Nonlinear ellipsometric method for measuring second-order cascaded phase shift

An ellipsometric method for measuring second-order cascaded phase shift is experimentally demonstrated in a KNbO(3) single crystal. We analyze the polarization state composed of the two orthogonal polarizations of the transmitted fundamental wave, one of which experiences intensity-dependent depletion and phase shift while the other does not. This method does not require a well-defined beam profile or interferometric stability.     

Chemodosimetric Hg2+-selective signaling by mercuration of dichlorofluorescein derivatives

The chemodosimetric behavior of dichlorofluorescein derivatives toward Hg(2+) ions was investigated. Simple chemodosimetric systems showed selective and efficient signaling behaviors toward micromolar concentrations of Hg(2+) ions over other common interfering metal ions in an aqueous environment. The signaling mechanism is selective mercuration of the 4',5'-position of the xanthene moiety, which results in efficient chromogenic and fluorogenic signaling of Hg(2+) ions in aqueous environment.     

Spectroscopic observation of critical guest concentration appearing in tert-butyl alcohol clathrate hydrate

The tert-butyl alcohol (TBA) is the most hydrophobic of the simple alcohol and by itself does not form a clathrate hydrate with water. A genuine clathrate hydrate is synthesized by exposing a gaseous guest to solid TBA + H2O powders. Here, we examine three consecutive spectroscopic approaches of (1) the occurrence of a "free" OH stretching band (nu(OH)) signal of TBA molecules representing an absence of hydrogen bonding between the host water and guest TBA, (2) a tuning effect for creating fresh cages via the rearrangement of the host-water lattice, and finally (3) the existence of a critical guest concentration (CGC) that appears only when the TBA concentration is dilute. The present findings from this simple three-step approach can be extended to other alcoholic guest species with the specific modifications to provide the new insights into inclusion chemistry.     

Preparation and X-ray structures of 3-[Bis(trifluoroacetoxy)iodo]benzoic acid and 3-[hydroxy(tosyloxy)iodo]benzoic acid: new recyclable hypervalent iodine reagents

Preparation, structural characterization, and reactivity of 3-[bis(trifluoroacetoxy)iodo]benzoic acid and 3-[hydroxy(tosyloxy)iodo]benzoic acid, new recyclable iodine(III) reagents derived from 3-iodosylbenzoic acid, are described. The reduced form of these reagents, 3-iodobenzoic acid, can be easily recovered from the reaction mixtures using ion-exchange resin or basic aqueous workup followed by acidification with HCl.     

Structural transformation due to Co-host inclusion in ionic clathrate hydrates

The present findings on the co-host role in restructuring the host water framework might provide important information on tuning the cage dimensions via lattice distortion and promoting the total number of cages via structural transformation. This co-host-induced structural modification can improve the physicochemical properties of ionized clathrate hydrates, particularly given that the host framework is able to function as a pathway to deliver protons or electrons.     

Utilizing broadband X‐rays in a Bragg coherent X‐ray diffraction imaging experiment

A method is presented to simplify Bragg coherent X‐ray diffraction imaging studies of complex heterogeneous crystalline materials with a two‐stage screening/imaging process that utilizes polychromatic and monochromatic coherent X‐rays and is compatible with in situ sample environments. Coherent white‐beam diffraction is used to identify an individual crystal particle or grain that displays desired properties within a larger population. A three‐dimensional reciprocal‐space map suitable for diffraction imaging is then measured for the Bragg peak of interest using a monochromatic beam energy scan that requires no sample motion, thus simplifying in situ chamber design. This approach was demonstrated with Au nanoparticles and will enable, for example, individual grains in a polycrystalline material of specific orientation to be selected, then imaged in three dimensions while under load.     

Vast magnetic monolayer film with surfactant-stabilized Fe3O4 nanoparticles using Langmuir-Blodgett technique

Although several methods (e.g., self-assembly, spin coating, etc.) have been explored for making a monolayer film of nanoparticles, the monolayer on a substrate is typically smaller than 1 micromx1 microm in certain regions. The approach is not ideally suitable for generating a highly ordered and close-packed homogeneous vast monolayer of nanoparticles, which is potentially important for applications. In this report, the preparation of the vast monolayer films of Fe3O4 nanoparticles with a wide range such as that over 3.25 micromx3.95 microm is reported. Their TEM images showed a two-dimensional assembly of Fe3O4 nanoparticles, demonstrating the uniformity of these nanoparticles. The formation of a Langmuir monolayer of the oleic acid-coated Fe3O4 nanoparticles mixed with stearic acid molecules at the air/water interface and its stability were studied with a pressure-area isotherm curve. TEM and BAM studies demonstrated that increasing surface pressure resulted in a transition from well-separated domains of nanoparticles complex to well-compressed, monoparticulate layers.     

Synthesis of poly(sorbitan methacrylate) hydrogel by free-radical polymerization

Hydrogels are materials with the ability to swell in water through the retention of significant fractions of water within their structures. Owing to their relatively high degree of biocompatibility, hydrogels have been utilized in a host of biomedical applications. In an attempt to determine the optimum conditions for hydrogel synthesis by the free-radical polymerization of sorbitan methacrylate (SMA), the hydrogel used in this study was well polymerized under the following conditions: 50% (w/v) SMA as monomer, 1% (w/w) alpha, alpha'-azo-bis(isobutyro-nitrile) as thermal initiator, and 1% (w/w) ethylene glycol dimethacrylate as cross-liking agent. Under these conditions, the moisture content of the polymerized SMA hydrogel was higher than in the other conditions. Moreover, the moisture content of the poly(SMA) hydrogel was also found to be higher than that of the poly(methyl methacrylate [MMA]) hydrogel. When the Fourier transform-infrared spectrum of poly(SMA) hydrogel was compared with that of poly(MMA) hydrogel, we noted a band at 1735-1730/cm, which did not appear in the Fourier transform-infrared spectrum of poly(MMA). The surface of the poly(SMA) hydrogel was visualized through scanning electron microscopy, and was uniform and clear in appearance.     

Resolution of infrared matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using glycerol; enhancement with a disperse laser beam

Some experimental factors affecting the resolution in glycerol infrared matrix-assisted laser desorption/ionization (IR-MALDI) time-of-flight (TOF) mass spectrometry were investigated. Loading the sample inside a cavity covered with a grid was found to improve the resolving power as reported previously, although not to the extent attainable in UV-MALDI using the same instrument. The resolving power improved as the laser spot area at the sample position got larger, becoming almost comparable with that in UV-MALDI when the spot area was a little larger than the cavity size. Reduced concentration of the ablated materials in the acceleration region with the use of the grid and large irradiation area may be responsible for the enhanced resolution. In addition, the threshold laser fluences measured in this work were lower than those reported in the literature and tended to decrease more rapidly as the irradiation area increased than predicted previously. The implication of similar threshold fluences for matrix and analyte ions is discussed in relation to the analyte ion formation mechanism.