Octahedral cobalt(III) complexes of the chloropentammine type. XVII. Association and reaction of some halogenopentamminecobalt(III) and halogenopentamminechromium(III) cations with hydroxide in aqueous dioxan

The replacement, by hydroxide ion, of the coordinated halide from some halogenopentamminecobalt(III) and -Chromium(III) cations in aqueous dioxan has been studied over a range of alkali concentrations up to 0.1 M. With excess of hydroxide ion at constant ionic strength, pseudo first-order rate constants were obtained. The results support a pre-equilibrium association of complex and hydroxide ions in these media, but do not provide distinction as to whether the resulting ion-pair subsequently reacts by direct exchange or by proton removal. The extents of ion association are found to be greater for the cobalt(III) than for the chromium(III) system, increasing with the amount of dioxin in the solvent mixture.     

Ruthenium‐catalyzed synthesis of quinolines via reductive heteroannulation of nitroarenes with 3‐amino‐1‐propanols

Nitroarenes are reductively cyclized with 3‐amino‐1‐propanols in dioxane/H₂O in the presence of a ruthenium catalyst and tin(II) chloride dihydrate together with isopropanol to afford the corresponding quinolines. A reaction pathway involving initial reduction of nitroarenes to anilines, propanol group transfer from 3‐amino‐1‐propanols to anilines, N‐alkylation of anilines by 3‐anilino‐1‐propanols and heteroannulation of 1,3‐dianilinopropanes is proposed.     

Multidimensional high performance liquid chromatography--capillary electrophoresis separation of a protein digest: an update

The trypsin digest of a mixture of two proteins, namely cytochrome c and myoglobin, was first separated in the first dimension by high-performance liquid chromatography (HPLC). Fractions from the HPLC were collected every 30s with the aid of a fraction collector into a 96-well microtiter plate. After concentration, all the collected fractions were analyzed simultaneaosly in the second dimension by a 96-array capillary electrophoresis system. The labeled peptides were detected by laser-induced fluorescence. An internal standard, allura red, was added to all the fractions, prior to capillary electrophoretic analysis. The internal standard serves two functions, migration time correction and signal intensity correction. The data are presented in two different formats, as an electropherogram of all the fractions and in a two-dimensional (2-D) format. The 2-D plot of the data shows the density of each spot, which corresponds to the concentration of the migrating peptides. The total experimental time for the HPLC and capillary electrophoretic analyses ist less than 1 h, which ist much faster than using 2-D slab-gel electrophoresis or single-capillary capillary electrophoresis.     

Theoretical studies on the metathesis processes, (Tp(PH3)MR(eta 2-H[bond]CH3)]-->[Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe,Ru, and Os; R=H and CH3)

Theoretical calculations on the metathesis process, [Tp(PH3)MR(eta 2-H[bond]CH3)] --> [Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3), have been systematically carried out to study their detailed reaction mechanisms. Other than the one-step mechanism via a four-center transition state and the two-step mechanism through an oxidative addition/reductive elimination pathway, a new one-step mechanism, with a transition state formed under oxidative addition, has been found. Based on the intrinsic reaction coordinate calculations, we found that the trajectories of the transferring hydrogen atom in the metathesis processes studied are similar to each other regardless of the nature of reaction mechanisms.     

Application of solid phase microextraction in the determination of paralytic shellfish poisoning toxins

