Delayed Fluorescent Emission from Pyrene Doped Phenanthrene Nanoparticles Based on Triplet-triplet Energy Transfer

Doped nanoparticles were prepared from pyrene and phenanthrene using a facile reprecipitation method. The doped nanoparticles presented unique delayed fluorescent emissions of pyrene under the unprotected condition. The ratio of the intensity of delayed fluorescence (I_DF) to that of phosphorescence (I_P) is about 4:1, which almost keeps unchanged with the decrease of pyrene content at room temperature. The intensity of the delayed fluorescence emissions is dependent on the relative content of pyrene, as well as the aggregation degree of nanoparticles. The delayed emissions are contributed to efficient triplet‐triplet energy transfer from phenanthrene (donor) to pyrene (acceptor). Steady fluorescence measurement have proved that the singlet‐singlet energy transfer process was also existent dominated by the radiation energy transfer mechanism.     

在氧化铈表面掺铝以显著提高其抛光光学玻璃的抛蚀量

将水合碳酸铈与硝酸铝和氨水共同进行机械球磨,使新形成的无定型氢氧化铝包覆在细小的碳酸铈颗粒表面,经脱水干燥和煅烧,以制备出表面掺杂有氧化铝的氧化铈。结果表明:球磨中间产物仍然以水合碳酸铈为主,氢氧化铝的形成阻碍了碳酸铈的无定型化和向氢氧化铈的转化过程。在氧化铝掺杂量不超过10%的条件下,煅烧产物均具有立方萤石型结构。所有掺杂铝的氧化铈粉体对ZF7和K9光学玻璃的抛光速率均比纯氧化铈的有很大提高,证明铝的掺杂能够大大提高氧化铈的抛光性能。其最佳掺杂量为0.6%,煅烧条件为在1000℃下煅烧2 h。此时的MRR值为纯氧化铈的两倍以上。     

NdFeB材料微波吸收特性的研究

采用高能球磨和晶化热处理方法制备钕铁硼吸波粉体,研究制备工艺对钕铁硼粉体吸波性能的影响。结果发现:高能球磨和适当晶化热处理可改善NdFeB粉体的组织结构、复介电常数和复磁导率;NdFeB粉体的反射率最小值为-15.5 dB,高能球磨48 h后粉体的反射率最小值降到-23 dB,高能球磨粉体经600℃晶化热处理后反射率最小值为-19 dB;高能球磨和晶化热处理可降低NdFeB粉体的吸收峰频率;高能球磨会使NdFeB粉体的吸波带宽变窄,经600℃晶化热处理后吸波带宽变宽,并且随着晶化热处理的温度升高,吸波带宽变得更宽。     

Synthesis and Characterizations of Ferrocenyl Carbonyl Chromium and Cobalt Clusters

Two novel bimetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅)–C≡C–C₆H₄–Fc] (Fc = C₅H₅FeC₅H₄] (1) and [Cr(CO)₃(η ⁶-C₆H₅)–C ≡ C–Fc–C(CH₃)₂–Fc] (3), were synthesized by the Sonogashira coupling reaction. By using of (1) and (3) as ligands to react with Co₂(CO)₈, two others novel polymetallic complexes, [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}–C₆H₄–Fc] (2) and [Cr(CO)₃(η ⁶-C₆H₅){Co₂(CO)₆-η ²-μ ²-C≡C–}Fc–C(CH₃)₂–Fc] (4) were obtained. Four carbonyl complexes were characterized by elemental analysis, FT-IR, NMR and MS. The molecular structures of complexes (1), (2) and (4) were determined by single crystal X-ray diffraction. The interactions among the ferrocenyl, Cr(CO)₃ and Co₂(CO)₆-η ²-μ ²-C≡C– units were investigated by cyclic voltammetry.     

