On the apparent molar volumes of nonelectrolytes in water

Apparent molar volumes of aqueous solutions of argon and xenon have been calculated using a previously developed comprehensive equation of state for nonelectrolyte systems. The equation consists of a virial expansion truncated after the fourth virial coefficient and a closed-form term approximating higher coefficients. Mixing rules are based on the composition dependence of virial coefficients, which is known from statistical mechanics. The equation accurately represents vapor-liquid and gas-gas equilibria for the Ar+H₂O and Xe+H₂O systems over wide ranges of pressure and temperature using two binary parameters. With the binary parameters determined from phase equilibrium data, the equation accurately predicts apparent molar volumes V in the near-critical and far-from-critical regions. Apart from reproducing experimental V data, the equation reveals remarkable maxima of V as a function of pressure and temperature in the near-critical region. The implications of this equation with respect to the Ar–H₂O potential are discussed via the second virial coefficient.     

富氧条件下乙炔选择催化还原NOx

Acetylene as a reducing agent of metal exchanged HY catalysts, for selective catalytic reduction of NO in the reaction system of 0.16% NO, 0 （C2H2-SCR） was investigated over a series 08% C2H2, and 9.95% O2 （volume percent） in He. 75% of NO conversion to N2 with hydrocarbon efficiency about 1.5 was achieved over a Ce-HY catalyst around 300 ℃. The NO removal level was comparable with that of selective catalytic reduction of NOx by C3H6 reported in literatures, although only one third of the reducing agent in carbon moles was used in the C2H2-SCR of NO. The protons in zeolite were crucial to the C2H2-SCR of NO, and the performance of HY in the reaction was significantly promoted by cerium incorporation into the zeolite. NO2 was proposed to be the intermediate of NO reduction to N2, and the oxidation of NO to NO2 was rate-determining step of the C2H2-SCR of NO over Ce-HY. The suggestion was well supported by the results of the NO oxidation with O2, and the C2H2 consumption under the conditions in the presence or absence of NO.     

New Stephaoxocane Alkaloids from Stephania longa

Three new stephaoxocane‐type alkaloids, stephalonganines A–C ( 1 – 3 ), together with the known eletefine ( 4 ), were isolated from the whole plant of Stephania longa. Their structures were fully characterized spectroscopically, and the absolute configurations of the new alkaloids were assigned by comparison of their circular‐dichroism (CD) data with those of 1,2‐dihydrostephaoxocanine ( 5 ), in combination with 2D‐NMR experiments.     

Surface plasmon resonance spectroscopy and quartz crystal microbalance study of streptavidin film structure effects on biotinylated DNA assembly and target DNA hybridization

Surface plasmon resonance (SPR) spectroscopy is employed for the study of biotinylated DNA assembly on streptavidin modified gold surfaces for target DNA hybridization. Two immobilization strategies are involved for constructing streptavidin films, namely, (1) physical adsorption on biotin-containing thiol treated surfaces through biotin-streptavidin links and (2) covalent attachment to 11-mercaptoundecanoic acid (MUA) treated surfaces through amine coupling. To understand the structural properties of the streptavidin films, a quartz crystal microbalance with energy dissipation monitoring (QCM-D) is used to monitor the streptavidin immobilization procedures. The simultaneously measured frequency (Deltaf) and dissipation factor (DeltaD) changes, together with the SPR angle shifts (Deltatheta), suggest that the streptavidin film assembled on the biotin-containing surface is highly rigid with a well-ordered structure while the streptavidin film formed through amine coupling is highly dissipative and less structured. The subsequent biotinylated DNA (biotin-DNA) assembly and target hybridization results show that the streptavidin film structure has distinct effects on the biotin-DNA binding amount. On the streptavidin matrix, not only the probe DNA density but also the strand orientation mediated by the streptavidin films has distinct effects on hybridization efficiency. Particularly, the molecularly ordered streptavidin films formed on the biotin-containing surfaces ensure a well-ordered DNA assembly, which in turn allows for a higher efficiency in target DNA capture and for a higher sensitivity in the hybridization analysis when compared to the biotin-DNA assembled on the less structured streptavidin films formed through amine coupling.     

Synthesis of the lipophilic antifolate piritrexim via a palladium(0)-catalyzed cross-coupling reaction

[reaction: see text] A regiospecific and convergent route the lipophilic antifolate piritrexim (PTX) is described in which a key step is a Pd(0)-catalyzed cross-coupling reaction between 2-amino-3-cyano-4-methyl-5-bromopyridine and 2,5-dimethoxybenzylzinc chloride to form 2-amino-4-methyl-5-(2,5-dimethoxybenzyl)nicotinonitrile. To complete the synthesis, the amino group is replaced by a more reactive bromine atom via nonaqueous diazotization with tert-butyl nitrite, and the resultant bromo nitrile is cyclized with guanidine.     

