Temporal onset-order discrimination through the tactual sense

Tactual temporal-onset order thresholds were measured for two sinusoidal vibrations of different frequencies delivered to two separate locations (thumb and index finger) of a multi-finger tactual stimulating device. The frequency delivered to the thumb was fixed at 50 Hz and that to the index finger at 250 Hz. The amplitude and duration of each of the two sinusoidal vibrations were roved independently from trial to trial in a 1-interval, 2AFC procedure. Performance, measured as a function of stimulus-onset asynchrony (SOA), indicated that the temporal-onset-order threshold averaged 34 ms across four subjects. The data were further classified into subsets according to both the amplitude and duration of the two stimuli in each trial of the roving-discrimination paradigm. The results indicated that the amplitude differences of the two stimuli in each trial had a substantial effect on onset-order discrimination, while duration differences generally had little effect. The effects of amplitude differences are explained qualitatively in terms of amplitude latency relationships and stimulus interactions such as temporal masking. Overall, the results not only contribute to an enhanced understanding of the temporal sensitivity of the tactual system but also provide guidelines for the design of tactual aids for hearing-impaired persons.     

Chemistry and electrochemistry of lithium iron phosphate

We report here several synthesis routes and their respective drawbacks/advantages for the preparation of pure LiFePO₄. We demonstrate the possibility of using LiFePO₄ for electrochemical applications, with respect that an effective carbon coating was realized onto the smallest particles. Actually, to bypass the weak ionic conductivity of lithium iron phosphate, the thinnest would be the particles; the highest would be the performance under severe electrochemical conditions.     

A mass spectrometric study on meloxicam metabolism in horses and the fungus Cunninghamella elegans,and the relevance of this microbial system as a model of drug metabolism in the horse

This paper describes a study where the metabolism of the non‐steroidal anti‐inflammatory drug meloxicam was investigated in six horses and in the filamentous fungus Cunninghamella elegans. The metabolites identified were compared between the species, and then the fungus was used to produce larger amounts of the metabolites for future use as reference material. C. elegans proved to be a good model of phase I meloxicam metabolism in horses since all four metabolites found were the same in both species. Apart from the two main metabolites, 5′‐hydroxymethylmeloxicam and 5′‐carboxymeloxicam, a second isomer of hydroxymeloxicam and dihydroxylated meloxicam were detected for the first time in horse urine and the microbial incubations. Phase II metabolites were not discovered in the C. elegans samples but hydroxymeloxicam glucuronide was detected intact in horse urine for the first time in this study. Urine from six horses was further analyzed in a semi‐quantitative sense and 5′‐hydroxymethylmeloxicam gave peaks with much higher intensity compared to the parent drug and the other metabolites, and was detected for at least 14 days after the last given dose in some of the horses. From the results presented in this article, we suggest that analytical methods developed for the detection of meloxicam in horse urine after prohibited use should focus on the 5′‐hydroxymethyl metabolite and that C. elegans can be used to produce large amounts of this metabolite for potential future use as a reference compound. Copyright © 2009 John Wiley & Sons, Ltd.     

An improved detailed chemical kinetic model for C3-C4 linear and iso-alcohols and their blends with gasoline at engine-relevant conditions

Propanol and butanol isomers have received significant research attention as promising fuel additives or neat biofuels. Robust chemical kinetic models are needed that can provide accurate and efficient predictions of combustion performance across a wide range of engine relevant conditions. This study seeks to improve the understanding of ignition and combustion behavior of pure C3-C4 linear and iso-alcohols, and their blends with gasoline at engine-relevant conditions. In this work, a kinetic model with improved thermochemistry and reaction kinetics was developed based on recent theoretical calculations of H-atom abstraction and peroxy radical reaction rates. Kinetic model validations are reported, and the current model reproduces the ignition delay times of the C3 and C4 alcohols well. Variations in reactivity over a wide range of temperatures and other operating conditions are also well predicted by the current model. Recent ignition delay time measurements from a rapid compression machine of neat iso-propanol and iso-butanol [Cheng et al., Proc. Combust Inst. (2020)] and blends with a research grade gasoline [Goldsborough et al., Proc. Combust Inst. (2020)] at elevated pressure (20–40 bar) and intermediate temperatures (780–950 K) were used to demonstrate the accuracy of the current kinetic model at conditions relevant to boosted spark-ignition engines. The effects of alcohol blending with gasoline on the autoignition behavior are discussed. The current model captures the suppression of reactivity in the low-temperature and negative-temperature-coefficient (NTC) region when either isopropanol and isobutanol are added to a research grade gasoline. Sensitivity and reaction flux analysis were performed to provide insights into the relevant fuel chemistry of the C3-C4 alcohols.     

