Luminescence and EPR studies of Eu doped BaAl12O19 blue light emitting phosphors

Europium doped BaAl₁₂O₁₉ powder phosphors have been synthesized by combustion process within few minutes. The phosphors have been characterized by XRD, SEM, FT-IR, EPR and PL techniques. The EPR spectrum exhibits an intense resonance signal at g=1.96 characteristic of Eu²⁺ ions. In addition to this two weak resonance signals have been observed at g=2.28 and g=4.86. The population of the spin levels (N) for the resonance signal at g=1.96 is calculated as a function of temperature. By post-treating the phosphor at 1350 °C under a reducing atmosphere, it is observed that the population of spin levels has been increased five times. The excitation spectrum shows a peak at 326 nm with a shoulder at 290 nm. Upon excitation at 326 nm, the emission spectrum exhibits a well defined broad band with maximum at 444 nm emitting a blue light corresponding to 4f⁶5d→4f⁷ transition. The luminescence intensity also has been enhanced to 60% by post-treating the phosphor at 1350 °C under a reducing atmosphere.     

Characterization,EPR and photoluminescence studies of LiAl5O8:Cr phosphors

Red emitting Cr³⁺ doped LiAl₅O₈ powder phosphor was prepared by combustion route using corresponding metal nitrates and urea in a single step. The prepared powder was characterized by X-ray diffraction and surface area measurements were carried out by Brunauer–Emmet–Teller adsorption isotherms. The electron paramagnetic resonance spectrum in the low field regions is typical for isolated Cr³⁺ ions whereas the resonance signal in the high field region with g = 1.95 is due to exchange coupled Cr³⁺–Cr³⁺ pairs. The optical studies show two broad and intense bands characteristic of Cr³⁺ ions in distorted octahedral symmetry. The photoluminescence spectrum gives a narrow red emission at 710 nm corresponding to ²E_g → ⁴A_2g transition upon excitation of 562 nm. The crystal field parameter (Dq), Racah inter-electronic repulsion parameters (B and C) and nephelauxetic parameters have been evaluated and discussed.     

Photoluminescence and EPR studies of BaMgAl10O17:Eu phosphor with blue-emission synthesized by the solution combustion method

A blue phosphor, BaMgAl₁₀O₁₇:Eu²⁺, has been synthesized in the furnace at a temperature of 500 °C by solution combustion method. The formation of the as-prepared BaMgAl₁₀O₁₇:Eu²⁺ phosphor was confirmed by the powder X-ray diffraction technique. The EPR spectrum exhibited an intense resonance signal centered at g=4.63 at 150 mT along with a number of resonances in the vicinity of g>2.0 and g<2.0. The number of spins participating in resonance (N) and the susceptibility (c) for the resonance signal at g=4.63 have been calculated as a function of temperature. The excitation spectrum of BaMgAl₁₀O₁₇:Eu²⁺ phosphor showed a strong peak near 336 nm (4f⁷ (⁸S)→5d¹(t_2g) transition) with a staircase like structure in the region 376-400 nm owing to crystal field splitting of the Eu²⁺ d-orbital. The 336 nm excitation produced a broad blue emission at 450 nm corresponding to 4f⁶5d→4f⁷ transition. PL studies reveal the two emission centers one at 450 nm and the other at 490 nm in this phosphor.     

Adsorption and dissociation kinetics of alkanes on CaO(100)

The adsorption kinetics of ethane, butane, pentane, and hexane on CaO(100) have been studied by multi-mass thermal desorption (TDS) spectroscopy. The sample cleanliness was checked by Auger electron spectroscopy. A molecular and dissociative adsorption pathway was evident for the alkanes, except for ethane, which does not undergo bond activation. Two TDS peaks appeared when recording the parent mass, which are assigned to different adsorption sites/configurations of the molecularly adsorbed alkanes. Bond activation leads to desorption of hydrogen and several alkane fragments assigned to methane and ethylene formation. Only one TDS feature is seen in this case. Formation of carbon residuals was absent.     

A rapid and highly sensitive method for the determination of glimepiride in human plasma by liquid chromatography-electrospray ionization tandem mass spectrometry: application to a pre-clinical pharmacokinetic study

A sensitive and specific liquid chromatography-positive electrospray ionization-tandem mass spectrometry method has been developed and validated for the determination of glimepiride (GPD) in human plasma. GPD and the internal standard (IS, glibenclamide) were extracted from a small aliquot of human plasma (200 microL) by a simple liquid-liquid extraction technique using ethyl acetate as extraction solvent. The compounds were separated on a YMC Propack, C18, 4.6x50 mm column using a mixture of ammonium acetate buffer, acetonitrile and methanol (30:60:10, v/v) as mobile phase at 0.5 mL/min on an API 4000 Sciex mass spectrometer connected to an Agilent HPLC system. Method validation and pre-clinical sample analysis was performed as per FDA guidelines and the results met the acceptance criteria. GPD and IS were detected without any interference from human plasma matrix. The method was proved to be accurate and precise at linearity range of 0.02-100.00 ng/mL with a correlation coefficient of 0.999. The method was robust with a lower limit of quantitation of 0.02 ng/mL. Intra- and inter-day accuracies for GPD were 88.60-113.50 and 96.82-103.93%, respectively. The inter-day precision was better than 12.21%. This method enabled faster and reliable determination of GPD in a pre-clinical study.     

