Catalyzation of 1,4-additions of arylboronic acids to α,β-unsaturated substrates using nickel(I) complexes

Nickel(I) complexes were generated in situ from Ni (PPh₃)₂Cl₂ using activated iron and the complexes combined with N,N′-bis(4-fluorobenzylidene) ethane-1,2-diamine (BFBED) were then used as a catalyst for the 1,4-addition reaction of arylboronic acids to α,β-unsaturated substrates. The reaction proceeded to completion and did not require the addition of a base but the addition of potassium iodide is crucial to this cross-coupling reaction. Moreover, experimental observations suggested a possible Ni(I)–Ni(III) catalytic cycle mechanism.     

Comprehensive identification of the binding sites of cisplatin in hen egg white lysozyme

Platinum drugs have become one of the most important kinds of chemotherapy agents, and the interactions of these drugs with proteins play very important roles in their side effects and drug resistance. However, it is still a challenge to determine the binding sites of platinum drugs in proteins with multiple disulfide bonds and stable three-dimensional structures using mass spectrometry. Here, the interaction between cisplatin and hen egg white lysozyme (HEWL), a multi-disulfide-bond-containing protein with a stable three-dimensional structure, was investigated using Fourier transform ion cyclotron resonance mass spectrometry. Typical disulfide bond reduction with dithiothreitol/tris(2-carboxyethyl)phosphine before trypsin digestion destroyed the binding of cisplatin to HEWL, and no platination sites were found. Efficient trypsin digestion methods for HEWL–cisplatin adducts were developed to avoid the loss of platinum binding to protein. At 55 °C, platinated HEWL was digested directly by trypsin in 6 h, and multiple platinated peptides were observed. In 60 % acetonitrile, the digestion time of platinated HEWL was shortened to 2 h, and most of the platinated peptides were observed. In addition, the reduction of the disulfide bonds of HEWL greatly accelerated the reaction between HEWL and cisplatin, and the potential binding sites of cisplatin in reduced HEWL could be easily recognized. On the basis of the above-mentioned methods, multiple binding sites of cisplatin in HEWL were first identified by mass spectrometry.

Novel Red Phosphorescent Polymers Bearing Both Ambipolar and Functionalized IrIII Phosphorescent Moieties for Highly Efficient Organic Light‐Emitting Diodes

A series of novel red phosphorescent polymers is successfully developed through Suzuki cross‐coupling among ambipolar units, functionalized Ir^III phosphorescent blocks, and fluorene‐based silane moieties. The photophysical and electrochemical investigations indicate not only highly efficient energy‐transfer from the organic segments to the phosphorescent units in the polymer backbone but also the ambipolar character of the copolymers. Benefiting from all these merits, the phosphorescent polymers can furnish organic light‐emitting diodes (OLEDs) with exceptional high electroluminescent (EL) efficiencies with a current efficiency (η _L) of 8.31 cd A⁻¹, external quantum efficiency (η _ext) of 16.07%, and power efficiency (η _P) of 2.95 lm W⁻¹, representing the state‐of‐the‐art electroluminescent performances ever achieved by red phosphorescent polymers. This work here might represent a new pathway to design and synthesize highly efficient phosphorescent polymers.

     

Long-Chain Alkane Dehydrogenation over Hierarchically Porous Ti-Doped Pt–Sn–K/TiO2–Al2O3 Catalysts

Kinetics and Catalysis - Hierarchically porous γ-Al2O3, TiO2–Al2O3 composite supports, and Pt–Sn–K/Al2O3 and Pt–Sn–K/TiO2–Al2O3 catalysts were prepared...     

Flexible strain sensor with ridge-like microstructures for wearable applications

The flexible stretchable sensors have great potential for implementation in various applications, such as intelligent soft robots, health monitoring, and motion detection. However, most of the flexible stretchable sensors with microstructures and high sensitivities are fabricated by expensive templates and complex processes. In consideration of large-scale fabrication, a low cost and efficient way is in great demand. Herein, electroless plating on Nafion films with decent swelling ratios are proposed to fabricate stretchable sensors with wrinkle-structured electrodes. By adding isopropanol (IPA) to the electroless plating process, the H₂O-IPA sensor with larger swelling ratio shows deeper surface wrinkles, higher surface roughness, and better sensitivity to strain. At the same time, the H₂O-IPA sensor exhibit good durability (500 cycles). By mounting the sensor on the joint of human finger, the motion of the finger bending and even the bending degree can be accurately detected, indicating the potential use in the field of wearable devices and soft electronic skins.     