Nanostructured nonionic thymidine nucleolipid self-assembly materials

Three nucleoside lipids have been synthesized: 3'-oleoylthymidine, 3',5'-dioleoylthymidine, and 3'-phytanoylthymidine. Differential scanning calorimetry and X-ray diffraction have been employed to characterize the physical properties of these neat lipids. Polarizing optical microscopy, small-angle X-ray scattering, and cryo-transmission electron microscopy techniques have been used to investigate the phase behavior in aqueous systems. Both oleoyl-based nucleoside lipids adopted a lamellar crystalline phase in the neat form at room temperature, and the phytanoyl derivative exhibited a fluid isotropic phase. Under excess water conditions, the presence of one branched (phytanoyl) or one unsaturated (oleoyl) chain promoted the formation of a liquid-crystalline lamellar phase at physiological temperatures. In contrast, the 3',5'-dioleoylthymidine derivative is nonswelling and does not exhibit lyotropic liquid-crystalline phase behavior. The nucleolipids' propensity for DNA-type binding and recognition has been evaluated by using a monolayer system to measure surface pressure-area isotherms in a Langmuir trough and indicates that the nucleoside base is available for nonspecific hydrogen bonding in the monolayer liquid expanded state for the single-chain nucleolipids but not for the dual-chain amphiphile.     

A Phase Field Approach for Martensitic Transformations and Crystal Plasticity

This work is motivated by cryogenic turning which allows end shape machining and simultaneously attaining a hardened surface due to deformation induced martensitic transformations. To study the process on the microscale, a multivariant phase field model for martensitic transformations in conjunction with a crystal plastic material model is introduced. The evolution of microstructure is assumed to follow a time-dependent Ginzburg-Landau equation. To solve the field equations the finite element method is used. Time integration is performed with Euler backward schemes, on the global level for the evolution equation of the phase field, and on the element level for the crystal plastic material law. (© 2014 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

A phase field approach for multivariant martensitic transformations of stable and metastable phases

A phase field model approach for multivariant martensitic transformations of stable and metastable phases is introduced. The evolution of the microstructure is examined with respect to elastic energy minimization in which one or two martensitic orientation variants are considered. In this context, the martensitic nucleation behavior is simulated for different activation barriers. Furthermore, the influence of time-dependent external loads on the formation of the different phases is studied. The numerical implementation is performed with finite elements and an implicit time integration scheme.     

Asymmetric hydrogenation of trisubstituted N-acetyl enamides derived from 2-tetralones using ruthenium-SYNPHOS catalysts: a practical synthetic approach to the preparation of β3-adrenergic agonist SR58611A

The asymmetric hydrogenation of various trisubstituted enamides derived from 2-tetralones under mild reaction conditions using Ru-SYNPHOS catalysts is reported. This practical and clean method gives access to several chiral 2-aminotetralins derivatives in high isolated yields and enantiomeric excesses up to 95% depending on the substitution pattern of the aromatic ring and the nature of the amide moiety. In addition, the usefulness of the current method is demonstrated via a practical synthetic approach to the enantiomerically pure SR58611A compound, a potent and selective β₃-adrenergic receptor agonist.     

Calculation of the HOMA model parameters for the carbon–boron bond

An extension of the harmonic oscillator model of aromaticity (HOMA) model to systems with carbon–boron bonds is presented. Model parameters were estimated using experimental and theoretical bond lengths. It is shown that both approaches produce very similar HOMA models. In the second part of the article, the aromaticity levels of several model compounds containing carbon–boron bonds are calculated using the previously obtained parameters. The results of these calculations are compared with those provided by other aromaticity indices. The aromaticity of boron-containing compounds is also compared with the aromaticity of analogous compounds containing carbon and nitrogen.