Convenient synthesis of chiral H4-BINOL via direct hydrogenation of BINOL

<正>A simple,highly effective hydrogenation of chiral BINOL to provide H_4-BINOL in multigram scale with good yield(up to 78% yield) was developed.A series of heterogeneous catalysts was tested in the hydrogenation;;the best result was obtained with 5%Pd/ C in EtOH under the H_2 pressure of 50 bar for 2 h.This method is a more useful method for practical synthesis of optically pure H_4- BINOL than other available methods.     

Catalytic oxidation of soot particulates over MnOx-CeO2 oxides prepared by complexation-combustion method

MnOx-CeO2 oxides prepared by complexation-combustion method were used for soot oxidation. The highest conversion rate of soot was obtained on a MnOx-CeO2 oxide prepared under mild acid condition of pH = 4, where the oxidation temperature corresponding to maximum activity was decreased more than 150℃ compared with that of un-catalytic soot oxidation. The structure and property of the catalysts were investigated by X-ray powder diffraction (XRD) and temperature programmed reduction (TPR). The results indicate...     

Vapor–liquid equilibria and density measurement for binary mixtures of o-xylene + NMF, m-xylene + NMF and p-xylene + NMF at 333.15 K, 343.15 K and 353.15 K from 0 kPa to 101.3 kPa

Isothermal vapor–liquid equilibria at 333.15 K, 343.15 K and 353.15 K for three binary mixtures of o-xylene, m-xylene and p-xylene individually mixed with N-methylformamide (NMF), have been obtained at pressures ranged from 0 kPa to 101.3 kPa over the whole composition range. The Wilson, NRTL and UNIQUAC activity coefficient models have been employed to correlate experimental pressures and liquid mole fractions. The non-ideal behavior of the vapor phase has been considered by using the Peng–Robinson equation of state in calculating the vapor mole fraction. Liquid and vapor densities were measured by using two vibrating tube densitometers. The excess molar volumes of the liquid phase were also determined. Three systems of o-xylene + NMF, m-xylene + NMF and p-xylene + NMF mixtures present large positive deviations from the ideal solution and belong to endothermic mixings because their excess Gibbs energies are positive. Temperature dependent intermolecular parameters in the NRTL model correlation were finally obtained in this study.     

大黄酸键合硅胶固定相的简便制备及色谱性能评价

以大黄酸为原料,γ-氨丙基三乙氧基硅烷(KH-550)为偶联剂,简便制备了一种新型羧基键合硅胶固定相(RBSP),并用红外光谱、热重分析及元素分析对其结构进行表征.考察了流动相中甲醇含量对键合固定相色谱性能的影响,并以含酸性、中性和碱性化合物的混合物为溶质,评价了RBSP的色谱性能.以甲醇-水为流动相,用C18柱作参比,研究了该键合硅胶作为HPLC固定相对两种大豆异黄酮化合物和几种生物碱基的分离,并对其色谱分离机理进行了初步探讨.实验结果表明,该固定相(RBSP)具有较好的反相色谱性能,同时由于键合相中含有酚羟基及酰胺基团,能为多种溶质提供作用位点,对极性化合物的分离具有明显优势,且分离速度快,可有效用于极性化合物的分离分析.     

A two-photon excited luminescence of water-soluble rhodamine-platinum(II) complex: fluorescent probe specific for Hg2+ detection in live cell

The first example of cyclometalated platinum(II)-containing rhodamine probe (1) with two-photon induced luminescent properties was synthesized and investigated for mercury detection. A highly selective color change of 1, from light yellow to pink, is observed only in the presence of Hg²⁺ due to the formation of 1,3,4-oxadiazole ring in 2. This selectivity of Hg²⁺ with color changes can be observed easily by the naked-eye. Meanwhile, a remarkable turn-on and selective 20-fold fluorescent enhancement of 1 upon binding with Hg²⁺ over the other tested metal ions was observed. The water-soluble probe 1 was successfully applied in the visualizing of the site of Hg²⁺ accumulation as well as estimating of trace amounts of mercury ions in live HeLa cells by two-photon microscopy.     

Glycosidic Constituents of Celastrus orbiculatus

Three new, 1 – 3 , and seven known phenolic and terpenic glycosides were isolated from the BuOH‐soluble fraction of 95% EtOH extract of the roots and rhizomes of Celastrus orbiculatus. The structures of the new compounds were elucidated as carvacrol 2‐O‐α‐L ‐rhamnopyranosyl‐(1→6)‐β‐D ‐glucopyranoside ( 1 ), 5‐methoxycarvacrol 2‐O‐α‐L ‐rhamnopyranosyl‐(1→6)‐β‐D ‐glucopyranoside ( 2 ), and 15‐hydroxytorreyol 10‐O‐β‐D ‐apiofuranosyl‐(1→6)‐β‐D ‐glucopyranoside ( 3 ) on the basis of spectroscopic analysis and chemical methods.     

