Monitoring of safety features,fissile material accumulation and concentration in nuclear reprocessing by active and passive neutron counting techniques

The application, the advantage and limits of neutron monitoring techniques, such as Hf-monitors, fissile material accumulation and concentration monitors are being discussed. The active neutron counting technique applied to emptied pulsed extraction columns containing Hf-sieve plates allows conclusive answers as to the position of the plates in the columns. Pu-accumulations on Hf-sieve plates in pulsed extraction columns can be estimated within a factor of two, whereby the detection limit is about equal to or less than 1 g Pu/plate. Fissile material concentration changes of 1.1 g/l can be detected in the case of²³⁵U in solution and of 0.4 Pu/l if a²³⁹Pu/²⁴⁰Pu ratio of 4 to 1 is assumed.     

On the evaluation of the nonisothermal kinetic parameters of (GeS2)0.3(Sb2S3)0.7 crystallization using the IKP method

The isoconversional method suggested by Friedman and the invariant kinetic parameters method (IKP) were used in order to examine the kinetics of the nonisothermal crystallization of (GeS₂)_0.3(Sb₂S₃)_0.7. The objective of the paper is to show the usefulness of the IKP method both for determining the activation parameters as well as the model of the investigated process. It was shown that the kinetic triplet [(E, A, f(α), where E is the activation energy, A is the preexponential factor, and f(α) is the differential function of conversion], which results through the application of the IKP method, depends on the set of kinetic models considered. For different sets of kinetic models, proportional values of f(α) are obtained. A criterion for the selection of this set, the use of which lead to the true kinetic triplet corresponding to the analyzed process (E = 163.2 kJ mol^?1; A = 2.47 × 10¹² min^?1 and the Avrami‐Erofeev model, A_m, for m = 2.5–2.6 was suggested. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 309–315, 2004     

Bounded imaginary powers of differential operators on manifolds with conical singularities

 We study the minimal and maximal closed extension of a differential operator A on a manifold B with conical singularities, when A acts as an unbounded operator on weighted L _p -spaces over B, 1<p<∞. Under suitable ellipticity assumptions we can define a family of complex powers A ^z , zℂ. We also obtain sufficient information on the resolvent of A to show the boundedness of the purely imaginary powers. Examples concern unique solvability and maximal regularity for the solution of the Cauchy problem for the Laplacian on conical manifolds as well as certain quasilinear diffusion equations. Received: 12 June 2001; in final form: 3 June 2002 / Published online: 1 April 2003 Mathematics Subject Classification (2000): 35J70, 47A10, 35K57     

Complex morphology of melt-spun nylon-6 fibres investigated by 1H double-quantum-filtered NMR spin-diffusion experiments.

The complex morphology of high-speed melt-spun nylon-6 fibres hydrated with D2O was investigated using 1H double-quantum-filtered spin-diffusion NMR experiments. The magnetisation exchange from selected crystalline domains along the fibrils and interfibrils was simulated with the help of a three-dimensional solution of a spin-diffusion equation approximated by a product of one-dimensional analytical NMR signals, which correspond to a lamellar morphology. This allows to measure the sizes of crystalline and less-mobile amorphous domains along the fibrils, as well as the diameter of the fibrils and interfibril distances. A series of nylon-6 fibres with extreme values of winding speed and draw ratio was investigated. The changes detected in the domain size along the fibrils and interfibrils show the same trend in the data obtained from wide-angle X-ray diffraction and small-angle X-ray scattering.     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

Thickness dependence of free‐standing thin films

Below a critical thickness, of about 60 nm, the glass transition temperature of polystyrene (PS) films decreases with film thickness, as demonstrated using free‐standing films. A geometrical model is developed here describing this phenomenon in the case of ideal (Gaussian) chains. This model, which can be considered as an application of the free volume model, assumes that the decrease of the glass transition temperature from thick to ultrathin films is due to the modification of the interpenetration between neighboring chains. The theoretical curve deduced from the model is in excellent agreement with the PS experimental results, without using any adjustable parameters. From these results, it can be concluded that new chain motions, usually buried in bulk samples, are expressed by the presence of the surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 10–17, 2007     

Fluorine incorporation in silica glass by the MCVD process: Study of fluorine incorporation zone,evaluation of optical properties and structure of the glass

A theoretical approach was made to find out a complete fluorine incorporation zone on a ternary diagram which serves as a useful graphical representation to select the flows of the supplied reagents for incorporation of the suitable amount of fluorine into cladding glass of optical fiber preform made by the MCVD process using CCl₂F₂ as a source of fluorine under oxygen abundance, oxygen deficiency and intermediate oxygen state conditions. The possible mechanism for incorporation of fluorine into cladding glass of optical fiber is also evaluated on the basis of the thermodynamical data. The fluorine incorporation mechanism in silica glass by the MCVD process is found to be dependent on the CCl₂F₂/SiCl₄ ratio in the input gas mixture. Fluorine doping is found to be effective for removing the strained Si–O–Si bonds, which govern the optical transparency in deep ultra-violet (DUV) and vacuum ultra-violet (VUV) regions. The maximum refractive index depression of ?0.5 × 10^?3 is obtained with incorporation of fluorine into silica cladding glass by the MCVD process using CCl₂F₂ as a dopant precursor with suitable flow of SiCl₄ vapor along with O₂ through backward deposition pass. The structure of fluorine doped silica glass preform samples containing 1.70–1.79 mol% fluorine incorporated by the MCVD process based on the analyses of ¹⁹F MAS spectra done by high-resolution ¹⁹F NMR spectroscopy reveal the presence of two distinct types of fluorine environments. The majority of the fluorine environments are formed in SiO_1.5F polyhedral and less abundant species is observed to be highly unusual, yielding a fivefold coordinated silicon of the type SiO₂F polyhedral which become increased with increasing the fluorine content.     

Circular dichroism spectra of langasite family crystals in the range of electronic transitions of structure defects

The absorption and circular dichroism spectra of langasite family crystals are studied. Wide bands in the range of 285–500 nm that are related to the structure lattice defects are found. For all the crystals, these bands are in approximately the same spectral region, have identical structures, and can be attributed to one type of defects formed by cation vacancies and excess oxygen atoms in the optically active positions.     

Specific features of the formation of submicron inclusion in Ti:sapphire

Specific features of the formation of submicron (70–300 nm) inclusions in Ti:sapphire (Al₂O₃:Ti) grown in a carbon-containing medium have been investigated. These inclusions are caused by deviation from the melt stoichiometry and are formed during the melt-crystal phase transition. These defects are submicropores containing excess aluminum and its suboxides; they can be destroyed by thermal loading of a crystal.