研究堆慢正电子源构建中的关键机理问题

研究堆慢正电子源是获得高强度慢正电子束流的有效方式,国际上己建成多座装置并获得广泛应用.与常规同位素慢正电子源相比,研究堆慢正电子源的物理过程复杂,影响末端束流强度的因素众多,对其进行深入研究与合理建模是未来在中国绵阳研究堆(CMRR)上构建慢正电子源的基础.本文厘清了研究堆慢正电子产生的关键过程与物理机理,建立了预测末端正电子束流强度的理论模型,找到了影响其末端强度的主要物理量:快正电子体产生率、慢化体有效表面积、慢化体扩散距离、慢正电子从表面被提取到靶环末端的效率、及束流系统提取效率.用多种实验结果对模型进行校验,包括多个同位素慢正电子源的效率测量值,以及PULSTAR研究堆慢正电子源测量结果,充分验证了模型正确性.根据模型对各物理量的影响因素进行了分析,找到了需着重关注的影响因素,对未来源/靶结构的设计给出建议.     

基于偏振光谱BRDF图像的物质分类

提出一种基于偏振光谱二向反射分布函数图像的物质自动分类方法,该方法主要选择偏振光谱二向反射分布函数信息作为新的特征用于物质自动分类.采用支撑向量机的分类方法对不同的天气条件（晴天、多云、阴天）下处于杂乱的自然草地背景环境中的典型目标进行分类,最后比较三种不同特征选择对于分类准确度的影响.采取三种不同的特征选取方法,分别为采用单一的光谱特征、偏振光谱特征及偏振光谱二向反射分布函数特征.最后通过实验得出：将偏振光谱二向反射分布函数作为分类特征在三种不同的天气情况下,分类准确度都较高,特别是在阴天天气条件下,分类准确度明显高于其它两种特征选择.即使是在阴天低照度下的场景中,当不同目标和背景之间的灰度很接近时,采用本文方法也能准确的进行自动分类.
关键词:     

超导器件在军事和工程化方面的研究及应用进展综述(上)

对超导器件在国内外军事领域上的研究和应用进展进行了综述,分析了目前我国超导器件研制以及在武器装备上应用所面临的主要问题,提出了解决的办法,并重点介绍了中国电子科技集团公司第16所以及中电集团低温电子技术研发中心的研究成果,并提出了加快我国超导器件在武器装备上应用的建议。     

Local trimer orbital ordering in LiNiO2 studied by quantitative convergent beam electron diffraction technique

A local trimer orbital ordering model of LiNiO₂ was studied by means of theoretical calculation and experimental measurement of electron structure factors. Based on the trimer model, the electron structure factors were calculated by using the scattering factor of non-spherical Ni³⁺ ion. From these results, it is found that the effect of local orbital ordering on the electron structure factors of several subtle reflections, such as (202) and (107), is very large. The electron structure factors of these subtle reflections were measured by quantitative convergent beam electron diffraction method. The experimentally measured electron structure factor values of these reflections indicate that the trimer orbital ordering model is more close to the true structure of LiNiO₂.     

双折射器件对机载激光雷达偏振探测影响的研究

根据膜层理论给出了机载激光雷达回波信号垂直入射偏振棱镜时偏振平行分量透过率的数学解析表达式,定量分析了偏振棱镜对机载激光雷达回波信号平行分量透过率的影响,理论计算表明：棱镜晶体厚度、空气膜层厚度及棱镜结构角共同影响回波信号通过偏振棱镜的透过率;当回波信号波长为532 nm,利用1/2石英波片测得的偏振平行通道和偏振垂直通道的增益比k为1.2时,机载激光雷达偏振通道增益比k的真实值在1.003～1.463之间,若不考虑1/2波片对k值的影响,会给退偏振比反演带来较大的系统误差.     

长周期光纤光栅折射率特性仿真的新方法

基于长周期光纤光栅的模式耦合机理,提出一种快速模拟长周期光纤光栅折射率特性的方法。该方法在计算包层模式的有效折射率时分开计算,在环境折射率小于包层折射率时采用二分法和分步搜索法结合计算包层模式的有效折射率,在环境折射率大于包层折射率时采用Nelder-Mead加分步搜索法求解包层模式的有效折射率。在应用谐振波长的决定式求解与环境折射率的匹配的谐振波长时,采用变区间应用二分法求解而不是传统的逐步搜索法求解谐振波长。数值结果与实验结果做了对比,两者基本一致。实践证明,该方法方便快捷,比一般的方法速度提高7倍以上。     

Superfluidity in dense nuclear matter

We discuss the onset of superfluidity in neutron stars, where the model of nuclear matter is realized in a high-density and asymmetry state. In particular, we present the study of the effects of microscopic three-body forces on the proton pairing in the ¹ S ₀ channel and neutron pairing in ³ PF ₁ channel for β-stable neutron star matter. It is found that the main effects of three-body forces are to shrink the domain of existence of the ¹ S ₀ below the threshold of the direct URCA process and to stretch the density range of the ³ PF ₁ pairing in a broad domain so to cover most part of the neutron-star core. The text was submitted by the authors in English.     

Result of search for low velocity exotic particles

The L3＋C experiment, taking advantage of the L3 muon magnetic spectrometer, measured the spatial tracks of charged cosmic ray particles to obtain rigidity as well as velocity. One possible low velocity exotic particle is observed. The existing uncertainties are discussed, and the flux upper limit of the low velocity exotic particles from this observation is deduced based on the assumption of a null observation. The result is 6.2×10^-10 cm^-2·s^-1·sr^-1 at 90% confidence level in the velocity range from 0.04c to 0.5c.     

Experimental investigation on a software synchronous optical sampling technique based on periodically poled lithium niobate

A software synchronous optical sampling system is constructed based on sum frequency generation (SFG) in periodically poled lithium niobate (PPLN). Five gigahertz of a non-return-to-zero (NRZ) data signal is sampled by sampling pulse with the repetition frequency of 29.31 MHz. The power of the SFG light is set at 23 dBm, and an eye diagram is successfully recovered. A band-pass filter is added before the sampling pulse is subjected to erbium-doped fiber amplifier to reduce gain competition and ensure a high power level of SFG.