Modeling,Simulation and Parameter Identification for Rate-Dependent Magnetoactive Polymer Response

A finite deformation framework for nonlinear magneto-viscoelasticity is introduced and applied to the constitutive and structural modeling of magnetoactive polymer (MAP) response. In this thermodynamically-consistent formulation the free energy function consists of purely elastic, purely magnetic and coupling contributions, where the rate-dependence is fully attributed to the non-magnetizable matrix material. The model consistently accounts for saturation in the magnetic as well as the magnetostrictive behavior. The identification of material parameters from experimental data is briefly described. Finally, a finite element model for the large strain magneto-mechanical problem is established and tested considering MAP behavior. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Amine‐Responsive Adaptable Nanospaces: Fluorescent Porous Coordination Polymer for Molecular Recognition

Flexible and dynamic porous coordination polymers (PCPs) with well‐defined nanospaces composed of chromophoric organic linkers provide a scaffold for encapsulation of versatile guest molecules through noncovalent interactions. PCPs thus provide a potential platform for molecular recognition. Herein, we report a flexible 3D supramolecular framework {[Zn(ndc)(o‐phen)]?DMF}_n (o‐phen=1,10‐phenanthroline, ndc=2,6‐napthalenedicarboxylate) with confined nanospaces that can accommodate different electron‐donating aromatic amine guests with selective turn‐on emission signaling. This system serves as a molecular recognition platform through an emission‐readout process. Such unprecedented tunable emission with different amines is attributed to its emissive charge‐transfer (CT) complexation with o‐phen linkers. In certain cases this CT emission is further amplified by energy transfer from the chromophoric linker unit ndc, as evidenced by single‐crystal X‐ray structural characterization.     

Study on typical behavior of transient nature (I-t) and hysterisis nature of I–V characteristics of dye doped solid state thin film photoelectrochemical cell

In this present investigation, we describe the steady state current voltage (I–V) characteristic of Crystal violet dye dispersed solid state photoelectrochemical cell (PEC). Typical behavior of dark current-voltage characteristic by increasing and decreasing external bias voltage has a similar form like hysterisis in nature. Although we have already observed this hysterisis nature in case of both forward and reverse bias condition, yet it is clear that the reverse hysterisis curve is more prominent than forward hysterisis. In this paper, we are getting double values of current (I) for a single value voltage, which is also helpful to understand the charge transport process through disordered materials. As the bias increases, the distribution of traps depth, which is exponential in nature, changes toward order state (resulting increase in disordered parameter α) This means that as α increases, it tends to reach the most order state of material. When external bias voltage is at 3.5 V, the value of disorder parameter becomes 1, and when bias voltage is beyond 3.5 V, the diffusion comes enhanced in nature.     

Mixed micellization of anionic–nonionic surfactants in aqueous media: a physicochemical study with theoretical consideration

Mixed micellization of binary and ternary mixtures of anionic and nonionic surfactants, such as lithium dodecyl sulfate, polyoxyethylene(23)laurylether, and polyoxyethylene-tert-octylphenylether, is studied in aqueous solution using tensiometric, conductometric, and spectrophotometric methods. Although tensiometry and conductometry complement each other closely, the spectroscopic critical micellar concentration (cmc) is far from agreement with tensiometric study. Several parameters, e.g., cmc, degree of counterion binding, free energies of micellization, and interfacial adsorption, have been evaluated. Established theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Blankschtein were applied to evaluate the mole fraction of different components in the self-aggregated phase, the interaction parameter, free energy contributions, and expected cmc.     

Nano-iron oxide-encapsulated chitosan microspheres as novel adsorbent for removal of Ni (II) ions from aqueous solution

The present study investigates the utility of composite beads of nano-particles of iron oxide and chitosan for removing Ni (II) ions from aqueous solution by batch and column adsorption techniques. In the batch mode experiment, the influence of pH, concentration, adsorbent dose, temperature, column mode, bed height, flow rate and initial concentration were studied on the adsorption profiles of nickel ions. The maximum uptake of Ni (II) ions was obtained at pH 4.0 in 30 min at room temperature.     

Azimuthal correlation and fractal study of compound hadrons (pions and protons) at Dubna and SPS energy

This paper presents an investigation of compound hadrons (pions and protons) distribution emitted from ²⁴Mg-AgBr and ¹²C-AgBr interactions both at 4.5 AGeV and ³²S-AgBr interactions at 200 AGeV. The study includes azimuthal correlations (two particle and three particle), azimuthal asymmetry and fractal behaviour. This paper reveals some interesting results.     

Membrane Disruption and Enhanced Inhibition of Cell‐Wall Biosynthesis: A Synergistic Approach to Tackle Vancomycin‐Resistant Bacteria

Resistance to glycopeptide antibiotics, the drugs of choice for life‐threatening bacterial infections, is on the rise. In order to counter the threat of glycopeptide‐resistant bacteria, we report development of a new class of semi‐synthetic glycopeptide antibiotics, which not only target the bacterial membrane but also display enhanced inhibition of cell‐wall biosynthesis through increased binding affinity to their target peptides. The combined effect of these two mechanisms resulted in improved in vitro activity of two to three orders of magnitude over vancomycin and no propensity to trigger drug resistance in bacteria. In murine model of kidney infection, the optimized compound was able to bring bacterial burden down by about 6 logs at 12 mg kg^?1 with no observed toxicity. The results furnished in this report emphasize the potential of this class of compounds as future antibiotics for drug‐resistant Gram‐positive infections.     

Understanding guest and pressure‐induced porosity through structural transition in flexible interpenetrated MOF by Raman spectroscopy

Interpenetrating metal organic frameworks are interesting functional materials exhibiting exceptional framework properties. Uptake or exclusion of guest molecules can induce sliding in the framework making it porous or non‐porous. To understand this dynamic nature and how framework interaction changes during sliding, metal organic framework (MOF) 508 {Zn(BDC)( 4,4′‐Bipy)_0.5 · DMF(H₂O)_0.5} was selected for study. We have investigated structural transformation in MOF‐508 under variable conditions of temperature, pressure and gas loading using Raman spectroscopy and substantiated it with IR studies and density functional theory (DFT) calculations. Conformational changes in the organic linkers leading to the sliding of the framework result in changes in Raman spectra. These changes in the organic linkers are measured as a function of high pressure and low temperature, suggesting that the dynamism in MOF‐508 framework is driven by ligand conformation change and inter‐linker interactions. The presence of Raman signatures of adsorbed CO₂ and its librational mode at 149 cm⁻¹ suggests cooperative adsorption of CO₂ in the MOF‐508 framework, which is also confirmed from DFT calculations that give a binding energy of 34 kJ/mol. Copyright © 2015 John Wiley & Sons, Ltd.     

Polymer‐Chlorambucil Drug Conjugates: A Dynamic Platform of Anticancer Drug Delivery

Recently, polymer drug conjugates (PDCs) have attracted considerable attention in the treatment of cancer. In this work, a simple strategy has been developed to make PDCs of an antitumor alkylating agent, chlorambucil, using a biocompatible disulphide linker. Chlorambucil‐based chain transfer agent was used to prepare various homopolymers and block copolymers in a controlled fashion via reversible addition–fragmentation chain transfer polymerization. Chlorambucil conjugated block copolymer, poly(polyethylene glycol monomethyl ether methacrylate)‐b‐poly(methyl methacrylate), formed nanoaggregates in aqueous solutions, which are characterized by dynamic light scattering and field emission‐scanning electron microscopy. Finally, the simplicity of the design is exemplified by performing a release study of chlorambucil under reducing condition by using D,L‐dithiothreitol.