Measurement of neutron-induced activation cross sections of lanthanum at 14.8 MeV

Cross-sections for (n,p), (n,α), (n,n′α), (n,t) and (n,2p) reactions have been measured on ¹³⁹La isotope at the neutron energy 14.8 MeV using the activation technique in combination with high-resolution gamma-ray spectroscopy. Neutrons were produced via the ³H(d,n)⁴He reaction using a solid tritium–titanium target. The neutron fluences were determined using the monitor reaction ²⁷Al(n,α)²⁴Na. The neutron energy in this measurement was determined by cross section ratios for the ⁹⁰Zr(n,2n)^89m+gZr and ⁹³Nb(n,2n)^92mNb reactions. Data are reported for the following reactions: ¹³⁹La(n,p)¹³⁹Ba, ¹³⁹La(n,α)¹³⁶Cs, ¹³⁹La(n,n′α)^135mCs, ¹³⁹La (n,t)^137mBa, and ¹³⁹La(n,2p)¹³⁸Cs. The cross sections were discussed and compared with experimental data found in the literature, and with the comprehensive evaluation data in ENDF/B-VII.0, JENDL-3.3, JEFF-3.1/A, and TENDL-2008 libraries.     

Gene Cloning,Overexpression, and Characterization of the Nitrilase from <Emphasis Type="Italic">Rhodococcus rhodochrous</Emphasis> tg1-A6 in <Emphasis Type="Italic">E. coli</Emphasis>

A DNA fragment containing the entire coding sequence of nitrilase gene was amplified from Rhodococcus rhodochrous tg1-A6 with high nitrilase activity using PCR and sequenced. The open reading frame of the nitrilase gene contains 1,101 base pairs, which encodes a putative polypeptide of 366 amino acid residues. The nitrilase gene was cloned into an expression vector pET-28a and expressed in an Escherichia coli strain BL21(DE3). The enzymatic activity of nitrilase, which converts various nitriles to the corresponding carboxylic acids, was detected to reach 24.5 U/ml at 9 h in the recombinant bacteria.     

基于磷酸化修饰的核/壳硅纳米颗粒药物缓释体研究

采用反相微乳液体系中功能化基团同步修饰方法制备了包载抗肿瘤药物平阳霉素(PYM)的磷酸化核/壳硅纳米颗粒(PYM-PO4SiNP), 考察了不同量的磷酸化修饰试剂对PYM-PO4SiNP的影响. 结果表明, 随着磷酸化修饰试剂量的增加, 制备的PYM-PO4SiNP的电位逐渐降低, 其包载的PYM 的释放速率逐渐加快, 但对颗粒的粒径没有明显影响. 本文选择能使药物平稳、缓慢释放的磷酸化修饰试剂用量, 制备了稳定性好、药物缓释时间长的PYM-PO4SiNP, 其载药量和包封率分别为7.2%和37.81%, 通过与CNE-2细胞共培育后, 可以使CNE-2细胞的存活率逐渐下降, 而磷酸化核/壳硅纳米颗粒PO4SiNP载体本身是没有毒性的. 这一研究工作的开展拓宽了核/壳硅纳米颗粒在药物载体领域中的应用.     

EFFECT OF MORPHOLOGICAL STRUCTURE OF AMINOMETHYL POLYSTYRENE RESIN ON THE CATALYTIC PROPERTIES OF POLYMERSUPPORTED RUTHENIUM COMPLEXES

Polymer-supported ruthenium complexes ■-Phen-Ru-①,■-Phen-Ru-②,■-Phen-Ru-③,■-Phen-Ru-④, ■-Phen-Ru-⑤,■-Phen-Ru-⑥and ■-Phen-Ru-⑦were prepared using aminomethyl polystyrenes of different morphological structures as supports.A variety of alcohols were oxidized efficiently into the corresponding ketones, carboxylic acids or aldehydes with iodosylbenzene (PhIO) catalyzed by aminomethyl polystyrene-supported ruthenium complexes under mild reaction conditions in acetonitrile.The influences of morphological struct...     

STUDIES ON SELF-VULCANIZING FLUOROELASTOMER/PHENOL HYDROXY SILICONE RUBBER BLENDS

Self-vulcanizing blends of phenol hydroxy silicone rubber(PHSR)and fluoroelastomer(FPM)were prepared. Vulcanized rubbers with lower glass transition temperature(T_g)were successfully obtained.The results of dynamic mechanical analysis(DMA)show that the vulcanized FPM/PHSR(10 phr)blend has only one T_g temperature,demonstrating the well compatibility between FPM and PHSR.The thermogravimetric analysis(TGA)demonstrates that the PHSR do little damage to the thermal stability of FPM.The vulcanization charact...