Phytoquinoids and Secoprezizaane‐Type Sesquiterpenes from Illicium arborescens

A phytochemical investigation of the MeOH extract of Illicium arborescens yielded the two new phytoquinoid epimers, 2,3‐didehydro‐5‐O‐methyl‐11‐epiillifunone E ( 1 ) and 2,3‐didehydro‐5‐O‐methylillifunone E ( 2 ), as well as five new sesquiterpene lactones (8,9‐secoprezizaane‐type sesquiterpenes). Two of them, i.e., 3 and 4 , were minwanensin‐type sesquiterpenes, the other two, i.e., 5 and 6 , had the anisatin‐type (or floridanolide type) skeleton, and the fifth, i.e., 7 , was a dunnianin‐type sesquiterpene. Their structures were established by analyses of 1D‐ and 2D‐NMR, HR‐MS, and chemical evidence. The in vitro cytotoxic activity of compounds 1 – 7 was tested against four human tumor cell lines, including HeLa (cervical epitheloid), WiDr (colon), Daoy (medulloblastoma), and Hep2 (liver carcinoma) human‐tumor cells.     

New three-dimensional porous metal organic framework with tetrazole functionalized aromatic carboxylic Acid: synthesis, structure, and gas adsorption properties

5-(1H-Tetrazol-1-yl)isophthalic acid (H(2)L) reacts with Cu(II) ion forming a new metal-organic framework {[CuL]·DMF·H(2)O}(∞) (1) (DMF = N,N-dimethylformamide), with a rutile-related type net topology. Compound 1 possesses a 3D structure with 1D channels that can be desolvated to yield a microporous material. Adsorption properties (N(2), H(2), O(2), CO(2), and CH(4)) of the desolvated solid [CuL] (1a) have been studied, and the results exhibit that 1a possesses fairly good capability of gas sorption for N(2), H(2), O(2), and CO(2) gases, with high selectivity ratios for O(2) over H(2) at 77 K and CO(2) over CH(4) at 195, 273, and 298 K. Furthermore, 1a has excellent O(2) uptake at 77 K and a remarkably high quantity of adsorption for CO(2) at room temperature (298 K) and atmospheric pressure, suggesting its potential applications in gas separation or purification.     

Regenerable Leptin Immunosensor Based on Protein G Immobilized Au‐Pyrrole Propylic Acid‐Polypyrrole Nanocomposite

A regenerable, labelless electrochemical immunosensor is investigated. In this work, pyrrole (Py) and pyrrole propylic acid (Pa) were co‐electropolymerized in the presence of gold nanoparticles to form a porous, conductive, stable and hydrophilic nanocomposite, followed by the covalent attachment of protein G to capture an antibody as the probe for the immunoassay. The regeneration of the sensor was achieved by rinsing the electrodes with 0.1 M glycine buffer (pH 2.7). The binding and dissociation of the antibody with protein G and optimization of the efficient immobilization were studied by impedance and optical measurements, respectively. The charge transfer resistance obtained from the impedance measurements is used to study the interaction between antibody‐protein G and antibody‐antigen. The immunosensor performance and its regenerability were evaluated by using anti‐leptin IgG as the probe protein to detect leptin in 0.01 M PBS, and its specificity was tested in 1% human serum. The leptin impedimetric immunosensor exhibits a detection dynamic range of 10–100 000 ng/mL with 10 ng/mL detection limit in 0.01 M PBS+1% serum solutions. This work proves the feasibility to make a sensitive, regenerative electrochemical immunosensor, which could be very useful for environmental control and food analysis.     

Nonenzymatic Electrochemical Glucose Sensor Based on Pt Nanoparticles/Mesoporous Carbon Matrix

A nonenzymatic amperometric sensor for sensitive and selective detection of glucose has been constructed by using highly dispersed Pt nanoparticles supported onto mesoporous carbons (MCs). The Pt nanoparticles/mesoporous carbons (Pt/MCs) composites modified electrode displayed high electrocatalytic activity towards the oxidation of glucose. At an applied potential of 0.1 V, the Pt/MCs electrode has a linear dependence (R=0.996) in the glucose concentration up to 7.5 mM with a sensitivity of 8.52 mA M^?1 cm^?2. The Pt/MCs electrode has also shown highly resistant toward poisoning by chloride ions and without interference from the oxidation of common interfering species.