass spectrometer apparatus are compared.     

Zur Hemmung der katalytischen Jodwirkung auf das system Cer(IV)-sulfat—arsenige Säure

Zusammenfassung Die Hemmung der katalytischen Jodwirkung auf die Redoxreaktion Cer(IV)-sulfat—arsenige Säure wird hinsichtlich ihrer Vorund Nachteile bei analytischer Anwendung untersucht. Brucinacetat gibt mit Ceriion in schwefelsaurer Lösung nachFischl eine quantitativ auswertbare Farbreaktion. Kritische Untersuchungen hierzu ergeben, daß die Lösungen zur vollen Entwicklung und Stabilität der orangeroten Farbe (Absorptionsmaximum 470 nm) mindestens 10 bis höchstens 12 Min. auf 105° zu erhitzen sind. Die Anwendung auf die Jodbestimmung im Blutserum nachSpitzy, Reese undSkrube bietet infolge methodischer Komplizierung keinen besonderen Vorteil.

---

Summary The inhibition of the catalytic action of iodine on the redox-reaction ceric sulphate—arsenious acid was investigated with regard to the advantages and disadvantages in its analytical application. Brucine acetate gives, according toFischl, a quantitative colour reaction with ceric ions in sulphuric acid. Critical investigations carried out show that the solution only develops a stable, orange-red colour (absorption maximum 470 nm) between 10 and 12 minutes heating. Application of this procedure to the determination of iodine in blood serum by the method ofSpitzy, Reese, andSkrube introduces complications and has, therefore, no special advantage.

---

Résumé Etude des avantages et des inconvénients de l'emploi en chimie analytique de l'inhibition de l'effet catalytique de l'iode sur la réaction d'oxydo-réduction cerium(IV)-sulfate—acide arsenieux. Avec les ions cériques l'acétate de brucine donne, en solution sulfurique, d'aprèsFischl, une réaction colorée susceptible d'être employée pour une détermination quantitative. Des recherches critiques ont montré que les solutions devaient être chauffées pendant au moins 10 min. et au plus 12 min. à 105° pour développer complètement la couleur rouge orangé et obtenir sa stabilité (maximum d'absorption à 470 nm). L'application à la détermination de l'iode dans le sérum sanguin d'aprèsSpitzy, Reese etSkrube n'offre aucun avantage particulier du fait de la complication de la méthode.

     

Recherches sur la formation et la transformation des esters LXXIX [1]. Sur la réaction de l′isothiocyanate d′o-méthoxycarbonyl-phényle avec divers acides et l′acide sérinephosphorique

Amino acids devoid of «leaving groups» on their β carbon atom (neither ? OH: serine, nor ? SH: cysteine) react with o-methoxycarbonyl-phenyl isothiocyanate (I) in the presence of one equivalent of NaOH, in water-dioxane or in ethanol, to yield the corresponding hydroquinazolinone derivatives II which were isolated as free acids. When treated with CH₃COOH + conc. HCl the hydroquinazolinone resulting from the reaction of L -serine with I undergoes a nucleophilic attack of the carbon bearing the leaving group ? OH by a lone pair of electrons of S; this attack produces the formation of an additional thiazolidine ring, yielding the thiazoloquinazolinone derivative (?)-III. In an analogous reaction DL -serine phosphoric acid treated with I at pH 8–9 yields the corresponding substituted hydroquinazolinone which, boiled in 1N hydrochloric acid, undergoes ring closure to (±)-III by the same mechanism as the serine derivative (leaving group: ? OPO₃H₂). L -Cysteine reacted with 2 equiv. of I and then treated with CH₃COOH + conc. HCl gives two products: (?)-III produced by the same mechanism as for serine (leaving group: ? SH), and the quinazolinone derivative IV where the ? SH group is also thiocarbamoylated.     

Totalsynthese und absolute Konfiguration von natürlichem Multifloramin

The diphenol 1 was resolved into its antipodes and their absolute configuration was established. The levorotatory isomer R-(?)- 1 was oxidized to the dienone R-(?)- 6 , which was rearranged to afford natural (?)-multifloramine (R-(?)- 7 ), thus establishing that the latter has the R-configuration. By the same reaction sequences, the enantiomeric diphenol S-(+)- 1 was transformed to provide (+)-multifloramine (S-(+)- 7 ) of the S-configuration.     

Metal coordination polymers. II. Molecular weight studies of beryllium phosphinate polymers in toluene

The number-average molecular weights of beryllium 4-biphenyl(phenyl)phosphinate, di-n-pentylphosphinate, di-n-heptylphosphinate, and trifluoromethyl(phenyl)phosphinate are degraded by the presence of water in toluene. It is proposed that easily hydrolyzable P? O? P bonds contribute, in part, to the bonding of these polymers.     

