High electron mobility in solution-cast and vapor-deposited phenacyl-quaterthiophene-based field-effect transistors: toward N-type polythiophenes

New carbonyl-functionalized quaterthiophenes, 5,5' '-diperfluorophenylcarbonyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DFCO-4T], 5,5' '-diphenyl-2,2':5',2' ':5' ',2' '-quaterthiophene [DPCO-4T], and a polymer having the same basic motif as DFCO-4T, poly{1,4-bis[(3'-n-octyl-2,2'-dithiophene)carbonyl]-2,3,5,6-tetrafluorobenzene} [P(COFCO-4T)], have been synthesized, characterized, and the crystal structures of the molecules determined. Field-effect transistors fabricated with vapor-deposited and solution-cast films of DFCO-4T exhibit very high Ion:Ioff current ratios (up to 108) and electron mobilities up to approximately 0.51 and approximately 0.25 cm2.V-1.s-1, respectively. Solution-cast blends of P(COFCO-4T) and DFCO-4T (1:1 weight ratio) exhibit an electron mobility of approximately 0.01 cm2.V-1.s-1 (Ion:Ioff = 104).     

Chemistry and electrochemistry of lithium iron phosphate

We report here several synthesis routes and their respective drawbacks/advantages for the preparation of pure LiFePO₄. We demonstrate the possibility of using LiFePO₄ for electrochemical applications, with respect that an effective carbon coating was realized onto the smallest particles. Actually, to bypass the weak ionic conductivity of lithium iron phosphate, the thinnest would be the particles; the highest would be the performance under severe electrochemical conditions.     

A mass spectrometric study on meloxicam metabolism in horses and the fungus Cunninghamella elegans,and the relevance of this microbial system as a model of drug metabolism in the horse

This paper describes a study where the metabolism of the non‐steroidal anti‐inflammatory drug meloxicam was investigated in six horses and in the filamentous fungus Cunninghamella elegans. The metabolites identified were compared between the species, and then the fungus was used to produce larger amounts of the metabolites for future use as reference material. C. elegans proved to be a good model of phase I meloxicam metabolism in horses since all four metabolites found were the same in both species. Apart from the two main metabolites, 5′‐hydroxymethylmeloxicam and 5′‐carboxymeloxicam, a second isomer of hydroxymeloxicam and dihydroxylated meloxicam were detected for the first time in horse urine and the microbial incubations. Phase II metabolites were not discovered in the C. elegans samples but hydroxymeloxicam glucuronide was detected intact in horse urine for the first time in this study. Urine from six horses was further analyzed in a semi‐quantitative sense and 5′‐hydroxymethylmeloxicam gave peaks with much higher intensity compared to the parent drug and the other metabolites, and was detected for at least 14 days after the last given dose in some of the horses. From the results presented in this article, we suggest that analytical methods developed for the detection of meloxicam in horse urine after prohibited use should focus on the 5′‐hydroxymethyl metabolite and that C. elegans can be used to produce large amounts of this metabolite for potential future use as a reference compound. Copyright © 2009 John Wiley & Sons, Ltd.     

An improved detailed chemical kinetic model for C3-C4 linear and iso-alcohols and their blends with gasoline at engine-relevant conditions

Propanol and butanol isomers have received significant research attention as promising fuel additives or neat biofuels. Robust chemical kinetic models are needed that can provide accurate and efficient predictions of combustion performance across a wide range of engine relevant conditions. This study seeks to improve the understanding of ignition and combustion behavior of pure C3-C4 linear and iso-alcohols, and their blends with gasoline at engine-relevant conditions. In this work, a kinetic model with improved thermochemistry and reaction kinetics was developed based on recent theoretical calculations of H-atom abstraction and peroxy radical reaction rates. Kinetic model validations are reported, and the current model reproduces the ignition delay times of the C3 and C4 alcohols well. Variations in reactivity over a wide range of temperatures and other operating conditions are also well predicted by the current model. Recent ignition delay time measurements from a rapid compression machine of neat iso-propanol and iso-butanol [Cheng et al., Proc. Combust Inst. (2020)] and blends with a research grade gasoline [Goldsborough et al., Proc. Combust Inst. (2020)] at elevated pressure (20–40 bar) and intermediate temperatures (780–950 K) were used to demonstrate the accuracy of the current kinetic model at conditions relevant to boosted spark-ignition engines. The effects of alcohol blending with gasoline on the autoignition behavior are discussed. The current model captures the suppression of reactivity in the low-temperature and negative-temperature-coefficient (NTC) region when either isopropanol and isobutanol are added to a research grade gasoline. Sensitivity and reaction flux analysis were performed to provide insights into the relevant fuel chemistry of the C3-C4 alcohols.     

