An application of perturbation theory ideas in configuration interaction calculations

Configuration interaction calculations of electronic wave functions for atoms and molecules have generally been limited to relatively small basis sets because of the exponential increase in the number of configurations as basis functions are added. While higher than quadruply excited configurations are of negligible importance in CI wave functions, it is shown that the effect of triple and quadruple excitation configurations can be substantially included even when the matrix elements between such configurations are neglected, leaving only their diagonal elements and the elements connecting them with the single and double excitations. This approximation is seen to be formally practically equivalent to a first-order perturbation expression for the wave function (second-order for the energy) based on an optimum linear combination of the zero, single, and double excitation configurations as the zero-order function. If suitable procedures are used, the amount of computational effort involved in such a calculation is roughly proportional to the fourth power of the number of basis functions employed, thus preventing the CI stage of the calculation from increasing in magnitude much faster than the stages involving the calculation and manipulation of the elementary integrals.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Transport properties of alkanes through ceramic thin zeolite MFI membranes

Polycrystalline randomly oriented defect free zeolite layers on porous α-Al₂O₃ supports are prepared with a thickness of less than 5 μm by in situ crystallisation of silicalite-1. The flux of alkanes is a function of the sorption and intracrystalline diffusion. In mixtures of strongly and weakly adsorbing gases and a high loadings of the strongly adsorbing molecule in the zeolite poze, the flux of the weakly adsorbing molecule is suppressed by the sorption and the mobility of the strongly adsorbing molecule resulting in pore-blocking effects. The separation of these mixtures is mainly based on the sorption and completely different from the permselectivity. At low loadings of the strongly adsorbing molecules the separation is based on the sorption and the diffusion and is the same as the permselectivity. Separation factors for the isomers of butane (n-butane/isobutane) and hexane (hexane/2,2-dimethylbutane) are respectively high (10) and very high (> 2000) at 200°C. These high separation factors are a strong evidence that the membrane shows selectivity by size-exclusion and that transport in pores larger than the zeolite MFI pores (possible defects, etc) can be neglected.     

EPR study of free radicals in a main chain thermotropic polymer

Free radicals were generated in a rigid rod-like copolymer via mechanical route and by gamma radiation. The (EPR) method was used for studying free radicals formed at 123 K. The spectra of free radicals observed and the influence of molecular motions on the transport of radical centers in the fracture surface layer are discussed.     

The determination of trace amounts of tin by flow-injection hydride generation atomic-absorption spectrometry with on-line ion-exchange separation and preconcentration

A hydride generation atomic-absorption spectrometric (AAS) method with flow-injection (FI), aimed at developing a practical routine assay for the determination of tin in food digests, is described. In order to modify the sample matrix and to achieve optimized and reproducible conditions for the hydride generation reaction, the analyte is initially converted into its chlorostannate-complex thereby allowing it to be separated and preconcentrated on-line on an incorporated micro-column packed with a strongly basic anion exchanger and subsequently to be eluted by diluted nitric acid under strictly controlled conditions. Optimum acidic conditions for the FI hydride generation AAS system was found to be 0.01-0.05M nitric acid. At a consumption of 2.7-ml sample volume, aspirated by time-based injection, the procedure resulted in an enrichment factor of 3.5 and yielded a detection limit of 0.08 microg/l. (3sigma) at a sampling frequency of 72/hr. The precision was 2.5% rsd at the 10 microg/l. level. Potential interferents, such as Ni(II), Co(II), Zn(II) and Fe(III) could, at a Sn level of 10 microg/l., be tolerated at an excess of 1000 times without impairing the assay, while a 100-1000-fold excess of Cu(II) decreased the signal by 10-15%. Recoveries in the range 94-102% were obtained for canned food sample digests spiked with 10 microg/l. Sn.     

Organometallic complex compounds,part 6(1). Property-specific ligand control of stability and reactivity of (1,3-dimethyl-η3-allyl)methylnickel-ligand complexes. Separation of electronic and steric effects

Summary The property-specific ligand control of 28 ligands on the decomposition temperatures in solution, measured by d.t.a. of a four-coordinate nickel(II)-complex is reported. A quantitative separation of electronic and steric effects by a multilinear regression analysis (75% electronic and 25% steric influence for the chosen ligands) is presented. The controlling effect of the selectivity on the decomposition (fraction of the C-C-linked product) (25 P-ligands) leads to an electronic: steric ratio of the property-specific ligand control of 5545 for the chosen ligands. An increase in the relative acceptor character of the P-ligands relatively destabilizes the complexes and thereby favours formation of a C-C-bond. An increase in steric hindrance also favours C-C-bond formation. A method for revising the steric parameter of P-ligands is presented and is used to correct the -value of (PhCH₂)₃P is corrected to 135°. SCCC-MO-calculations for testing the chemical reasoning of the separated electronic and steric ligand property control are shown.     

Quasi-column chromatography of barbituric acid derivatives II. Separation on Non-polar adsorbents using binary water-organic solvent mixtures as the mobile phase

Summary Twenty barbituric acid derivatives having four different types of substitution were separated in TLC-S chambers. Using non-polar adsorbents (silanized silica gel or silica gel coated with paraffin oil) and binary water-organic solvent mixtures as the mobile phase. Linear relationships between R_M and the concentration of the organic solvent were observed for the majority of the investigated compounds. The non-polar absorbents ensure a better separation than untreated silica gel especially for the therapeutically useful C₅ disubstituted barbiturates. The results can be used for the optimization of the systems for the chromatography of barbiturates. The R_f values were correlated with the number of carbon atoms of the substitutions, molecular connectivity and a parameter associated with the molecular volume. The best correlations were obtained for this last parameter.     

A chalcone from cotton plant flowers

Summary It has been shown that 1-(D--ribopyranosyl)indole isomerizes under the action of acids to form 1-(D--ribofuranosyl)indole.Khimiya Prirodnykh Soedinenii, Vol. 4, No. 2, pp. 128–129, 1968     

Physisorption of molecular oxygen on C60 thin films

The interaction of oxygen molecules with a fullerene surface has been studied using high resolution electron energy loss spectroscopy and temperature programmed desorption. Vibrational excitation of the adsorbed oxygen is observed at 190 meV, an energy value comparable with that for molecular oxygen in the gas phase. We take this to indicate physisorption of molecular oxygen on the C(60) surface. Thermal desorption results also show that the bonding of oxygen molecules to the C(60) overlayer is comparable to that on a graphite surface. A detailed study of the energy dependence of the vibrational excitation reveals an inelastic electron resonance scattering process. The angular dependence of the resonant vibrational excitation exhibits features distinctively different from those for molecular oxygen physisorbed on the related graphite surface, at a comparable coverage. One possible reason is that the corrugated surface potential, due to the curvature of the C(60) molecules, promotes the preferential ordering of the physisorbed oxygen molecules perpendicular to the surface plane of the C(60) overlayer.