自振荡凝胶的仿生运动

定向运动是生命体最基本的功能,是其进化、生存和繁衍的前提。近年来为了研究生命体的运动机制,许多人工系统被相继开发并用于模拟部分生命体的运动行为。在诸多人工仿生系统里,自振荡凝胶由于同时具有内部驱动产生动能、运动定向性、无缆化和环境自适应等性能而备受瞩目。本文介绍了自振荡凝胶仿生运动的化学-机械能转换的理论根源并综述了仿生运动模式研究近期的进展,在此基础上展望了自振荡凝胶运动研究面临的机遇、挑战和未来发展方向。     

Phenylboronic acid-functionalized cross-linked chitosan magnetic adsorbents for the magnetic solid-phase extraction of benzoylurea pesticides

In this study, a 4-formylphenylboronic acid-modified cross-linked chitosan magnetic nanoparticle (FPBA@CCHS@Fe₃O₄) was fabricated. The synthesized material was utilized as the magnetic solid-phase extraction adsorbent for the enrichment of six benzoylurea pesticides. In addition to B-N coordination, FPBA@CCHS@Fe₃O₄ interacts with benzoylureas through hydrogen bonds and π-π stacking interaction on account of rich active groups (amino and hydroxyl) and aromatic rings in structure. Compared to traditional extraction methods, less adsorbent (20 mg) and reduced extraction time (3 min) were achieved. The adsorbent also exhibited good reusability (no less than 10 times). Coupled with a high-performance liquid chromatography–diode array detector, satisfactory recoveries (89.1–103.9%) and an acceptable limit of detection (0.2–0.7 μg/L) were obtained. Under optimized conditions, the established method was successfully applied to the tea infusion samples from six major tea categories with acceptable recoveries ranging from 76.8 to 110%, indicating its application potential for the quantitative detection of pesticides in complex matrices.     

The Influence of Water Vapor on the Electrochemical Shift of an Ionic Liquid Measured by Ambient Pressure X-ray Photoelectron Spectroscopy

Ionic liquids (ILs) are considered to be one of the steppingstones to fabricate next generation electrochemical devices given their unique physical and chemical properties. The addition of water to ILs significantly impact electrochemical related properties including viscosity, density, conductivity, and electrochemical window. Herein we utilize ambient pressure X-ray photoelectron spectroscopy (APXPS) to examine the impact of water on values of the electrochemical shift (S), which is determined by measuring changes in binding energy shifts as a function of an external bias. APXPS spectra of C 1s, O 1s and N 1s regions are examined for the IL 1-butyl-3-methylimidazolium acetate, [C₄mim][OAc], at the IL/gas interface as a function of both water vapor pressure and external bias. Results reveal that in the absence of water vapor there is an IL ohmic drop between the working electrode and quasi reference electrode, giving rise to chemical specific S values of less than one. Upon introducing water vapor, S values approach one as a function of increasing water vapor pressure, indicating a decrease in the IL ohmic drop as the IL/water mixture becomes more conductive and the potential drop is driven by the electric double layer at the electrode/IL interface.     

From borophosphate to fluoroborophosphate: a rational design of fluorine-induced birefringence enhancement

The introduction of oxofluoride anion into anionic group assists to tune optical properties owing to the change of coordination,electronegativity,and according anionic framework.Here,we proposed a rational design of new compounds by fluorine-driven structure and optical property evolution.A new borophosphate Ba_2BP_3O_(11)with the monoclinic space group P2_1/c has been synthesized in the sealed system.Ba_2BP_3O_(11)exhibits a rare P–O–P bridge formation,which is the first example in alkaline-earth metal borophosphates.By further substituting[BO_4]~(3-)with[BO_3F]~(4-),the first alkaline-earth metal/lead fluoroborophosphates M_2BP_2O_8F (M=Ba and Pb) with the same space group were designed.Since the scissors effect of fluorine,in M_2BP_2O_8F (M=Ba and Pb),a BO_3F tetrahedron corner-sharing with three PO_4tetrahedra forms 1D chains along the b-axial direction,which are filled by MO_n(M=Ba/Pb,n=5,6,8) distorted polyhedra.The first principles calculation shows that the borophosphate Ba_2BP_3O_(11)has a birefringence about 0.013@1,064 nm,while the fluoroborophosphates M_2BP_2O_8F (M=Ba and Pb) have the values of 0.035 and 0.043@1,064 nm,respectively.Such an apparent enhancement in birefringence is derived from synergies of the oxyfluoride and cation.The introduction of fluorine-containing heteroanionic groups provides a feasible strategy to design novel promising optical materials.     

Comparative Analysis of Chemical Constituents in Different Parts of Lotus by UPLC and QToF-MS

Six parts of lotus (seeds, leaves, plumule, stamens, receptacles and rhizome nodes) are herbal medicines that are listed in the Chinese Pharmacopoeia. Their indications and functions have been confirmed by a long history of clinical practice. To fully understand the material basis of clinical applications, UPLC-QToF-MS combined with the UNIFI platform and multivariate statistical analysis was used in this study. As a result, a total of 171 compounds were detected and characterized from the six parts, and 23 robust biomarkers were discovered. The method can be used as a standard protocol for the direct identification and prediction of the six parts of lotus. Meanwhile, these discoveries are valuable for improving the quality control method of herbal medicines. Most importantly, this was the first time that alkaloids were detected in the stamen, and terpenoids were detected in the cored seed. The stamen is a noteworthy part because it contains the greatest diversity of flavonoids and terpenoids, but research on the stamen is rather limited.