Transparent hydrophobic and superhydrophobic coatings fabricated using polyamide 12–SiO2 nanocomposite

Optically transparent hydrophobic and superhydrophobic coatings have been prepared using polyamide 12–SiO₂ nanocomposite (NC) on glass substrates by the spin‐coating method. The coatings have been optimized for their hydrophobicity and transparency. The transformation from hydrophobic to superhydrophobic is achieved with increase in roughness (R_a) which increases with SiO₂ content. These coatings are highly transparent in the entire visible region (400–800 nm). The influence of layer thickness on water contact angle (WCA) and optical transmittance of the coatings has been studied. Field emission scanning electron micrograph (FESEM) shows the presence of SiO₂ nanoparticles covered with polyamide homogenously on the surface and the particles are aggregated to form a rough structure. X‐ray diffraction (XRD) patterns show that the polyamide losses its crystalline structure in the composite. The preparation procedure reported here is simple and eco‐friendly. The dual nature of the coatings, that is, high transparency and superhydrophobicity in the entire visible region suggests for its potential usage in self‐cleanings, wind screen and optoelectronic applications. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermoluminescence,photoluminescence and EPR studies on Mn2+ activated yttrium aluminate (YAlO3) perovskite

Thermoluminescence (TL) measurements were carried out on undoped and Mn²⁺ doped (0.1 mol%) yttrium aluminate (YAlO₃) nanopowders using gamma irradiation in the dose range 1–5 kGy. These phosphors have been prepared at furnace temperatures as low as 400 °C by using the combustion route. Powder X-ray diffraction confirms the orthorhombic phase. SEM micrographs show that the powders are spherical in shape, porous with fused state and the size of the particles appeared to be in the range 50–150 nm. Electron Paramagnetic Resonance (EPR) studies reveal that Mn ions occupy the yttrium site and the valency of manganese remains as Mn²⁺. The photoluminescence spectrum shows a typical orange-to-red emission at 595 nm and suggests that Mn²⁺ ions are in strong crystalline environment. It is observed that TL intensity increases with gamma dose in both undoped and Mn doped samples. Four shouldered TL peaks at 126, 240, 288 and 350 °C along with relatively resolved glow peak at 180 °C were observed in undoped sample. However, the Mn doped samples show a shouldered peak at 115 °C along with two well defined peaks at ～215 and 275 °C. It is observed that TL glow peaks were shifted in Mn doped samples. The kinetic parameters namely activation energy (E), order of kinetics (b), frequency factor (s) of undoped, and Mn doped samples were determined at different gamma doses using the Chens glow peak shape method and the results are discussed in detail.     

Luminescence and defect studies of YAlO3:Dy3+, Sm3+ single crystals exposed to 100 MeV Si7+ ion beam

Ionoluminescence (IL) and photoluminescence (PL) spectra for different rare earth ions (Sm³⁺ and Dy³⁺) activated YAlO₃ single crystals have been induced with 100 MeV Si⁷⁺ ions with fluence of 7.81×10¹² ions cm^?2. Prominent IL and PL emission peaks in the range 550–725 nm in Sm³⁺ and 482–574 nm in Dy³⁺ were recorded. Variation of IL intensity in Dy³⁺ doped YAlO₃ single crystals was studied in the fluence range 7.81×10¹²–11.71×10¹² ions cm^?2. IL intensity is found to be high in lower ion fluences and it decreases with increase in ion fluence due to thermal quenching as a result of an increase in the sample temperature caused by ion beam irradiation. Thermoluminescence (TL) spectra were recorded for fluence of 5.2×10¹² ions cm^?2 on pure and doped crystals at a warming rate of 5 °C s^?1 at room temperature. Pure crystals show two glow peaks at 232 (Tg₁) and 328 °C (Tg₂). However, in Sm³⁺ doped crystals three glow peaks at 278 (Tg₁), 332 (Tg₂) and 384 °C (Tg₃) and two glow peaks at 278 (Tg₁) and 331 °C (Tg₂) in Dy³⁺ was recorded. The kinetic parameters (E, b s) were estimated using glow peak shape method. The decay of IL intensity was explained by excitation spike model.     

EPR as an analytical tool in assessing the mineral nutrients and irradiated food products-vegetables

EPR spectral investigations of some commonly available vegetables in south India, which are of global importance like Daucus carota (carrot), Cyamopsis tetragonoloba (cluster beans), Coccinia indica (little gourd) and Beta vulgaris (beet root) have been carried out. In all the vegetable samples a free radical corresponding to cellulose radical is observed. Almost all the samples under investigation exhibit Mn ions in different oxidation states. The temperature variation EPR studies are done and are discussed in view of the paramagnetic oxidation states. The radiation-induced defects have also been assessed by using the EPR spectra of such irradiated food products.     

Electronic absorption spectra and energy gap studies of Er3+ ions in different chlorophosphate glasses

Spectroscopic properties of Er3+ ions in different chlorophosphate glasses 50P2O5-30Na2HPO4-19.8RCl (R = Li, Na, K, Ca and Pb) are studied. The direct and indirect optical band gaps (Eopt) and the various spectroscopic parameters (E1, E2, E3, and zeta4f and alpha) are reported. The oscillator strengths of the transitions in the absorption spectrum are parameterized in terms of three Judd-Ofelt intensity parameters (omega2, omega4 and omega6). These intensity parameters are used to predict the transition probabilities (A), radiative lifetimes (tauR), branching ratios (beta) and integrated cross sections (sigma) for stimulated emission. Attention has been paid to the trend of the intensity parameters over hypersensitive transitions and optical band gaps. The lifetimes and branching ratios of certain transitions are compared with other glass matrices.