Comparison of gas chromatographic and high-performance liquid chromatographic assays for the determination of debrisoquine and its 4-hydroxy metabolite in human fluids

A comparison of an established gas chromatographic assay for 4-hydroxydebrisoquine and debrisoquine and a modified high-performance liquid chromatographic assay was made. Both assays used guanoxan as the internal standard and required derivatization of all three compounds with acetylacetone at 96 degrees C for 2.5 h and subsequent ethereal extraction and cleaning steps before chromatographic analysis. For detailed pharmacokinetic studies the gas chromatographic assay was more sensitive in the measurement of low concentrations in plasma, but the liquid chromatographic assay was adequate for phenotyping the 4-hydroxylation of debrisoquine in a population. In the latter assay a mobile phase consisting of 70% methanol in water at pH 3.5 (adjusted with orthophosphoric acid containing 10 mM 1-pentanesulphonic acid was employed (flow-rate 1.5 ml/min) with a pre-column (C8) linked to a reversed-phase muBondapak C18 cartridge in a Z-module. The eluate was detected at 248 nm. With this assay it was observed that the buccal absorption of debrisoquine and 4-hydroxy-debrisoquine was affected by the pH of the buccal medium. This indicates that urinary pH may influence the excretion of both substances at high pH. The debrisoquine-to-4-hydroxydebrisoquine ratio may be dose-dependent.     

Dissolution of ionisable groups and lignocellulosic components during low-temperature kraft pulping of pinus radiata

A wide range of kraft pulps from radiata pine produced by low-temperature kraft pulping in flow-through reactors was assessed for carboxyl and hexenuronic acid (HexA) contents using the conductometric titrations and UV spectrophotometer, respectively. The Kappa number of pulps varied from 20.8 to 84.7 when using a cooking liquor of 1 M effective alkali as Na₂O, 25% sulfidity, and cooking time of 100–250 min. The experimental results showed that the carboxyl groups (including HexA) and HexA groups dissolved and their residual values in the pulp samples correlate linearly with Kappa number and pulp yield. The dissolving rate of all carboxyl groups is much faster than the loss of HexA. The HexA/lignin ratio decreased non-linearly with Kappa number.     

Quantitative analysis of the low molecular weight serum proteome using 18O stable isotope labeling in a lung tumor xenograft mouse model

With advancements in the analytical technologies and methodologies in proteomics, there is great interest in biomarker discovery in biofluids such as serum and plasma. Current hypotheses suggest that the low molecular weight (LMW) serum proteome possesses an archive of clipped and cleaved protein fragments that may provide insight into disease development. Though these biofluids represent attractive samples from which new and more accurate disease biomarkers may be found, the intrinsic person-to-person variability in these samples complicates their discovery. Mice are one of the most extensively used animal models for studying human disease because they represent a highly controllable experimental model system. In this study, the LMW serum proteome was compared between xenografted tumor-bearing mice and control mice by differential labeling utilizing trypsin-mediated incorporation of the stable isotope of oxygen, 18O. The digestates were combined, fractionated by strong cation exchange chromatography, and analyzed by nanoflow reversed-phase liquid chromatography coupled online with tandem mass spectrometry, resulting in the identification of 6003 proteins identified by at least a single, fully tryptic peptide. Almost 1650 proteins were identified and quantitated by two or more fully tryptic peptides. The methodology adopted in this work provides the means for future quantitative measurements in comparative animal models of disease and in human disease cohorts.     

Preparation of ordered large pore SBA-15 silica functionalized with aminopropyl groups through one-pot synthesis

Highly ordered large pore SBA-15 silica functionalized with up to 16% aminopropyl groups, which gave high catalytic activity and selectivity toward flavanone synthesis through aldol condensation and subsequent intramolecular Michael addition of benzaldehyde and 2'-hydroxyacetophenone, was synthesized for the first time via co-condensation of tetraethylorthosilicate (TEOS) and 3-aminopropyltriethoxysilane (APTES) using an amphiphilic block copolymer as the structure-directing agent.     

Oxidation of dibenzothiophene catalyzed by heme-containing enzymes encapsulated in sol-gel glass

We have encapsulated several hemoproteins in the sol-gel glass to catalyze the oxidation reaction of dibenzothiophene (model for organic sulfur compounds in coal) with hydrogen peroxide. In addition to cytochrome c and myoglobin, which have previously been encapsulated in sol-gel glasses, two other hemoproteins, horseradish peroxidase and bovine blood hemoglobin, have now been successfully immobilized in sol-gel media with the retention of their spectroscopic properties. All four hemoproteins studied also demonstrate similar catalytic activities toward the oxidation of dibenzothiophene as compared with the results obtained with the proteins in solution. In the case of encapsulated cytochrome c, the more water-soluble S-oxide was obtained with much higher selectivity over the less water-soluble sulfone (S-oxide/sulfone = 7.1) as compared to what was obtained in the aqueous/organic medium (S-oxide/sulfone = 2.3). Because of the advantage of easy separation of the encapsulated proteins from the liquid reaction mixture, it is clear from these studies that the immobilization of active hemoproteins in the solid glass media could serve as more practical biocatalysts.     

Metal speciation using capillary electrophoresis--inductively coupled plasma atomic emission spectrometry and polytetrafluoroethylene capillaries

A capillary electrophoresis--inductively coupled plasma atomic-emission spectrometry (CE-ICP-AES) system using a polytetrafluoroethylene (PTFE) capillary has been developed. The CE-ICP interface was a modified concentric nebulizer. The PTFE capillary (50 microm internal diameter) was used as the central capillary of the nebulizer. Using the PTFE capillaries, the solution flow rate induced by the carrier gas flow was smaller than that of glass capillary. Solution flow was mainly induced by the CE electric field. Baseline separation of Ba2+/Mg2+ ion pair using simple buffer solution of 0.014 M sodium acetate was reported. Separation and correlation of metal species in metallothioneins (MT-1 and MT-2 in MT) of rabbit liver using the CE-ICP system were also discussed.     

Development of high-performance liquid chromatographic fingerprints for distinguishing Chinese Angelica from related umbelliferae herbs

A high-performance liquid chromatographic (HPLC) fingerprint of Chinese Angelica (CA) was developed basing on the consistent chromatograms of 40 CA samples (Angelica sinensis (Oliv.) Diels). The unique properties of this HPLC fingerprints were validated by analyzing 13 related herbs including 4 Japanese Angelicae Root samples (JA, A. acutiloba Kitagawa and A. acutiloba Kitagawa var. sugiyame Hikino), 6 Szechwan Lovage Rhizome samples (SL, Ligusticum chuanxiong Hort.) and 3 Cnidium Rhizome samples (CR, Cnidium officinale Makino). Both correlation coefficients of similarity in chromatograms and relative peak areas of characteristic compounds were calculated for quantitative expression of the HPLC fingerprints. The amount of senkyunolide A in CA was less than 30-fold of that in SL and CR samples, which was used as a chemical marker to distinguish them. JA was easily distinguished from CA, SL and CR based on either chromatographic patterns or the amount of coniferyl ferulate. No obvious difference between SL and CR chromatograms except the relative amount of some compounds, suggesting that SL and CR might have very close relationship in terms of chemotaxonomy. Ferulic acid and Z-ligustilide were unequivocally determined whilst senkyunolide I, senkyunolide H, coniferyl ferulate, senkyunolide A, butylphthalide, E-ligustilide, E-butylidenephthalide, Z-butylidenephthalide and levistolide A were tentatively identified in chromatograms based on their atmospheric pressure chemical ionization (APCI) MS data and the comparison of their UV spectra with those published in literatures.