Synthesis of New C2‐Symmetric Chiral Bisamides from (1S,2S)‐Cyclohexane‐1,2‐dicarboxylic Acid

A series of new C₂‐symmetric (1S,2S)‐cyclohexane‐1,2‐dicarboxamides was synthesized from (1S,2S)‐cyclohexane‐1,2‐dicarbonyl dichloride and N‐benzyl‐substituted aromatic amines, which were prepared from 2‐aminopyridine, 2‐chloroaniline, and 2‐aminophenol via imine formation with benzaldehyde and subsequent reduction with NaBH₄. (1S,2S)‐N,N′‐Dibenzyl‐N,N′‐bis[2‐(benzyloxy)phenyl]cyclohexane‐1,2‐dicarboxamide was converted to (1S,2S)‐N,N′‐dibenzyl‐N,N′‐bis(2‐hydroxyphenyl)cyclohexane‐1,2‐dicarboxamide via hydrogenolysis in the presence of Pd(OH)₂ on active carbon powder.     

Optimized precursor ion selection for labile ions in a linear ion trap mass spectrometer and its impact on quantification using selected reaction monitoring

The fragmentation of fragile ions during the application of an isolation waveform for precursor ion selection and the resulting loss of isolated ion intensity is well‐known in ion trap mass spectrometry (ITMS). To obtain adequate ion intensity in the selected reaction monitoring (SRM) of fragile precursor ions, a wider ion isolation width is required. However, the increased isolation width significantly diminishes the selectivity of the channels chosen for SRM, which is a serious problem for samples with complex matrices. The sensitive and selective quantification of many lipid molecules, including ceramides from real biological samples, using a linear ion trap mass spectrometer is also hindered by the same problem because of the ease of water loss from protonated ceramide ions. In this study, a method for the reliable quantification of ceramides using SRM with near unity precursor ion isolation has been developed for ITMS by utilizing alternative precursor ions generated by in‐source dissociation. The selected precursor ions allow the isolation of ions with unit mass width and the selective analysis of ceramides using SRM with negligible loss of sensitivity. The quantification of C18:0‐, C24:0‐ and C24:1‐ceramides using the present method shows excellent linearity over the concentration ranges from 6 to 100, 25 to 1000 and 25 to 1000 nM, respectively. The limits of detection of C18:0‐, C24:0‐ and C24:1‐ceramides were 0.25, 0.25 and 5 fmol, respectively. The developed method was successfully applied to quantify ceramides in fetal bovine serum. Copyright © 2014 John Wiley & Sons, Ltd.     

硬脂酸聚氧乙烯酯与聚乙烯接枝共聚物的制备与表征

以聚氧乙烯为起始原料,合成了一系列硬脂酸聚氧乙烯酯及其丙烯酸酯,用FTIR和1H NMR测试技术对其结构进行了表征,用最大气泡法测定了其表面张力.以其作为接枝单体,利用反应挤出接枝方法制备了系列功能化聚乙烯,用FTIR确定了接枝共聚物的结构和接枝率;用DSC、接触角测量仪对接枝共聚物的热性能、结晶行为和表面性质进行了测试分析.结果表明,含有不同分子量(200、600、1 000、2 000和6 000)聚氧乙烯的硬脂酸聚氧乙烯酯的表面张力分别为30.19、32.22、35.30、38.39和43.37 mN/m;相应的聚乙烯接枝共聚物的结晶温度分别为109.30、109.08、110.18、109.74和109.74℃,水接触角分别为81.060、70.100、72.25°、76.加.和95.55°.随着聚氧乙烯分子量的增加,表面活性剂的表面活性降低;聚乙烯接枝共聚物的结晶温度高于线形低密度聚乙烯(LLDPE,T.=104.95℃),且其亲水性得到改善(纯聚乙烯的水接触角103°).     

Rhodium‐Catalyzed Ketone Methylation Using Methanol Under Mild Conditions: Formation of α‐Branched Products

The rhodium‐catalyzed methylation of ketones has been accomplished using methanol as the methylating agent and the hydrogen‐borrowing method. The sequence is notable for the relatively low temperatures that are required and for the ability of the reaction system to form α‐branched products with ease. Doubly alkylated ketones can be prepared from methyl ketones and two different alcohols by using a sequential one‐pot iridium‐ and rhodium‐catalyzed process.     

Elevated Catalytic Activity of Ruthenium(II)–Porphyrin‐Catalyzed Carbene/Nitrene Transfer and Insertion Reactions with N‐Heterocyclic Carbene Ligands

Bis(NHC)ruthenium(II)–porphyrin complexes were designed, synthesized, and characterized. Owing to the strong donor strength of axial NHC ligands in stabilizing the trans M?CRR′/M?NR moiety, these complexes showed unprecedently high catalytic activity towards alkene cyclopropanation, carbene C? H, N? H, S? H, and O? H insertion, alkene aziridination, and nitrene C? H insertion with turnover frequencies up to 1950 min^?1. The use of chiral [Ru(D₄‐Por)(BIMe)₂] ( 1 g ) as a catalyst led to highly enantioselective carbene/nitrene transfer and insertion reactions with up to 98 % ee. Carbene modification of the N terminus of peptides at 37 °C was possible. DFT calculations revealed that the trans axial NHC ligand facilitates the decomposition of diazo compounds by stabilizing the metal–carbene reaction intermediate.     

