Preparation of epitaxial compositionally graded (Ba1-xSrx)TiO3 thin films with enhanced dielectric properties

Epitaxial compositionally graded (Ba_1-xSr_x)TiO₃ (BST) (0.0x0.25) thin films were deposited on (100) LaAlO₃ substrates by pulsed laser ablation, the substrates having bottom electrodes made of 100-nm-thick conductive La_0.5Sr_0.5CoO₃ (LSCO). Extensive X-ray diffraction, rocking-curve, and -scan studies indicate that the graded films are (100)-oriented and exhibit good in-plane relationships of [010]_BST//[010]_LAO and [001]_BST//[001]_LAO. For the up-graded films with barium concentration (1-x) increasing across the film thickness in the direction from the film/substrate interface to the film surface, the full width at half maximum of the BST film (200) rocking curve and the surface roughness, examined by atomic force microscopy, were larger than those of the down-graded films with barium concentration decreasing from the film/substrate interface to the film surface. The dielectric properties of the graded films, measured using vertical structures, show that at room temperature, the dielectric constant (_r) and dissipation factor (cos) at 100 kHz were 380 and 0.013 for the up-graded films, and 650 and 0.010 for the down-graded films, respectively. The dielectric behavior was enhanced in the down-graded films, which was attributed to the fact that the pure BaTiO₃ layer in the down-graded BST films not only serves as a bottom layer but also acts as an excellent seeding layer for enhancing subsequent film growth, leading to better film crystallinity and larger grain sizes in the down-graded films. The graded BST films undergo a diffuse phase transition, giving a broad, flat capacitance-versus-temperature profile. With such a graded structure, it is possible to build a dielectric thin-film capacitor having a capacitance which has a low temperature dependence over a broad temperature regime. PACS 77.55.+f; 68.55.Jk; 81.15.Fg     

离散孔纵向波纹隔热屏气膜冷却特性研究

本文对离散气膜孔型纵向波纹隔热屏的冷却特性进行数值计算.研究中主要参数有冷却通道无量纲高度h,波纹板无量纲高度b及气膜孔无量纲直径d.波纹板高度的变化对冷却效果的影响最为明显.波纹板高度越小,隔热屏壁面冷却效果越好.降低冷却通道高度可以提高隔热屏前面部分的冷却效果.开孔率一定,气膜孔直径较小,隔热屏冷却效果较好.     

Transparent carbon nanotube-based driving electrodes for liquid crystal dispersion display devices

We report the fabrication of transparent rigid or flexible liquid crystal dispersion displays driven by electrodes prepared from coating inert substrates with stable aqueous suspensions of single-walled carbon nanotubes (SWNTs) or multiple-walled carbon nanotubes (MWNTs). The SWNT-coated electrodes exhibit a dense nanotube network with a sheet resistivity ( 25 k) about one decade lower than that of their MWNT counterparts. The electro-optical performance of the SWNT-based devices is at least equivalent to that of an indium tin oxide-based display, whereas those driven by MWNT electrodes operate at slightly higher threshold and saturation voltages. The novel, flexible display devices can be repeatedly bent without any noticeable loss of physical characteristics. PACS 42.79.Kr; 61.46.+w; 81.07.De     

Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg grating

A sensor head consisting of a photonic crystal fiber (PCF)-based Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. The MZI fabricated by splicing a short length of PCF between two single-mode fibers with the air-hole structure that completely collapsed near the splicing points, is sensitive to fiber bending and surrounding temperature, while the FBG is only sensitive to the later. Simultaneous measurement of curvature and temperature is therefore obtained. Sensitivities of 4.06 nm/m^− 1 and 6.30 pm/°C are achieved experimentally for curvature and temperature, respectively. And the corresponding resolutions are 5.2 × 10^− 4 m^− 1 and 1.25 °C for curvature and temperature, respectively, based on the wavelength measurement resolution of 10 pm.     

A geometric characterisation of resonance in Hopf bifurcation from relative equilibria

We give a new characterisation of resonance in Hopf bifurcation from relative equilibria in systems with compact symmetry group. This characterisation provides a full geometric explanation of the resonance phenomenon. In addition, we develop techniques based on normal form theory to give a complete solution to the associated bifurcation problem.     

Ultrasonic transducers using electron-irradiated vinylidene fluoride-trifluoroethylene copolymers

Single-element, planar transducers have been fabricated using electron-irradiated poly(vinylidene fluoride-trifluoroethylene) 80/20 mol% copolymers with different electron dosage. Electrical field-induced strain response of copolymer film with 100 Mrad dosage has been studied at 5 kHz and the electrostrictive coefficient was calculated. The transmitting response of the air-backing and epoxy-backing transducers was evaluated with the application of high DC bias voltages. Clear ultrasonic amplitudes and high frequency spectrum (>20 MHz) were observed when driven from a standard ultrasonic voltage source through a decoupling circuit. It has also showed that larger generation of ultrasonic waves will be induced under high DC bias field, which is due to the increase of induced d(33) piezoelectric coefficient. Two different polar bias voltages, positive and negative, were applied to the transducers and inverse waveforms were received, which was coincident with the theoretical analysis of the strain response of electrostrictive film.     

Effects of air on the segregation of particles in a shaken granular bed

Effects of interstitial air on the motions of a large intruder in a shaken granular bed are studied experimentally as a function of ambient air pressure, particle size of the bed, and the density of the intruder. It is found that the intruder always rises from the granular bed in the absence of air. However, the intruder can acquire both positive and negative buoyancy in the presence of air. Negative buoyancy can be observed only when both the density of the intruder and the particle size of the bed are small enough. This negative buoyancy can be explained by the unusual air pressure distribution found in the bed.     

Optical bistability in an all-optical fiber nonlinear fabry-perot resonator with linear absorption

An all-optical fiber nonlinear Fabry-Perot resonator is proposed. The steady-state model for describing this resonator is developed. The transmission and refection bistabilities are shown numerically. Our results show that the bistability in this system is similar to that in a normal nonlinear Fabry-Perot etalon, except that the characteristics of the bistability can be changed not only by the cavity length but also by the phase shifts of the fiber loop mirrors.     

Global nature of dilute-to-dense transition of granular flows in a 2D channel

The dilute-to-dense transition of granular flow of particle size d(0) is studied experimentally in a two-dimensional channel (width D) with confined exit (width d). Our results show that with fixed d and D there is a maximum inflow rate Q(c) above which the flow changes from dilute to dense and the outflow rate drops abruptly from Q(c) to a dense rate Q(d). A rescaled critical rate q(c) is found to be a function of a scaling variable lambda only: q(c) approximately F(lambda), where lambda identical with d/d(0) d/D-d. This form of lambda suggests that the dilute-to-dense transition is a global property of the flow, unlike the jamming transition which depends only on d/d(0). Furthermore, the transition is found to occur when the area fraction of particles near the exit exceeds a critical value which is close to 0.65+/-0.03.     

Magnetostrictive Polarization Compensation on SOI Rib Waveguide

We proposed a novel application of magnetostriction for tuning differential -group- delay (DGD)and polarization- dependent-loss (PDL) of silicon- on -insulator waveguide. A magnetic-field induced change inPDL of over 4dB and a change in DGD by 1ps was demonstrated.