The Pocket Laboratory: The Blowpipe in Eighteenth-Century Swedish Chemistry

This article examines the role of the blowpipe in the discovery process of the disproportionately large number of new elements found by Swedish chemists during the eighteenth century and into the nineteenth. While individual chemists abroad used versions of the tool, in Sweden alone its use was ubiquitous across the chemical and mineralogical research community, and its consistently simple handheld design made basic dry chemical analysis quick, cheap, and portable. This shared use of the tool was crucial to the development of the mineral analysis projects that uncovered new substances, first by enabling the adoption of a system defining minerals by their chemical components and mineralogy by chemical analysis, and second by providing a simple and practical method for that analysis that facilitated collaboration across institutions, physical distance, and time.     

Quantifying indium with ion chromatography in hydro‐ and biohydrometallurgical leaching solutions

A methodology has been developed to chromatographically quantify indium in polymetallic (bio)hydrometallurgical processing solutions using the Dionex IonPac CS5A column and pyridine‐2,6‐dicarboxylic acid eluent. Cu(II) and In(III) could be separated by elevating the column temperature to 45°C. The comparatively low stability constant of the In‐eluent complex (log K₂ = 3.8) required typical leaching samples to be diluted in the eluent rather than acid or water to overcome ligand competition between components of the sample solution and the eluent. The methodology was applied to leachates from (bio)hydrometallurgical processing of oxidic flue dust residues and sulfidic zinc ores, where both are promising candidates for the recovery of indium from low grade ores and metallurgical wastes. Indium, ferrous iron, ferric iron, copper, zinc, nickel, and manganese concentrations could be simultaneously quantified. The method was found suitable for samples containing at least 0.25 mg/L indium and an iron to indium ratio of up to 100:1.     

Passive signal enhancement in spatially offset Raman spectroscopy

We demonstrate experimentally, for the first time, the feasibility of enhancing signals in Spatially Offset Raman Spectroscopy (SORS) using a dielectric bandpass filter, building on our earlier experimental work on the enhancement of transmission Raman signals. The method is shown to lead to the enhancement of both the surface and subsurface Raman layer signal improving the signal‐to‐noise ratio of Raman spectra from the deep areas of samples, thus enhancing the technique's sensitivity and penetration depth. The filter is placed over the laser illumination zone, on the sample surface acting as a ‘unidirectional’ mirror transmitting the collimated laser beam on one side and reflecting photons escaping from the sample back into it. This enhances the degree of coupling of laser radiation into the medium and associated generated Raman signal. The feasibility study was performed on a two‐layer sample with the second layer located at the limit of the penetration depth of the method for this sample. The sample consisted of a 2.2‐mm over‐layer of a thinned paracetamol tablet followed by a 2‐mm layer of trans‐stilbene powder. The Raman signal was collected from a spatially offset region through a hole fabricated within the filter. The experiments demonstrate the presence of an enhancement of the Raman signal from both the layers by a factor of 4.4–4.5 and the improved signal‐to‐noise ratio of sublayer signal by a factor of 2.2, in agreement with photon shot noise dominated signal. Copyright © 2008 John Wiley & Sons, Ltd.     

Interstrain Variability of Human Vaginal Lactobacillus crispatus for Metabolism of Biogenic Amines and Antimicrobial Activity against Urogenital Pathogens

Lactobacillus crispatus is the dominant species in the vagina of many women. With the potential for strains of this species to be used as a probiotic to help prevent and treat dysbiosis, we investigated isolates from vaginal swabs with Lactobacillus-dominated and a dysbiotic microbiota. A comparative genome analysis led to the identification of metabolic pathways for synthesis and degradation of three major biogenic amines in most strains. However, targeted metabolomic analysis of the production and degradation of biogenic amines showed that certain strains have either the ability to produce or to degrade these compounds. Notably, six strains produced cadaverine, one produced putrescine, and two produced tyramine. These biogenic amines are known to raise vaginal pH, cause malodour, and make the environment more favourable to vaginal pathogens. In vitro experiments confirmed that strains isolated from women with a dysbiotic vaginal microbiota have higher antimicrobial effects against the common urogenital pathogens Escherichia coli and Enterococcus faecium. The results indicate that not all L. crispatus vaginal strains appear suitable for probiotic application and the basis for selection should not be only the overall composition of the vaginal microbiota of the host from which they came, but specific biochemical and genetic traits.     

