A simplified assay of furosemide in plasma and urine by high-pressure liquid chromatography.

A simplified high-pressure liquid chromatograhic method for determination of furosemide in plasma and urine has been developed using a fluorometric detector directly coupled to the column effluent. The method includes an ether extraction from acidified biologic samples. The mobile phase used for chromatography on a reversed-phase column (C15 hydrocarbon permanently bonded to silica particles) is sufficiently acidic to induce fluorescence of furosemide. The methylester of furosemide is employed as an internal standard. The sensitivity is 0.1 and 0.25 microgram per ml plasma and urine, respectively. The applicability to pharmacokinetic studies of furosemide is shown.     

A practical approach to transferring linear gradient elution methods

Attempts to theoretically address the problems involved in transferring linear gradient elution methods have been somewhat ad hoc due to the simplifying assumptions usually made in conventional gradient elution theory. Until now, all equations based on the k* parameter of linear gradient elution theory used as the basis for predicting the separation selectivity have not explicitly included the effect of the dwell volume (VD). Using an exact equation for predicting k*, that is, one which fully accounts in an a priori fashion for VD, we find a set of simple yet exact equations which unequivocally must be satisfied to transfer an optimized linear gradient elution method from one system (column or instrument or both) to another. These relationships absolutely mandate that a change in the instrument dwell volume requires a proportional change in the column volume; in turn, a change in the column volume requires a proportional change in the flow rate and/or gradient time to maintain a constant gradient steepness. Although we are not the first to suggest these guidelines, this work provides a complete theoretical foundation for these exact guidelines for the maintenance of gradient selectivity for the case of transferring a linear gradient elution method between different columns packed with the same particles and/or between different instruments.     

Determination of the fragmentation mechanisms of organophosphorus ions by H2O and D2O atmospheric-pressure ionization tandem mass spectrometry

Dimethylmethyl phosphonate (DMMP), dimethyl phosphite (DMPI), trimethyl phosphite (TMPI) and trimethyl phosphate (TMP) were investigated using H₂O and D₂O atmospheric-pressure ionization (API) tandem mass Spectrometry. All daughter ions could be explained by losses of one or a successive number of stable molecules as opposed to losses of radicals such as the hydride, methyl and methoxy species. Losses of neutral methanol and dimethyl ether and of protonated methanol and formaldehyde ions from all four organophosphorus pseudo-molecular ions were observed. The DMMP and DMPI MH⁺ pseudomolecular ions produced the losses of neutral C₂H₆ and water, respectively. Formaldehyde loss was not observed for the MH⁺ ions, but it was well represented in the decomposition pathways of daughter ions. The D₂O reagent gas highlighted the role of the ionizing proton/ deuteron in the various daughter ions, including m/z 95, 79, 65, 49, 33, 31 and 47. The last ion was found to be isobaric in that m/z 47 and 48 both appeared with similar abundances in the D₂O-API daughter ion mass spectra of TMPI and TMP.     

The synthesis and chemistry of some bis-aziridinylketones and their spectral study

The synthesis and spectral characteristics of certain bis(1-alkyl-3-phenyl-2-aziridinyl)ketones are reported. The reactions of 1,2,4,5-tetrabromo-1,5-diphenyl-3-pentanone ( 2 ) with primary amines are assumed to have a mechanism similar to that of a simple dibromo-ketone. The so-called cis, cis- or trans, trans-configurations of the bis-aziridinylketones were determined by ¹H and ¹³C nmr spectra.     

Separation of Trp-Arg and Arg-Trp using G-quartet-forming DNA oligonucleotides in open-tubular capillary electrochromatography

DNA oligonucleotides that form intramolecular G-quartet structures were investigated as stationary phase reagents for separation of mixtures of the isomeric dipeptides Trp-Arg and Arg-Trp in open-tubular capillary electrochromatography (OTCEC). The oligonucleotides included a thrombin-binding aptamer that forms a biplanar G-quartet structure and an oligonucleotide that forms a 4-plane G-quartet structure. Fluorescence, circular dichroism and UV-visible absorbance spectroscopies were used in batch solution studies to indicate interactions between the dipeptides and the biplanar G-quartet structure. Results for OTCEC separations were compared with results obtained for capillary zone electrophoresis separations on a bare capillary. Temperature studies suggest that resolution is improved when the G-quartet structure is partially destabilized, but control experiments in which potassium chloride was not included in the mobile phase indicate that the G-quartet structure nevertheless plays a role in the separations.     

Surface characterization of Pt electrodes using underpotential deposition of H and Cu: Part I. Pt(100)

This paper is the first in a series describing the in situ surface characterization of platinum electrodes using H and Cu deposited at underpotentials. The surface of a Pt(100) electrode pretreated by simple flame annealing and quenching in aqueous sulfuric acid is shown to contain a high concentration of defects such as vacancies and self-adsorbed Pt atoms. Adsorbed hydrogen is more strongly bound at these defects than on a uniform Pt(100) surface. Potential cycling in 1 M HCl produces a higher concentration of defects, while oxide formation and reduction in 0.5 M H₂SO₄ has the opposite effect. The nature of (100)-like sites at a polycrystalline platinum electrode is also discussed.     

