Tetrapyrrole derivatives substituted with ferrocenylethynyl moieties. synthesis and electrochemical studies

Up to eight redox-active ferrocenyl units have been incorporated, through the unsaturated ethynyl linkers, on the periphery of a series of cyclic tetrapyrrole derivatives including zinc(II) phthalocyanine and 2,3-naphthalocyanine, and nickel(II) meso-diphenylporphyrin. The synthesis of the former two macrocycles 4 and 7 involves the Sonogashira coupling reaction of ferrocenylethyne with 4,5-dichlorophthalonitrile (1) or 6,7-dibromonaphthalonitrile (5), respectively, followed by a base-promoted cyclization. The meso-bis(ferrocenylethynyl)porphyrin 11 has been prepared from the dibromo analogue 10 also by a palladium-catalyzed coupling reaction. These novel macrocyclic compounds have been spectroscopically and electrochemically characterized. As revealed by cyclic voltammetry, the ferrocenyl moieties appear to be electrochemically independent in these complexes and there is no significant electronic coupling among the iron(II) centers.     

Preconcentration using diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) for determination of molybdenum(VI) in seawater by ICP–OES

This paper reports a new method for preconcentration and separation of trace amounts of molybdenum in seawater samples prior to determination by inductively coupled plasma–atomic emission spectroscopy (ICP–OES). Diethylenetriaminetetraacetic acid-functionalized polysiloxane (DETAP) was synthesized by carboxymethylation of amino groups on triamine immobilized polymer, which was prepared by modification of 3-chloropropylpolysiloxane with diethylenetriamine. The resulting polysiloxane is highly selective and efficient in chelating Mo(VI) at trace levels. It can be used as a column packing material. The polysiloxane column can be reused over ten times without losing its original properties, so it is suitable for preconcentration of molybdenum species in seawater samples before determination. The parameters governing the characteristics of polysiloxane for adsorption of Mo(VI) were investigated. These include the effect of pH, amount of polysiloxane, equilibrium time, adsorption isotherm, maximum adsorption capacity, interfering ions, flow rate, capacity for reuse, and desorption. The precision of the preconcentration method, calculated as the relative standard deviation of seawater samples, was 3%. The preconcentration factor was 100. The detection limit, defined as 3 times the standard deviation of five replicate measurements of the blank sample at pH 3, was 0.17 g L^–1. Measurement results for standard reference materials were in good agreement with the certified values [(CRMs), NASS-2 Seawater (Open Ocean) and CASS-2 Seawater (Coastal)].     

Irreversible and Reversible Deactivation of Bilirubin Oxidase by Urate

Oxygen is electroreduced to water on a carbon cathode coated with wired bilirubin oxidase in a pH 7.4 0.15 M NaCl phosphate buffer solution at 37 °C at much lesser polarization than it is on a pure platinum cathode in 0.5 M H₂SO₄. While the wired bilirubin oxidase cathode operates for over a week in the aerated or oxygenated buffer solution, it is degraded rapidly when in serum. We reported earlier that in the presence of O₂ an intermediate product of the electrooxidation of urate, which is a normal serum component, irreversibly damages the wired bilirubin oxidase and also reported that the electrocatalyst is irreversibly damaged, in the absence of urate, when it is brought, by disconnecting the electrode, to the O₂/H₂O half cell potential at pH 7.4. Here we report that a) dissolved bilirubin oxidase is irreversibly and rapidly damaged by urate in the presence of O₂; and b) that the immobilized wired bilirubin oxidase electrocatalyst is not only irreversibly deactivated by urate in the presence of O₂ in a few hours, but is initially reversibly deactivated, in 1 min or less, by the urate in the presence of O₂.     

On the apparent molar volumes of nonelectrolytes in water

Apparent molar volumes of aqueous solutions of argon and xenon have been calculated using a previously developed comprehensive equation of state for nonelectrolyte systems. The equation consists of a virial expansion truncated after the fourth virial coefficient and a closed-form term approximating higher coefficients. Mixing rules are based on the composition dependence of virial coefficients, which is known from statistical mechanics. The equation accurately represents vapor-liquid and gas-gas equilibria for the Ar+H₂O and Xe+H₂O systems over wide ranges of pressure and temperature using two binary parameters. With the binary parameters determined from phase equilibrium data, the equation accurately predicts apparent molar volumes V in the near-critical and far-from-critical regions. Apart from reproducing experimental V data, the equation reveals remarkable maxima of V as a function of pressure and temperature in the near-critical region. The implications of this equation with respect to the Ar–H₂O potential are discussed via the second virial coefficient.     

