Ge-Sb-Se硫系薄膜制备及光学特性研究

介绍了几种常见的硫系薄膜制备方法, 根据现有实验条件采用热蒸发法和磁控溅射法制备出Ge-Sb-Se三元体系硫系薄膜, 通过台阶仪测试薄膜的厚度和表面粗糙度, 计算出两种制备方法的成膜速率, 并通过X射线光电子能谱测试了两种制备方法所得薄膜与块体靶材组分的差别. 利用Z扫描技术和分光光度计测试了热蒸发法制备所得薄膜的三阶非线性性能和透过光谱, 计算出非线性折射率、非线性吸收系数和薄膜厚度等参数. 结果表明热蒸发法制备Ge-Sb-Se薄膜具有良好的物理结构和光学特性, 在集成光学器件方面很高的应用潜力.     

Effect of microstructure on thermoelectric properties of CSD-grown Bi2Sr2Co2Oy thin films

Three Bi₂Sr₂Co₂O_y thin films with different microstructures have been prepared by chemical solution deposition on LaAlO₃(001) through varying the annealing temperature. With the decrease in the annealing temperature, both the size and c-axis alignment degree of grains in the film decrease as well, leading to an increase in the film resistivity. In addition, the decrease in the annealing temperature also results in a slight increase in the seebeck coefficient due to the enhanced energy filtering effect of small-grain film. The nanostructured Bi₂Sr₂Co₂O_y film with the average grain size of about 100 nm shows a power factor comparable to that of the films with larger grains. Since the thermal conductivity of the nanostrcutured films can be depressed due to the enhanced phonon scattering by grain boundary, a higher figure of merit is expected in Bi₂Sr₂Co₂O_y thin film with grains in nanometer size.     

Energy theorems for solving equations of deflections

In this paper the unit-dummy-load method is generalized on the basis of Castigliano’s Theorem. On these grounds the general eguations of deflection surfaces of the structures, such as a kind of beams,plates and shells, are directly derived by the force method.We derived the eguations of the deflection surfaces of the rectangular thin plates and thick plates considering the effect of transverse shearing deformations with the inhomogeneous displacement boundary conditions. At the same time we give the equations of deflection axes of the corresponding straight beams.The applications of the reciprocal theorem are also generalized.Three simple calculated examples are given.     

Photoemission of graded-doping GaN photocathode

We study the photoemission process of graded-doping GaN photocathode and find that the built-in electric fields can increase the escape probability and the effective diffusion length of photo-generated electrons,which results in the enhancement of quantum efficiency.The intervalley scattering mechanism and the lattice scattering mechanism in high electric fields are also investigated.To prevent negative differential mobility from appearing,the surface doping concentration needs to be optimized,and it is calculated to be 3.19×10 17 cm 3.The graded-doping GaN photocathode with higher performance can be realized by further optimizing the doping profile.     

Mn替代对Dy2AlFe16-xMnx化合物的结构和磁性的影响

通过X射线衍射及磁测量手段研究了Dy2AlFe16-xMnx化合物的结构和磁性.研究结果表明Dy2AlFe16-xMnx化合物具有六角相的Th2Ni17型结构.对x=1,2的样品采用X射线热膨胀测定法在104-647K的温度范围内测量了其热膨胀性质,发现这些化合物在低温下存在热膨胀反常现象,在居里点附近出现负膨胀性质.对自发磁致伸缩的研究结果表明Dy2AlFe16-xMnx化合物中存在着较强的各向异性的自发磁致伸缩,随着Mn含量的增加,其低温下的自发体磁致伸缩减弱.磁测量结果表明Mn的替代导致Dy2AlFe16-xMnx化合物的居里温度及自发磁化强度急剧下降.     

真空紫外光激发下掺Pr3+铝酸盐的自陷激子对Pr3+发光的影响

研究了SrAl12 O19:Pr3+和Y3Al5O12(YAG):Pr3+在20K,77K和300K的真空紫外(VUV)光谱,二者除了表现出Pr3+特有的发射性质外,还产生了一种特殊的发射现象,即自陷激子(STE)发射,并且其随着稀土离子浓度和温度的降低而增强.还着重讨论了自陷激子对Pr3+发光的影响.     

