Constructions of External Difference Families and Disjoint Difference Families

External difference families (EDFs) are a type of new combinatorial designs originated from cryptography. In this paper, some earlier ideas of recursive and cyclotomic constructions of combinatorial designs are extended, and a number of classes of EDFs and disjoint difference families are presented. A link between a subclass of EDFs and a special type of (almost) difference sets is set up.     

Electrical and magnetic properties of CoFeAlO thin films

Influences of oxygen-partial pressure and annealing on the electrical and magnetic properties of CoFeAlO thin films were systematically investigated by means of resistivity, permeability, magnetization and ferromagnetic resonance (FMR) measurements. It was found that, with increasing oxygen-partial pressure or under annealing, the electrical resistivity of the film increased and the magnetic softness decreased, which is attributed to the microstructural change of the film. Interestingly, an as-deposited Co_45.30Fe_20.65Al_19.34O_14.71 film was found to exhibit an inverted hysteresis loop with negative coercivity, and this peculiar phenomenon disappeared upon effects of oxygen-partial pressure and annealing. It was also found that the as-deposited films owned a narrow FMR line width that increased with increasing oxygen-partial pressure or under annealing.     

A note on model diagnostics in longitudinal data analysis

Longitudinal study has become one of the most commonly adopted designs in medical research. The generalized estimating equations (GEE) method and/or mixed effects models are employed very often in causal inferences. The related model diagnostic procedures are not yet fully formalized, and perhaps never will be. The potential causes of major problems are the high variety of the dependence within subjects and/or the number of repeated measurements. A single testing procedure, e.g., run test, is not possible to resolve all model diagnostics problems in longitudinal data analysis. Multiple quantitative indexes for model diagnostics are needed to take into account this variety. We propose eight testing procedures for randomness accompanied with some conventional and/or non-conventional plots to remedy model diagnostics in longitudinal data analysis. The proposed issue in this paper is well illustrated with four clinical studies in Taiwan.     

High-frequency characteristics of CoFeVAlONb thin films

High-frequency characteristics of CoFeVAlONb thin films were studied. A thin film of Co_43.47Fe_35.30V_1.54Al_5.55O_9.93Nb_4.21 is observed to exhibit excellent magnetic properties; magnetic coercivity of 1.24 Oe, uniaxial in-plane anisotropy field of 66.99 Oe, and saturation magnetization of 19.8 kG. The effective permeability of the film is as high as 1089 and is stable up to 1.8 GHz, and with ferromagnetic resonance over 3 GHz. This film also has very high electrical resistivity of about 628 μΩ cm. These superior properties make it ideal for high-frequency magnetic applications.     

GA optimization on multi-segments muffler under space constraints

Whilst the space volume of muffler in noise control system is often constrained for maintenance in practical engineering work, the maximization on muffler’s performance becomes important and essential. In this paper, a novel approach genetic algorithms (GAs) based on the principles of natural biological evolution will be used to tackle this optimization of muffler design [M. Mitchell, An Introduction to Genetic Algorithms, The MIT Press, Cambridge, MA, 1996]. Here, the shape optimization of multi-segments muffler coupled with the GA searching technique is presented. The techniques of binary genetic algorithms (BGA) together with the commercial MATLAB package [G. Lindfield, J. Penny, Numerical Method Using Matlab, second ed., Prentice Hall, Englewood Cliffs, NJ, 2000] are applied in GA searching. In addition, a numerical case of pure tone elimination with 2-5 segments on muffler is introduced and fully discussed. To achieve the best optimization in GA, several GA parameters are on trial in various values. Results show that the GA operators, including crossover mutation and elitism, are essential in accuracy. Consequently, results verify that the optimal sound transmission loss at the designed frequency of 500 Hz is exactly maximized. The GA optimization on multi-segments muffler proposed in this study surely provides a quick and correct approach.     

Analysis of CCD moiré pattern for micro-range measurements using the wavelet transform

A new approach based on the moiré theory and wavelet transform (WT) is proposed for measuring the micro-range distance between a charge-couple-device (CCD) camera and a two-dimensional reference grating. The micro-range distance is determined by measuring the pitch of the moiré pattern image, which is digitized by a CCD camera. A one-dimensional WT algorithm is applied to estimate the pitch of the moiré pattern. Experimental results prove that this technique is very efficient and highly accurate. The moiré range finder is an economic technique for measuring a micro-range distance.     

Li(AlxCo1-x)O2晶体中Co3+电子态的变化及对结构演化的影响

研究了应用于锂二次电池正极的新型高能量密度存贮材料Li(AlxCo1-x)O2 (x=01—05)的磁性.发现Al3+的掺杂可导致Co3+中d电子自旋态发生变化，即有部分d电子进入高自旋态.伴随Co3+中电子状态的改变，材料结构演化也发生了相应变化，表现为c/a比增大明显减缓，较好地解释了材料结构对Vegard定律的正偏离.这对材料的微观结构与性能设计具有重要意义. 关键词： 锂电池材料 Li（AlxCo1-x）O2 磁性 自旋态 结构演化     

一种能补偿热效应的高功率端面泵浦Nd:YVO4激光谐振腔的设计

针对激光二极管端面泵浦的Nd:YVO₄全固态激光器,提出了一种利用双晶体,对Nd:YVO₄的热效应进行补偿的方案,同时该方案又能提高最大输出功率,避免由于插入附加光学元件所导致的损耗,满足调Q以及提高腔内倍频效率的要求.     

单光子探测器量子效率的绝对自身标定方法

提出一种单光子探测器量子效率的绝对自身标定方案，利用光参量下转换过程中产生的光子对在时间上的相关性，先将参量光束分为两路，然后引入相对延时，使同时产生的孪生光子先后进入单光子探测器，然后将探测器之后的电路分为三路，其中一路直接进入计数器得到探测器所探测到的光子的总计数率，另两路用电路方法引入和光路相当的相对延时，经符合电路后进入计数器，得到前后到达探测器的光子对之间的符合计数率.这样，从符合计数率与总光子计数率之比即可在不需要任何其他探测器或者参照标准的情况下获得探测器的量子效率.文中给出两种方案，分别适     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004