Rational Topological Design for Fluorescence Enhancement upon Aggregation of Distyrylfuran Derivatives

A series of 2,5‐distyrylfuran derivatives bearing pentafluorophenyl‐ and cyanovinyl units have been synthesized for aggregation‐induced emission (AIE). The effect of the type and extent of the supramolecular connections on the AIE of the furan derivatives were examined and correlated with their X‐ray crystal structures. It was found that the simultaneous presence of cyano and perfluorophenyl units strongly enhances the fluorescence upon aggregation. Single‐crystal X‐ray diffraction analysis confirmed that C?H???F, F???F, C?H???nitrile, Ar???Ar_F (Ar=aryl, Ar_F=fluoroaryl), and nitrile???Ar_F intra‐ and intermolecular interactions drive the topology of the molecule and that solid‐state supramolecular contacts favor AIE of the furan derivatives.     

Ethynylation of Cysteine Residues: From Peptides to Proteins in Vitro and in Living Cells

Current approaches to introduce terminal alkynes for bioorthogonal reactions into biomolecules still present limitations in terms of either reactivity, selectivity, or adduct stability. We present a method for the ethynylation of cysteine residues based on the use of ethynylbenziodoxolone (EBX) reagents. The acetylene group is directly introduced onto the thiol group of cysteine and can be used for copper‐catalyzed alkyne‐azide cycloaddition (CuAAC) without further processing. Labeling proceeded with reaction rates comparable to or higher than the most often used iodoacetamide on peptides or maleimide on the antibody trastuzumab, and high cysteine selectivity was observed. The reagents were also used in living cells for cysteine proteomic profiling and displayed improved coverage of the cysteinome compared to previously reported iodoacetamide or hypervalent iodine reagents. Fine‐tuning of the EBX reagents allows optimization of their reactivity and physical properties.     

Heterocycle/Heteroallene Ring-Opening Copolymerization: Selective Catalysis Delivering Alternating Copolymers

Heteroatom-containing polymers have strong potential as sustainable replacements for petrochemicals, show controllable monomer–polymer equilibria and properties spanning plastics, elastomers, fibres, resins, foams, coatings, adhesives, and self-assembled nanostructures. Their current and future applications span packaging, house-hold goods, clothing, automotive components, electronics, optical materials, sensors, and medical products. An interesting route to these polymers is the catalysed ring-opening copolymerisation (ROCOP) of heterocycles and heteroallenes. It is a living polymerization, occurs with high atom economy, and creates precise, new polymer structures inaccessible by traditional methods. In the last decade there has been a renaissance in research and increasing examples of commercial products made using ROCOP. It is better known in the production of polycarbonates and polyesters, but is also a powerful route to make N-, S-, and other heteroatom-containing polymers, including polyamides, polycarbamates, and polythioesters. This Review presents an overview of the different catalysts, monomer combinations, and polymer classes that can be accessed by heterocycle/heteroallene ROCOP.     

Polymerization kinetic pathways of epoxidized linseed oil with aliphatic bio-based dicarboxylic acids

The curing of epoxidized linseed oil (ELO) with three different bio-based dicarboxylic acids (sebacic acid, suberic acid, and succinic acid) has been investigated. No accelerators or catalysts were used and the resulting thermosets are 100% bio-based. Structural investigations of the three crosslinked ELO resins were made using FTIR spectroscopy and TMA, that is, tensile tests, TGA, and DMA. As evidenced by FTIR measurements ELO and dicarboxylic acids reacts but no major differences can be distinguished between the dicarboxylic acids. Non-isothermal curing has been conducted by rheological and DSC measurements. Advanced isoconversional analysis applied to DSC data in association with the complex viscosity variations gives new insights into the polymerization mechanism. The length of dicarboxylic acid carbon chain modifies the reaction rate. Then, a correlation between reaction rate, activation energy, pre-exponential factors, polymerization mechanism, and change in rate-limiting step was shown. DMA and tensile tests highlight the relationship between the carbon chain length, reactivity, and thermomechanical properties. The use of succinic acid allows reaching a higher T_g and thermal stability.