Nanostructured nonionic thymidine nucleolipid self-assembly materials

Three nucleoside lipids have been synthesized: 3'-oleoylthymidine, 3',5'-dioleoylthymidine, and 3'-phytanoylthymidine. Differential scanning calorimetry and X-ray diffraction have been employed to characterize the physical properties of these neat lipids. Polarizing optical microscopy, small-angle X-ray scattering, and cryo-transmission electron microscopy techniques have been used to investigate the phase behavior in aqueous systems. Both oleoyl-based nucleoside lipids adopted a lamellar crystalline phase in the neat form at room temperature, and the phytanoyl derivative exhibited a fluid isotropic phase. Under excess water conditions, the presence of one branched (phytanoyl) or one unsaturated (oleoyl) chain promoted the formation of a liquid-crystalline lamellar phase at physiological temperatures. In contrast, the 3',5'-dioleoylthymidine derivative is nonswelling and does not exhibit lyotropic liquid-crystalline phase behavior. The nucleolipids' propensity for DNA-type binding and recognition has been evaluated by using a monolayer system to measure surface pressure-area isotherms in a Langmuir trough and indicates that the nucleoside base is available for nonspecific hydrogen bonding in the monolayer liquid expanded state for the single-chain nucleolipids but not for the dual-chain amphiphile.     

Heterocycle/Heteroallene Ring-Opening Copolymerization: Selective Catalysis Delivering Alternating Copolymers

Heteroatom-containing polymers have strong potential as sustainable replacements for petrochemicals, show controllable monomer–polymer equilibria and properties spanning plastics, elastomers, fibres, resins, foams, coatings, adhesives, and self-assembled nanostructures. Their current and future applications span packaging, house-hold goods, clothing, automotive components, electronics, optical materials, sensors, and medical products. An interesting route to these polymers is the catalysed ring-opening copolymerisation (ROCOP) of heterocycles and heteroallenes. It is a living polymerization, occurs with high atom economy, and creates precise, new polymer structures inaccessible by traditional methods. In the last decade there has been a renaissance in research and increasing examples of commercial products made using ROCOP. It is better known in the production of polycarbonates and polyesters, but is also a powerful route to make N-, S-, and other heteroatom-containing polymers, including polyamides, polycarbamates, and polythioesters. This Review presents an overview of the different catalysts, monomer combinations, and polymer classes that can be accessed by heterocycle/heteroallene ROCOP.     

Another class of balanced graph designs: balanced circuit designs

A block considered as a set of elements together with its adjacency matrix A is called a C-block if A is the adjacency matrix of a circuit. A balanced circuit design with parameters v, b, r, k, λ (briefly, BCD(v, k, λ)) is an arrangement of v elements into bC-blocks such that each C-block contains k elements, each element occurs in exactly rC-blocks and any two distinct elements are linked in exactly λ C-blocks.We investigate conditions for the existence of BCD and show, in particular, that if the block-size k ? 6 and the trivial necessary conditions are satisfied, then the corresponding BCD exists.     

Structure resolution of Ba5Al3F19 and investigation of fluorine ion dynamics by synchrotron powder diffraction, variable-temperature solid-state NMR, and quantum computations

The room temperature structure of Ba(5)Al(3)F(19) has been solved using electron microscopy and synchrotron powder diffraction data. One-dimensional (1D) (27)Al and ultrafast magic-angle-spinning (MAS) (19)F NMR spectra have been recorded and are in agreement with the proposed structural model for Ba(5)Al(3)F(19). The (19)F isotropic chemical shift and (27)Al quadrupolar parameters have been calculated using the CASTEP code from the experimental and density functional theory geometry-optimized structures. After optimization, the calculated NMR parameters of both the (19)F and (27)Al nuclei show improved consistency with the experimental values, demonstrating that the geometry optimization step is necessary to obtain more accurate and reliable structural data. This also enables a complete and unambiguous assignment of the (19)F MAS NMR spectrum of Ba(5)Al(3)F(19). Variable-temperature 1D MAS (19)F NMR experiments have been carried out, showing the occurrence of fluorine ion mobility. Complementary insights were obtained from both two-dimensional (2D) exchange and 2D double-quantum dipolar recoupling NMR experiments, and a detailed analysis of the anionic motion in Ba(5)Al(3)F(19) is proposed, including the distinction between reorientational processes and chemical exchange involving bond breaking and re-formation.     

Nonionic diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains: thermotropic and lyotropic liquid crystalline phase behaviour

The thermotropic and lyotropic liquid crystalline phase behaviour of a series of diethanolamide amphiphiles with isoprenoid-type hydrocarbon chains (geranoyl, H-farnesoyl, and phytanoyl) has been investigated. When neat, both H-farnesoyl and phytanoyl diethanolamide form a smectic liquid crystalline structure at sub-zero temperatures. In addition, all three diethanolamides exhibit a glass transition temperature at around -73 °C. Geranoyl diethanolamide forms a lamellar crystalline phase with a lattice parameter of 17.4 ? following long term storage accompanied by the loss of the glass transition. In the presence of water, H-farnesoyl and phytanoyl diethanolamide form lyotropic liquid crystalline phases, whilst geranoyl diethanolamide forms an L(2) phase. H-farnesoyl diethanolamide forms a fluid lamellar phase (L(α)) at room temperature and up to ～ 40 °C. Phytanoyl diethanolamide displays a rich mesomorphism forming the inverse diamond (Q(II)(D)) and gyroid (Q(II)(G)) bicontinuous cubic phases in addition to an L(α) phase.