Migration behavior and enantioseparation of hydrobenzoin and structurally related compounds in capillary zone electrophoresis with a dual cyclodextrin system consisting of heptakis-(2,3-dihydroxy-6-O-sulfo)-beta-cyclodextrin and beta-cyclodextrin

Migration behavior and enantioseparation of racemic hydrobenzoin and structurally related compounds, including benzoin and benzoin methyl ether, in CZE with a dual CD system consisting of heptakis-(2,3-dihydroxy-6-O-sulfo)-beta-CD (SI-S-beta-CD) and beta-CD as chiral selectors in the presence and absence of borate complexation at pH 9.0 were investigated. The results indicate that enantioseparation of hydrobenzoin is mainly governed by CD complexation of hydrobenzoin-borate complexes with SI-S-beta-CD when SI-S-beta-CD concentration is relatively high. Whereas CD complexation of hydrobenzoin-borate complexes with beta-CD plays a significant role in enantioseparation when SI-S-beta-CD concentration is comparatively low. The (S,S)-enantiomer of the hydrobenzoin-borate complex was found to interact more strongly than the corresponding (R,R)-enantiomer with both SI-S-beta-CD and beta-CD. These two types of CD show the same chiral recognition pattern, but they exhibit opposite effects on the mobility of the enantiomers of hydrobenzoin-borate complexes. Enantiomer migration reversal of hydrobenzoin occurred in the presence of borate complexation when varying the concentration of beta-CD, while keeping SI-S-beta-CD at a relatively low concentration. Binding constants of the enantiomers of benzoin-related compounds to beta-CD and those of hydrobenzoin-borate complexes to SI-beta-CD were evaluated; the mobility contributions of all complex species to the effective mobility of the enantiomers of hydrobenzoin as a function of beta-CD concentration in a borate buffer were analyzed. In addition, comparative studies on the enantioseparation of benzoin-related compounds with SI-S-beta-CD and with randomly sulfate-substituted beta-CD were made.     

Comparative study of electrochemically directed assembly versus conventional self-assembly of thioacetyl-terminated oligo(phenylene ethynylene)s on gold and platinum surfaces

The assembly of thioacetyl-terminated oligo(phenylene ethynylene)s (OPEs) on Au and Pt surfaces under an electric potential (electrochemical assembly, EA) was compared to assembly at an open circuit (conventional self-assembly, CSA). Cyclic voltammetry and ellipsometry were used to characterize the adsorption kinetics of self-assembled monolayers formed by these two techniques. The adsorption rate of the EA was remarkably faster at positive potentials but slower at negative potentials than that of the CSA, The EA at 400 mV proceeded about 800 times faster than the CSA when exposed to the same solution concentrations. The adsorption rates of both EA and CSA were found to be dependent on the molecular structures of OPEs. OPEs containing electron-donating groups assemble faster than those with electron-withdrawing groups. The amount of time that the thioacetyl-terminated OPE is in the presence of the base, for removal of the acetyl group to generate the thiolate, is called the deprotection time. Deprotection times play a critical role in achieving the maximum difference in adsorption rates between the EA and the CSA. The assembly must be initiated no later than 5 min after the basic deprotection is commenced so that the thiolate concentration remains low. The difference in the adsorption rates between EA and CSA might enable selective deposition of certain OPEs onto specific electrodes.     

The first mu3-oxalato-bridged copper complex with tridentate Schiff base ligand N-ethyl-N'-salicylidene-1,2-diaminoethane: synthesis,structure, and magnetic properties

The first mu(3)-oxalato-bridged copper(II) complex, [[Cu(3)(L)(3)(mu(3)-C(2)O(4))][Cu(L)(H(2)O)](ClO(4))(2)] x 0.5(H(2)O) x 0.5(CH(3)OH), where HL = N-ethyl-N'-salicylidene-1,2-diaminoethane, has been synthesized and characterized by variable-temperature magnetic susceptibility measurement. The complex exhibits ferromagnetic coupling between the oxalato-bridged copper atoms and antiferromagnetic coupling between the oxygen-bridged copper atoms.     

A facile electrochemical synthesis of caffeic acid derivatives in the presence of acetylacetone or methyl acetoacetate in aqueous medium

The anodic oxidation of caffeic acid in the presence of acetylacetone or methyl acetoacetate in aqueous solution has been studied by cyclic voltammetry and controlled-potential electrolysis techniques. The result showed that caffeic acid was oxidized to the corresponding o-benzoquinone, which underwent further Michael-addition with acetylacetone or methyl acetoacetate to produce caffeic acid derivative 3,4-dihydroxy-6-(1-acetylacetone)-yl cinnamic acid 4a or 3,4-dihydroxy-6-(1-acetyl-methylacetate)-yl cinnamic acid 4b.     

Synthesis and characterization of second-order nonlinear optical polyurethane with high thermal stability

A second-order nonlinear optical polyurethane was formed with an X-type multi-dimensional charge-transfer (CT) chromophore (DNPIPDHPI) and 3,3^′-dimethoxy-4,4^′-diphenyl diisocyanate. Simultaneous poling and polymerization and in situ second harmonic generation (SHG) measurement technique was carried on to evaluate the thermal stability of the poling induced orientation. The SHG signal of the poled polymer film was not decay below 150 °C and remains 90% of relative d₃₃ value at 200 °C, which is better than the results reported in literature. Comparison of thermal stability indicates that the X-type chromophores possess better property in controlling the decay of the SHG activity than classic chromophores.