Thermoluminescent dosimeters are widely applied in the measurement of radiation dose. Since the luminescent centers are not lost during the reading process, radiophotoluminescent glass dosimeters (RPLGDs) can be repeatedly readout. The aims of this study were to make RPLGD and to analyze its physical and chemical properties. This study used chemical compounds such as Na3PO4, AlPO4, AgCl, AgNO3, B2O3, H3PO4 and P2O5 as the main ingredients. Depending on the self-fabricated glass compounds, the melting temperatures were between 1100 and 1500 °C. When the 0.1 mol% of silver was added, the radiation detection of self-fabricated RPLGD reached to the highest sensitivity. However, when silver concentration was larger than 0.1 mol%, the radiation detection sensitivity plummets rapidly. Excess amounts of silver and aluminum decreased the penetrate capability of ultraviolet spectrum. Based on our study, we found that chemical compound concentrations and melting process, which all affect radiation sensitivity and stability of self-fabricated RPLGD. 相似文献
This article covers the incompatible properties of nitric acid (HNO3) with formic acid (CH2O2), and more generally with various acids such as sulfuric acid (H2SO4), hydrochloric acid (HCl), and acetic acid (C2H4O2). Differential scanning calorimetry (DSC) was employed to determine the thermal hazard such as heat of decomposition (ΔHd), exothermic onset temperature (T0), etc., in various acids. T0 of HNO3 and CH2O2 were determined as 50 °C using DSC. Thus it has been observed that HNO3 mixed with CH2O2 should be prohibited during transportation, storage, and use. And more generally, process safety engineers and operator must take care to handle tanker and storage tank of typical acids in the transportation, storage, and manufacturing process. It is clear that there exists a need to follow and enforce in the chemical industries safety data sheets, globally harmonized system of classification and labeling of chemicals of United Nations (UN), education of safety and health, emergency response system, and process safety management. It is the aim of the present study concerning HNO3 with various acids. 相似文献
Inductively coupled plasma mass spectrometry coupled with ultrasonic slurry sampling electrothermal vaporization (USS-ETV-ICP-MS) has been applied to determine Pd, Rh, Pt and Au in 0.5% m/v slurries of several road dust samples. 2% m/v ammonium pyrrolidine dithiocarbamate (APDC) was used as the modifier to enhance the ion count. The influence of instrument operating conditions, slurry preparation and interferences on the ion count was reported. This method has been applied to the determination of Pd, Rh, Pt and Au in BCR 723 Road Dust and NIST SRM 2709 San Joaquin Soil reference materials and two road dust samples collected locally. The analysis results of the standard reference materials agreed with the certified values. Precision between sample replicates was better than 10% for all the determinations. The method detection limits estimated from standard addition curves were 0.9, 0.4, 0.6 and 0.4 ng g−1 for Pd, Rh, Pt and Au, respectively, in original dust samples. 相似文献
Solid‐state Nuclear Magnetic Resonance (ss‐NMR) 13C single‐pulse excitation spectroscopy in combination with the magic‐angle spinning (MAS) technique was applied to a series of Phalaenopsis tissues, including the leaf, sheath, stem, and root, at different growth and spiking periods. Compared with{1H}/13C cross‐polarization MAS spectra, the 13C single‐pulse excitation MAS spectra displayed very distinct spectral patterns, recognizable as fingerprints of the tissues studied. 1Here, we demonstrate that solid‐state 13C single‐pulse excitation NMR spectroscopy provides a direct and robust analytical tool for studying the various tissues of Phalaenopsis in different growth and spiking induction periods. 相似文献
Bacterial cellulose (BC) is a nanoscale and useful biomaterial with a fine fiber network and high water holding capacity. However, dried BC exhibits poor rehydration ability. The present study investigated the rehydration ability of composites of hydrolyzed gelatin peptides (HGP) and hydroxypropylmethyl cellulose-modified BC (HBC). The HGP with molecular weights <9 kDa were obtained by hydrolyzing gelatin with a combination of 1 % alcalase and 1.5 % pronase E at 50 °C for 2 h. The HGP/HBC nanocomposites exhibited higher rehydration ratios than composites prepared with gelatin. According to SEM images, gelatin and HGP successfully penetrated the cellulose network in composite films prepared using both immersion and adsorption (DA) methods. The high hydrophilic property of HGP resulted in a rehydration ratio of approximately 180 % at a HGP/HBC ratio of 4.5:1 (W/W) in DA composites. The 1 min rehydrated HGP/HBC composites possessed similar mechanical properties to the original wet type composites. Overall, results indicated that the HGP/HBC composites prepared using the DA method demonstrated the highest rehydration ability among the composite films evaluated. 相似文献