Solvent extraction and lanthanide complexation studies with new terdentate ligands containing two 1,3,5-triazine moieties

The extracting agent 2,6-bis(4,6-di-pivaloylamino-1,3,5-triazin-2-yl)-pyridine (L(5)) in n-octanol was found, in synergy with 2-bromodecanoic acid, to give D(Am)/D(Eu) separation factors (SFs) between 2.4 and 3.7 when used to extract the metal ions from 0.02-0.12 M HNO(3). Slightly higher SFs (4-6) were obtained in the absence of the synergist when the ligand was used to extract Am(III) and Eu(III) from 0.98 M HNO(3). In order to investigate the possible nature of the extracted species crystal structures of L(5) and the complex formed between Yb(III) with 2,6-bis(4,6-di-amino-1,3,5-triazin-2-yl)-pyridine (L(4)) were also determined. The structure of L(5) shows 3 methanol solvent molecules all of which form 2 or 3 hydrogen bonds with triazine nitrogen atoms, amide nitrogen or oxygen atoms, or pyridine nitrogen atoms. However, L(5) is relatively unstable in metal complexation reactions and loses amide groups to form the parent tetramine L(4). The crystal structure of Yb(L(4))(NO(3))(3) shows ytterbium in a 9-coordinate environment being bonded to three donor atoms of the ligand and three bidentate nitrate ions. The solvent extraction properties of L(4) and L(5) are far inferior to those found for the 2,6-bis-(1,2,4-triazin-3-yl)-pyridines (L(1)) which have SF values of ca. 140 and theoretical calculations have been made to compare the electronic properties of the ligands. The electronic charge distribution in L(4) and L(5) is similar to that found in other terdentate ligands such as terpyridine which have equally poor extraction properties and suggests that the unique properties of L(1) evolve from the presence of two adjacent nitrogen atoms in the triazine rings.     

The predictive accuracy for estimating infinite dilution activity coefficients by γ∞-based UNIFAC

The predictive accuracy for estimating infinite dilution activity coefficients by a modification of the UNIFAC method wherein the group interaction parameters were based on only data (referred to as -based UNIFAC) has been studied. Estimates and measured values were compared for six prototypical solutes in a series of homologous n-alkanes, l-alcohols and alkanenitrile solvents. Despite the fact that the interaction parameters were derived using only data, this approach still gave serious errors due to several inherent problems in the original UNIFAC model. Its performance is sometimes even poorer than that of the original UNIFAC method. For example for nitromethane in alcohols and p-dioxane in nitriles values predicted by the -based UNIFAC are essentially zero. The large errors for these systems are most likely due to inaccurate interaction parameters in the -based UNIFAC method.     

The simultaneous saccharification and fermentation of pretreated woody crops to ethanol

Four promising woody crops (Populusmaximowiczii x nigra (NE388), P.trichocarpa x deltoides (Nll), P.tremuloides, and SweetgumLiquidambar styraciflua) were pretreated by dilute sulfuric acid and evaluated in the simultaneous saccharification and fermentation (SSF) process for ethanol production. The yeastSaccharomyces cerevisiae was used in the fermentations alone, and in mixed cultures with β -glucosidase producingBrettanomyces dausenii. Commercial Genencor 150L cellulase enyme was either employed alone or supplemented with β- glucosidase. All SSFs were run at 37 …C for 8 d and compared to saccharifications at 45…C under the same enzyme loadings.S. cerevisiae alone achieved the highest ethanol yields and rates of hydrolysis at the higher enzyme loadings, whereas the mixed culture performed better at the lower enzyme loadings without β -glucosidase supplementation. The best overall rates of fermentation (3 d) and final theoretical ethanol yields (86–90%) were achieved with P.maximowiczii x nigra (NE388) and SweetgumLiquidambar styraciflua, followed by P.tremuloides and P.trichocarpa xdeltoides (N1l) with slightly slower rates and lower yields. Although there were some differences in SSF performance, all these pretreated woody crops show promise as substrates for ethanol production.     

The synthesis and thermal curing parameters of a novel quinoxaline monomer with terminal ethynyl thermoset and phenylethynyl intramolecular cycloaddition postcure capability

The Synthesis of 3,3′-bis(4-[3-ethynylphenoxy]phenyl)-7,7′-bis(phenylethynyl)-2,2′-diphenyl-6,6′-biquinoxaline (I) was accomplished by the reaction of 2,2′-bis(phenylethynyl)-5,5′-diaminobenzidine (II) and 4-(3-ethynylphenoxy)benzil. Thermal analysis of I indicated a softening temperature of 107°C, followed by an exotherm above 150°C that corresponded to a independent crosslinking reaction of the terminal acetylene groups and an intramolecular cycloaddition (IMC) reaction of the 2,2′-bis(phenylethynyl)biphenyl moieties. In the synthetic work substantial improvements were made in the synthesis of II. The sample of I was cured at 200°C and the maximum partially cured transition temperature attained was 280°C. A sample of 3,3′-bis(4,[3-ethynylphenoxy]phenyl)-2,2′-diphenyl-6,6′-biquinoxaline (IV) was similarly tested as a model without IMC capability and its corresponding value was 250°C. The difference between these two values is discussed briefly.