Molecular Beam Epitaxy of Nonstoichiometric Semiconductors and Multiphase Material Systems

When arsenides are grown by molecular beam epitaxy at low substrate temperatures, as much as 2% excess arsenic can be incorporated into the epilayer. This excess arsenic is in the form of antisites, but there is also a substantial concentration of gallium vacancies. With anneal, there is a significant decrease in the arsenic antisite and gallium vancancy concentrations as the excess arsenic precipitates. With further anneal, the arsenic precipitates coarsen. This combination of low substrate temperature molecular beam epitaxy and a subsequent anneal results in a broad spectrum of materials, from highly defected epilayers to a two-phase system of semimetallic arsenic precipitates in an arsenide semiconductor matrix. These materials exhibit some very interesting and useful electrical and optical properties.     

Engineering Plasmonic Environments for 2D Materials and 2D-Based Photodetectors

Two-dimensional layered materials are considered ideal platforms to study novel small-scale optoelectronic devices due to their unique electronic structures and fantastic physical properties. However, it is urgent to further improve the light–matter interaction in these materials because their light absorption efficiency is limited by the atomically thin thickness. One of the promising approaches is to engineer the plasmonic environment around 2D materials for modulating light–matter interaction in 2D materials. This method greatly benefits from the advances in the development of nanofabrication and out-plane van der Waals interaction of 2D materials. In this paper, we review a series of recent works on 2D materials integrated with plasmonic environments, including the plasmonic-enhanced photoluminescence quantum yield, strong coupling between plasmons and excitons, nonlinear optics in plasmonic nanocavities, manipulation of chiral optical signals in hybrid nanostructures, and the improvement of the performance of optoelectronic devices based on composite systems.     

Multistage homotopy perturbation method for nonlinear reaction networks

In this paper, we present the multistage homotopy perturbation method for finding the solution of the chemical kinetics with nonlinear reactions. We develop a general scheme for finding the analytic solution of chemical reaction networks and apply it to motivating chemical examples such as the enzyme kinetics model and the Brusselator model. We illustrate the numerical result for the models and show the accuracy of the method.     

The early-stage diagnosis of albinic embryos by applying optical coherence tomography

Albinism is a kind of congenital disease of abnormal metabolism. Poecilia reticulata (guppy fish) is chosen as the model to study the development of albinic embryos as it is albinic, ovoviviparous and with short life period. This study proposed an imaging method for penetrative embryo investigation using optical coherence tomography. By imaging through guppy mother’s reproduction purse, we found the embryo’s eyes were the early-developed albinism features. As human’s ocular albinism typically appear at about four weeks old, it is the time to determine if an embryo will grow into an albino.     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Mitigation of signal suppression caused by the use of trifluoroacetic acid in liquid chromatography mobile phases during liquid chromatography/mass spectrometry analysis via post‐column addition of ammonium hydroxide

A method has been developed to reduce the mass spectrometric ion signal suppression associated with the use of TFA as an additive in LC mobile phases. Through post‐column infusion of diluted NH₄OH solution to LC eluents, the ammonium ion introduced causes the neutral analyte‐TFA ion pair to dissociate which consequently releases the protonated analyte as free ions into the gas phase (through regular electrospray ionization mechanisms). An ion signal improvement from 1.2 to 20 times for a variety of compounds had been achieved through the application of this method. The molar ratios of NH₄OH:TFA which result in a reduction of signal suppression were determined to be between 0.5:1 and 50:1. In addition, it was shown that this NH₄OH infusion method could reduce the level of doubly‐charged species and the product ions formed via in‐source collision. The use of diluted NH₄OH solution is favorable since it is compatible with mass spectrometry analysis, and it is applicable in both positive and negative‐ion generation mode. Copyright © 2012 John Wiley & Sons, Ltd.     

Copper‐catalyzed Clauson–Kass pyrroles synthesis in aqueous media

An efficient and convenient copper‐catalyzed Clauson–Kass reaction of 2,5‐dimethoxytetrahydrofuran with amines in aqueous media has been developed, providing a wide range of N‐substituted pyrroles in good yields. It is noteworthy that the Clauson–Kass reaction of 2,5‐dimethoxytetrahydrofuran with p‐phenylenediamine or m‐phenylenediamine proceeds smoothly to afford the corresponding monopyrroles and bispyrroles with high selectivity in impressive yields. A plausible mechanism for the formation of N‐substituted pyrroles has been proposed. Copyright © 2012 John Wiley & Sons, Ltd.