Independence of the brittle–ductile transition from the rubber particle size for impact‐modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMs) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle–ductile transition of impact‐modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 °C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle–ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2–341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle–ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle–ductile transition for the PVC/AIM blends. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 696–702, 2006     

Simulation of Patterns and Qualitative Analysis of Pattern Rotation in an End-Pumped Nd：YVO4 Laser

We simulate some laser output patterns observed in our previous experiment employing superposition of Laguerre- Gaussian modes. The rotating pattern is qualitatively analysed from the point of contemporary spatial burning hole effect of the lasing crystal.     

Eucaglobulin, A New Complex of Gallotannin and Monoterpene from Eucalyptus globulus

EucalyPtusgl0bulusLabill.(Myrtaceae)isakindofmedicinalplantwidelydistributedintheYunnanpr0vinceofChina.ItSleaves,rootSandffoitShavebeenusedastraditionalremediesforthetreatmentofinfluenza,dysentery,enteritis,rheumatalgiaandbleeding.BesidesvolatileterpenoidconstituentSintheessential0iloftheleavesandfruits,theoccurrenceofanumber0fphloroglucinol-sesquiterpene-or-m0n0terpene-c0upledcomPoundsnamedmacrocarpals'andeugl0bals'intheleavesandbudshasbeenrepofted.Inordertostudythechendcalandbioactivecon…     

A Convenient Method for the Stereoselective Synthesis of 7αHydroxycholesterol

7-Hydroxyderivativesofcholesteroldisplayawidevarietyofbiologicalactivities'-',mostofwhicharerelatedtothephysiologicalcontrolofcholesterolbiosynthesisandantitumoractivity.Inearlyreports',the7-hydroxycholesterolswerepreparedbythesequenceofacetylation,allylicchromicoxidation,andhydridereduction.Generally,theproductisamixtureof7a-and76-epimerswhichisdifficulttobeseparated.V.Kumaretal5improvedthisprocedurebyusingstereospecificreducingreagentsinsteadofthesimplehydride.7a-and7o-epimerscouldbeobtained…     

苯部分加氢制环己烯的非晶态Ru-M-B/ZrO2催化剂的表征

采用化学还原法，制备了高活性，高选择性非晶态RU-M-B/ZRO2催化剂，并将其用于催化苯部分加氢制环己烯，在140℃、5.0Mpa氢压下，苯转化40%时，环己烯选择性达到85%左右。环己烯最高收率达到52.1%，用XRD、SEM、BET比表面积测定等手段对摧化剂进行表征，XRD和SEM测试表明，RU-U-B/ZRO2属于非晶态，活性组分高度分散，XRD结果证实，在加氢过程中，非晶分解，RU晶化；温度愈高，RU晶化愈快，催化剂的活性、选择性与RU微晶的粒径有关，RU微晶粒径应控制在5nm左右，BET比表面积测定表明，ZRO2的负载提高了催化剂的比表面积，从而有利于活性组分的高度分散，并可阻止RU微晶的长大，讨论了B和ZRO2对提高选择性的作用。     

X…H2O（X=Li，Na，K）非线性光学性质的从头算理论

在MP2水平上采用6-311G基组计算了van der Waals复合物X…H2O(X=Li, Na, K)的非线性光学性质(μ, α, β), 讨论了基组效应和电子相关效应对计算结果的贡献. 在MP2/6-311++G(2df, 2pd)水平上计算得到的三个复合物分子X(X=Li, Na, K)•••H2O的非线性光学性质. 结果表明, 三种复合物分子均具有巨大的一阶超极化率, 其中最外层电子的弥散特性对一阶超极化率有很大的影响.     

苯乙烯和丙烯酸-β-羟乙酯不同温度的竞聚率测定

苯乙烯和丙烯酸 β 羟乙酯不同温度的竞聚率测定吴平平吴玉芳陆琛杨全兴韩哲文（华东理工大学材料科学研究所上海２００２３７）陈顺喜朱清仁（中科院中国科技大学结构分析开放实验室合肥２３００２６）关键词苯乙烯，丙烯酸 β 羟乙酯，共聚合，竞聚率丙烯酸 β?..     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

甲酰胺对有序介孔二氧化硅形貌的影响

At room temperature and in acidic solution, ordered mesoporous silicas with particular morphology were synthesized using cetylpyridinium chloride as the template and formamide as the cosolvent. Scanning electron microscope (SEM), small angle X-ray diffraction (SXRD), and nitrogen adsorption techniques were used to characterize the as-synthesized and calcined samples. Results showed that the samples had hexagonal mesostructure analogous to MCM-41 and relatively narrow pore-size distributions (BJH). Besides, BET surface areas of the samples were in the range of 1 000～1 250 m²·g^-1 and high total pore volumes were up to 1.367 cm³·g^-1. Addition of formamide affected obviously mesostructures and the morphology of the mesoporous silica. Furthermore, with the increase of the concentration of formamide, the unit-cell constant decreased and particle shape changed from gyroids to fibers.