A simple, low-cost, and efficient online focusing method that combines a dynamic pH junction and sweeping by capillary electrophoresis with polymer solutions was developed and optimized for the simultaneous determination of benzoic acid (BA) and sorbic acid (SA). A sample solution consisting of 2.5 mM phosphate at pH 3.0 and a buffer solution containing 15 mM tetraborate (pH 9.2), 40 mM sodium dodecyl sulfate, and 0.100 % (w/v) poly(ethylene oxide) were utilized to realize dynamic pH junction–sweeping for BA and SA. Under the optimized conditions, the entire analysis process was completed in 7 min, and a 900-fold sensitivity enhancement was achieved with limits of detection (S/N?=?3) as low as 8.2 and 6.1 nM for BA and SA, respectively. The linear ranges were between 20 nM and 20 μM for BA and 20 nM and 10 μM for SA, with correlation coefficients greater than 0.992. The recoveries of the proposed method ranged from 90 to 113 %. These satisfactory results indicate that this method has the potential to be an effective analytical tool for the rapid screening of BA and SA in different food products.
Figure An online focusing strategy combining dynamic pH junction and sweeping for sensitive determination of benzoic and sorbic acid in food products using capillary electrophoresis wit polymer solutions
To date, various affinity-based protein labeling probes have been developed and applied in biological research to modify endogenous proteins in cell lysates and on the cell surface. However, the reactive groups on the labeling probes are also the cause of probe instability and nonselective labeling in a more complex environment, e. g., intracellular and in vivo. Here, we show that labeling probes composed of a sterically stabilized difluorophenyl pivalate can achieve efficient and selective labeling of endogenous proteins on the cell surface, inside living cells and in vivo. As compared with the existing protein labeling probes, probes with the difluorophenyl pivalate exhibit several advantages, including long-term stability in stock solutions, resistance to enzymatic hydrolysis and can be customized easily with diverse fluorophores and protein ligands. With this probe design, endogenous hypoxia biomarker in living cells and nude mice were successfully labeled and validated by in vivo, ex vivo, and immunohistochemistry imaging. 相似文献
Bundle-type mutil-walled carbon nanotubes (MWCNTs) composite electrode is the first investigation and publication for the supercapacitor application. According to the thermogravimetric analysis results, as-synthesized BCNTs are considered as the electrode materials for supercapacitors and electrochemical double-layer capacitor in this study. The Brunauer–Emmett–Teller specific surface area of as-prepared bundled carbon nanotubes (BCNTs) is 95.29 m2/g given to a type III isotherm and H3 hysteresis loops. Slow scanning rates promote and enhance to achieve high Cb because of the superior conductivity of CNT bundles and one side close-layered Ni/Mg/Mo alloy inside the BCNT-based electrode and facile electron diffusivity between electrolyte and electrode. The specific capacitance Cs (1,560 F/g) is nearly equal to the maximum specific capacitance, which the BCNT-based composite electrode can actually be able to charge or fill in. The maximum energy density value is 195 Wh/kg with corresponding power density values of 0.21 kW/kg. Furthermore, the active 3D BCNTs material fabricated electrode enhances to contact the electrolyte directly and decreases the ion diffusion limitation. Electrochemical impedance spectroscopy spectrum summarized as the low-frequency area controls by mass transfer limitation, and the high-frequency area dominates by charge transfer of kinetic control. After 2,000 consecutive cyclic voltammetry sacnings and galvanostatic charge-discharge cycles at a current density of 1.67 A/g performs, the specific capacitance retentions of 3D BCNTs electrodes achieved 128.2 and 77.3%, respectively. Three-dimensional BCNT composite electrodes exhibit good conductivity and low charge transfer resistance, which is beneficial to fast charge transfer between the BCNTs electrode materials and electrolytes. 相似文献