Synthesis of the lipophilic antifolate piritrexim via a palladium(0)-catalyzed cross-coupling reaction

[reaction: see text] A regiospecific and convergent route the lipophilic antifolate piritrexim (PTX) is described in which a key step is a Pd(0)-catalyzed cross-coupling reaction between 2-amino-3-cyano-4-methyl-5-bromopyridine and 2,5-dimethoxybenzylzinc chloride to form 2-amino-4-methyl-5-(2,5-dimethoxybenzyl)nicotinonitrile. To complete the synthesis, the amino group is replaced by a more reactive bromine atom via nonaqueous diazotization with tert-butyl nitrite, and the resultant bromo nitrile is cyclized with guanidine.     

Ultrafast time-resolved study of photophysical processes involved in the photodeprotection of p-hydroxyphenacyl caged phototrigger compounds

A combined femtosecond Kerr gated time-resolved fluorescence (fs-KTRF) and picosecond Kerr gated time-resolved resonance Raman (ps-KTR(3)) study is reported for two p-hydroxyphenacyl (pHP) caged phototriggers, HPDP and HPA, in neat acetonitrile and water/acetonitrile (1:1 by volume) solvents. Fs-KTRF spectroscopy was employed to characterize the spectral properties and dynamics of the singlet excited states, and the ps-KTR(3) was used to monitor the formation and subsequent reaction of triplet state. These results provide important evidence for elucidation of the initial steps for the pHP deprotection mechanism. An improved fs-KTRF setup was developed to extend its detectable spectral range down to the 270 nm UV region while still covering the visible region up to 600 nm. This combined with the advantage of KTRF in directly monitoring the temporal evolution of the overall fluorescence profile enables the first time-resolved observation of dual fluorescence for pHP phototriggers upon 267 nm excitation. The two emitting components were assigned to originate from the (1)pipi (S(3)) and (1)npi (S(1)) states, respectively. This was based on the lifetime, the spectral location, and how these varied with the type of solvent. By correlating the dynamics of the singlet decay with the triplet formation, a direct (1)npi --> (3)pipi ISC mechanism was found for these compounds with the ISC rate estimated to be approximately 5 x 10(11) s(-)(1) in both solvent systems. These photophysical processes were found to be little affected by the kind of leaving group indicating the common local pHP chromophore is largely responsible for the fluorescence and relevant deactivation processes. The triplet lifetime was found to be approximately 420 and 2130 ps for HPDP and HPA, respectively, in the mixed solvent compared to 150 and 137 ns, respectively, in neat MeCN. The solvent and leaving group dependent quenching of the triplet is believed to be associated with the pHP deprotection photochemistry and indicates that the triplet is the reactive precursor for pHP photorelease reactions for the compounds examined in this study.     

Recent developments in the maytansinoid antitumor agents

Maytansine and its congeners have been isolated from higher plants, mosses and from an Actinomycete, Actinosynnema pretiosum. Many of these compounds are antitumor agents of extraordinary potency, yet phase II clinical trials with maytansine proved disappointing. The chemistry and biology of maytansinoids has been reviewed repeatedly in the late 1970s and early 1980s; the present review covers new developments in this field during the last two decades. These include the use of maytansinoids as "warheads" in tumor-specific antibodies, preliminary metabolism studies, investigations of their biosynthesis at the biochemical and genetic level, and ecological issues related to the occurrence of such typical microbial metabolites in higher plants.     

A modified internal lock-mass method for calibration of the product ions derived from sustained off-resonance irradiation collision-induced dissociation using a Fourier transform mass spectrometer

A modified internal lock-mass calibration method is introduced for improving the mass measurement accuracy of the product ion spectra derived from sustained off-resonance irradiation collision-induced dissociation (SORI-CID) Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. This method involves an initial external calibration of the Fourier transform mass spectrometer to obtain the initial A- and B-terms for the equation (f(i) = A/(m/z)(i) + B). The A-term is adjusted by using an empirical relationship between the up-shift of the A-term and the pulse-gas duration, whereas the B-term is adjusted by using the mass of the unfragmented precursor ion from the SORI-CID mass spectrum of the unknown sample as internal lock-mass. These adjusted A- and B-terms are then used to provide exact mass SORI-CID calibration for the unknown sample. The modified internal lock-mass method achieved average mass measurement accuracy of approximately 3 ppm which is significantly better than that of the conventional internal lock-mass calibration ( approximately 9 ppm) and is approaching that of the internal calibration ( approximately 2 ppm) and requires no addition of internal calibrant or instrumental modifications.     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

The constituents of the root and stem of Aristolochia heterophylla Hemsl

Seven new compounds, sodium aristolochate-VII (1), aristolactam-CIV (2), madolin-I (3), -J (4), -K (5), -L (6) and -M (7) together with 71 known compounds were isolated and characterized from the fresh root and stem of Aristolochia heterophylla Hemsl. Their structures were determined by spectral methods. Compound 8 was revised as aromadendrane-4beta, 10beta-diol by spectral data and single-crystal X-ray analysis.