Double-clad photonic crystal fiber coupler for compact nonlinear optical microscopy imaging

A 1 x 2 double-clad photonic crystal fiber coupler is fabricated by the fused tapered method, showing a low excess loss of 1.1 dB and a splitting ratio of 97/3 over the entire visible and near-infrared wavelength range. In addition to the property of splitting the laser power, the double-clad feature of the coupler facilitates the separation of a near-infrared single-mode beam from a visible multimode beam, which is ideal for nonlinear optical microscopy imaging. In conjunction with a gradient-index lens, this coupler is used to construct a miniaturized microscope based on two-photon fluorescence and second-harmonic generation. Three-dimensional nonlinear optical images demonstrate potential applications of the coupler to compact all-fiber and nonlinear optical microscopy and endoscopy.     

一种基于模态域波束形成的水平阵被动目标深度估计

水面水下目标分辨与识别一直是被动声呐探测领域的难题.利用一种水平阵模态域波束形成算法获得己知方位目标声源的各阶模态强度,将其与不同深度的各阶参考模态强度进行匹配,最终实现了对声源的深度估计.仿真结果表明,该算法可以在信噪比为-10 dB的情况下,用300Hz带宽的信号样本,实现对声源深度的有效估计.系统分析了不同参数和不同波导条件对该方法目标深度估计性能的影响.其中,阵元数越多,模态样本数越多,计算频段越宽,方位估计精度越高,有效阵长越长,深度估计的性能越好.阵元间距和波导深度的变化不会影响该方法的深度估计性能,并且该方法的深度估计性能在声速剖面、海底参数等波导条件存在扰动时具有鲁棒性.     

基于BiFeO_3/ITO复合膜表面钝化的黑硅太阳电池性能研究

采用金属银辅助化学刻蚀法在制绒的硅片表面刻蚀纳米孔形成微纳米双层结构,以期获得高吸收率的太阳能电池用黑硅材料.鉴于微纳米结构会在晶硅表面引入大量的载流子复合中心,利用磁控溅射技术在黑硅太阳电池表面制备了BiFeO_3/ITO复合膜,并对其表面性能和优化效果进行了探索.实验制备的具有微纳米双层结构的黑硅纳米线长约180—320 nm,在300—1000 nm波长范围内入射光反射率均在5%以下.沉积BiFeO_3/ITO复合薄膜后的黑硅太阳能电池反射率略有提高,但仍然具有较强的光吸收性能;采用BiFeO_3/ITO复合膜的黑硅太阳能电池开路电压和短路电流密度分别由最初的0.61 V和28.42 mA/cm~2提升至0.68 V和34.57 mA/cm~2,相应电池的光电转化效率由13.3%上升至16.8%.电池综合性能的改善主要是因为沉积BiFeO_3/ITO复合膜提高了电池光生载流子的有效分离,从而增强了黑硅太阳电池短波区域的光谱响应,表明具有自发极化性能的BiFeO_3薄膜对黑硅太阳能电池的表面性能可起到较好的优化作用.     

基于原位等离子体氮化及低压化学气相沉积-Si_3N_4栅介质的高性能AlGaN/GaN MIS-HEMTs器件的研究

通过对低压化学气相沉积(LPCVD)系统进行改造,实现在沉积Si_3N_4薄膜前的原位等离子体氮化处理,氮等离子体可以有效地降低器件界面处的氧含量和悬挂键,从而获得了较低的LPCVD-Si_3N_4/GaN界面态,通过这种技术制作的MIS-HEMTs器件,在扫描栅压范围V_(G-sweep)=(-30 V,+24 V)时,阈值回滞为186 mV,据我们所知为目前高扫描栅压V_(G+)(20 V)下的最好结果.动态测试表明,在400 V关态应力下,器件的导通电阻仅仅上升1.36倍(关态到开态的时间间隔为100μs).