A SPME-HPLC-post-column fluorescent derivatization method for the direct determination of saxitoxin (STX), the most potent paralytic shellfish poisoning (PSP) toxin, in water has been developed. Commercially available SPME devices with 50 microm Carbowax templated resin (CW/TPR) coating was found to be able to pre-concentrate STX from aqueous media. A special pre-conditioning treatment of soaking the SPME coating in 0.1 M NaOH solution significantly improved the extraction efficiency. The optimal pH for the SPME process is 8.1 and the equilibration time is 40 min. The partition coefficient, K, of the distribution of STX between the SPME coating and the aqueous media was measured to be 2.99 +/- 0.04 x 10(3). Extracted toxin on the SPME stationary phase was difficult to be desorbed by the HPLC mobile phase under dynamic desorption mode. A static ion-pairing desorption technique using a desorption solvent mixture of 20 mM sodium 1-heptanesulfonate in 30% aqueous acetonitrile acidified with 50 mM sulfuric acid was developed to overcome this problem. The method detection limit and repeatability achieved by this SPME-HPLC method were 0.11 ng ml(-1) and 3.7%, respectively, with a sample volume of just 5 ml of water. This analytical method is adequate for the monitoring of the PSP toxin in fresh/drinking waters. However, serious interference was observed when this technique was applied to saline water samples. This is probably due to competition of sodium ions with the cationic STX for absorption into the SPME stationary phase.     

Ionic-liquid-supported peptide synthesis demonstrated by the synthesis of Leu(5)-enkephalin

A new strategy for the synthesis of oligopeptides was developed using an ionic liquid as a soluble support. The efficiency of this ionic liquid-phase approach was demonstrated by the synthesis of a bioactive pentapeptide, Leu(5)-enkephalin, in good yield and reasonable purity. The structures and purities of the reaction intermediates in each step were verified easily by routine spectroscopic analysis, and no chromatographic procedures were needed during the synthesis.     

Unusually stable molecular capsule formation of a tetraphenyleneurea cavitand

An unusually stable molecular capsule was formed by heating phenyleneurea-spanned resorcinarene cavitand with 4-methyl-N-p-tolylbenzamide. The molecular capsule behaved as a discrete molecular entity showing a cylindrical D(4d) structure and showed no guest exchange in toluene-d(8) even at 100 degrees C. [structure: see text]     

Contact angle hysteresis, adhesion, and marine biofouling

Adhesive and marine biofouling release properties of coatings containing surface-oriented perfluoroalkyl groups were investigated. These coatings were prepared by cross-linking a copolymer of 1H,1H,2H,2H-heptadecafluorodecyl acrylate and acrylic acid with a copolymer of poly(2-isopropenyl-2-oxazoline) and methyl methacrylate at different molar ratios. The relationships between contact angle, contact angle hysteresis, adhesion, and marine biofouling were studied. Adhesion was determined by peel tests using pressure-sensitive adhesives. The chemical nature of the surfaces was studied by using X-ray photoelectron spectroscopy. Resistance to marine biofouling of an optimized coating was studied by immersion in seawater and compared to previous, less optimized coatings. The adhesive release properties of the coatings did not correlate well with the surface energies of the coatings estimated from the static and advancing contact angles nor with the amount of fluorine present on the surface. The adhesive properties of the surfaces, however, show a correlation with water receding contact angles and contact angle hysteresis (or wetting hysteresis) resulting from surface penetration and surface reconstruction. Coatings having the best release properties had both the highest cross-link density and the lowest contact angle hysteresis. An optimized coating exhibited unprecedented resistance to marine biofouling. Water contact angle hysteresis appears to correlate with marine biofouling resistance.     

DFT study and Monte Carlo simulation on proton transfers of 2-amino-2-oxazoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline in the gas phase and in water

Density functional theory (DFT) and Monte Carlo (MC) simulation with free energy perturbation (FEP) techniques have been used to study the tautomeric proton transfer reaction of 2-amino-2-oxazoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline in the gas phase and in water. Two reaction pathways were considered: the direct and water-assisted transfers. The optimized structures and thermodynamic properties of stationary points for the title reaction system in the gas phase were calculated at the B3LYP/6-311+G(d, p) level of theory. The potential energy profiles along the minimum energy path in the gas phase and in water were obtained. The study of the solvent effect of water on the proton transfer of 2-amino-2-oxozoline, 2-amino-2-thiazoline, and 2-amino-2-imidazoline indicates that water as a solvent is favorable for the water-assisted process and slows down the rate of the direct transfer pathway.