A ferrocene based palladacyclic precatalyst for the Suzuki cross-coupling of aryl chlorides

Addition of palladium acetate to 2-(dicyclohexylphosphino)-phenylferrocene gave palladacycle 16 that is a very effective precatalyst for the Suzuki cross-coupling of aryl chlorides at room temperature (1 mol% 16) or 60 degrees C (> or = 0.01 mol% 16).     

New methodologies for the preparation of porphodimethenes and their conversion to trans-porphyrins with functionalized naphthyl spacers

The MacDonald [2 + 2]-type condensation of readily available 5-aryl-substituted dipyrromethanes with acenaphthenequinone leads to the trans-syn- and anti-porphodimethenes, which in turn can be converted to the alpha,alpha- and alpha,beta-porphyrin atropisomers, respectively. Treatment of the metalated or unmetalated porphodimethenes with KOH or NaOMe in THF followed by protonation with HCl results in a ring opening of the acenaphthenone and formation of the trans-8-carboxynaphthylporphyrins or their esters (NaOMe) after oxidation. Alternatively, the porphyrin formation can be accomplished by reaction of the porphodimethenes with acids in the presence of water or methanol. Reaction with NaBH(4) in a THF--methanol mixture yields the corresponding dialcohols in nearly quantitative yields. Sixteen different building blocks were prepared in order to evaluate the generality of this new synthetic approach, with Ar = 2,4,6-Me(3)C(6)H(2); 2,6-Cl(2)C(6)H(3); 2,6-F(2)C(6)H(3); 3,4-tBu(2)C(6)H(3); 3,4,5-(MeO)(3)C(6)H(2); 4-BrC(6)H(4); 4-MeC(6)H(4); and 4-MeOOCC(6)H(4) at the meso positions. The synthesized porphodimethenes and porphyrins have been fully characterized, and the X-ray structure analyses of three representative derivatives are presented.     

Syntheses of anomerically phosphodiester-linked oligomers of the repeating units of the Haemophilus influenzae types c and f capsular polysaccharides

Spacer-equipped dimers and trimers of the repeating units of the capsular polysaccharide of Haemophilus influenzae type c, -4)-3-O-Ac-beta-D-GlcpNAc-(1-->3)-alpha-D-Galp-(1-OPO(3-)-, and type f, -3)-beta-D-GalpNAc-(1-->4)-3-O-Ac-alpha-D-GalpNAc-(1-OPO(3-)-, have been synthesized for use in immunological studies. H-Phosphonate chemistry was used for the formation of the interglycosidic phosphate diester linkages. Two types of building blocks, a spacer glycoside disaccharide starting monomer (15 and 22) and an anomeric monoester alpha-H-phosphonate disaccharide elongating monomer (12 and 27), were built up for each serotype structure from properly protected monosaccharide precursors using mainly thioglycosides as glycosyl donors. Stereospecificity in the formation of the alpha-linked monoester H-phosphonate was possible in type c through crystallization of the pure alpha-anomer of the precursor hemiacetal from an alpha/beta-mixture, whereas in type f, the hemiacetal was isolated directly as exclusively the alpha-anomer. Subsequent phosphonylation using triimidazolylphosphine was performed without anomerization. Formation of the anomeric phosphate diester linkages was performed using pivaloyl chloride as coupling reagent followed by I(2)/H(2)O oxidation of the formed diester H-phosphonates. Original experiments afforded no diester product at all, but optimization of the oxidation conditions (lowering the temperature and dilution with pyridine prior to I(2) addition) gave the dimers in good yields (71% and 81%) and, subsequently, after removal of a temporary silyl protecting group in the dimers, the trimers in fair yields (36% and 37%), accompanied by hydrolysis of the dimer phosphate linkage. One-step deprotection through catalytic hydrogenolysis efficiently afforded the target dimer (30 and 36) and trimer structures (32 and 39). The synthetic scheme allows for further elongation to give higher oligomers.     

Dynamics of caged ions in glassy ionic conductors

At sufficiently high frequency and low temperature, the dielectric responses of glassy, crystalline, and molten ionic conductors all invariably exhibit nearly constant loss. This ubiquitous characteristic occurs in the short-time regime when the ions are still caged, indicating that it could be a determining factor of the mobility of the ions in conduction at longer times. An improved understanding of its origin should benefit the research of ion conducting materials for portable energy source as well as the resolution of the fundamental problem of the dynamics of ions. We perform molecular dynamics simulations of glassy lithium metasilicate (Li2SiO3) and find that the length scales of the caged Li+ ions motions are distributed according to a Levy distribution that has a long tail. These results suggest that the nearly constant loss originates from "dynamic anharmonicity" experienced by the moving but caged Li+ ions and provided by the surrounding matrix atoms executing correlated movements. The results pave the way for rigorous treatments of caged ion dynamics by nonlinear Hamiltonian dynamics.