Simultaneous spreading and evaporation: Recent developments

The recent progress in theoretical and experimental studies of simultaneous spreading and evaporation of liquid droplets on solid substrates is discussed for pure liquids including nanodroplets, nanosuspensions of inorganic particles (nanofluids) and surfactant solutions. Evaporation of both complete wetting and partial wetting liquids into a nonsaturated vapour atmosphere are considered. However, the main attention is paid to the case of partial wetting when the hysteresis of static contact angle takes place. In the case of complete wetting the spreading/evaporation process proceeds in two stages. A theory was suggested for this case and a good agreement with available experimental data was achieved. In the case of partial wetting the spreading/evaporation of a sessile droplet of pure liquid goes through four subsequent stages: (i) the initial stage, spreading, is relatively short (1–2 min) and therefore evaporation can be neglected during this stage; during the initial stage the contact angle reaches the value of advancing contact angle and the radius of the droplet base reaches its maximum value, (ii) the first stage of evaporation is characterised by the constant value of the radius of the droplet base; the value of the contact angle during the first stage decreases from static advancing to static receding contact angle; (iii) during the second stage of evaporation the contact angle remains constant and equal to its receding value, while the radius of the droplet base decreases; and (iv) at the third stage of evaporation both the contact angle and the radius of the droplet base decrease until the drop completely disappears. It has been shown theoretically and confirmed experimentally that during the first and second stages of evaporation the volume of droplet to power 2/3 decreases linearly with time. The universal dependence of the contact angle during the first stage and of the radius of the droplet base during the second stage on the reduced time has been derived theoretically and confirmed experimentally. The theory developed for pure liquids is applicable also to nanofluids, where a good agreement with the available experimental data has been found. However, in the case of evaporation of surfactant solutions the process deviates from the theoretical predictions for pure liquids at concentration below critical wetting concentration and is in agreement with the theoretical predictions at concentrations above it.     

N-Bromosuccinimide-mediated reaction of cyclic styrenes with chloramine-T

A facile route toward substituted allylic sulfonamides 3 is developed from the N-bromosuccinimide (NBS)-mediated allylic amination of cyclic styrenes 2 with chloramine-T (1a). Skeleton 2 is prepared by Grignard addition of cyclic ketones with different arylmagnesium bromides in THF followed by dehydration of the resulting tertiary alcohols with BF₃·OEt₂ in CH₂Cl₂. The synthetic route obtained moderate yields from the one-step operation and the key structures of skeleton 3 were confirmed by X-ray crystallographic analysis.     

A concise approach to CF3-containing furan-3-ones, (bis)pyrazoles from novel fluorinated building blocks based on 2,3-butanedione

1,1,1-Trifluoro-4,5,5-trimethoxyhex-3-en-2-one and lithium (2Z)-1,1,1-trifluoro-5,5-dialkoxy-4-oxohex-2-en-2-olate were synthesized for the first time via direct trifluoroacetylation of 2,3-butanedione acetal derivatives. A simple and effective approach to acetal or acyl substituted CF₃-pyrazoles, 5,5′-bis(trifluoromethyl)-3,3′-bipyrazole, and, to 5-trifluoromethylfuran-3-ones is presented.     

Synthesis, structure and dioxygen reactivity of a bis(micro-iodo)dicopper(I) complex supported by the [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine ligand

The air-sensitive bis(micro-iodo)dicopper(I) complex 1 supported by [N-(3,5-di-tert-butyl-2-hydroxybenzyl)-N,N-di-(2-pyridylmethyl)]amine (L) has been prepared by treating copper(I) iodide with L in anhydrous THF. Compound 1 crystallizes as a dimer in space group C2/c. Each copper(I) center has distorted tetrahedral N2I2 coordination geometry with Cu-N(pyridyl) distances 2.061(3) and 2.063(3) A, Cu-I distances 2.6162(5) and 2.7817(5) and a Cu...Cu distance of 2.9086(8) A. Complex 1 is rapidly oxidized by dioxygen in CH2Cl2 with a 1 : 1 stoichiometry giving the bis(micro-iodo)peroxodicopper(II) complex [Cu(L)(micro-I)]2O2 (2). The reaction of 1 with dioxygen has been characterized by UV-vis, mass spectrometry, EPR and Cu K-edge X-ray absorption spectroscopy at low temperature (193 K) and above. The mass spectrometry and low temperature EPR measurements suggested an equilibrium between the bis(micro-iodo)peroxodicopper(II) complex 2 and its dimer, namely, the tetranuclear (peroxodicopper(II))2 complex [Cu(L)(micro-I)]4O4 (2'). Complex 2 undergoes an effective oxo-transfer reaction converting PPh3 into O=PPh3 under anaerobic conditions. At sufficiently high concentration of PPh3, the oxygen atom transfer from 2 to PPh3 was followed by the formation of [Cu(PPh3)3I]. The dioxygen reactivity of 1 was compared with that known for other halo(amine)copper(I) dimers.